TuneZilla TCU software for Audi 8P A3 and VW Mk5, Mk6 2.0L TDI vehicles equipped with a 6-Speed DQ250 DSG transmission.
Fitment/Applications:
- 2009-2010 VW Mk5 Jetta 2.0L TDI
- 2009 VW Mk5 Jetta Sportwagen 2.0L TDI
- 2010-2014 VW Mk6 Golf 2.0L TDI
- 2010-2014 VW Mk6 Jetta Sportwagen 2.0L TDI
- 2011-2015 VW Mk6 Jetta 2.0L TDI
- 2012-2015 VW Beetle 2.0L TDI
- 2009-2014 Audi 8P A3 2.0L TDI
Available TCU Stages:
DSG Tune for Stage 3 or Lower:
This Stage 3 DSG tune can be comfortably paired with a completely stock engine (ECU) all the way up to Stage 3 ECU tune. If the vehicle has a Stage 4 ECU tune, then please choose a Stage 4 DSG tune.
This transmission tune increases the torque limit and in most cases lowers the RPM shift points to stay in the best performance and efficiency range. Shifts are smoother and quicker. The gear number indicator is also added to the instrument cluster in most cases.
|
ECU Tune |
DSG Tune |
|---|---|
|
Stock |
Compatible |
|
Stage .5 |
Recommended |
|
Stage 1 |
Required |
|
Stage 2 |
Required |
|
Stage 3 |
Required |
|
Stage 4 |
Not Compatible |
Requires
This TCU tune is REQUIRED if you want to run a Stage 1 ECU tune up to Stage 3 ECU tune in in your DSG equipped vehicle.
You CAN use this DSG tune with a stock ECU or Stage 0.5 ECU. It is not required.
Stage 4 DSG Tune
This Stage 4 DSG tune should be paired with a Stage 4 or higher ECU tune. It has the same features of the Stage 3 DSG tune, plus the following:
- Higher RPM shift points that take advantage of a larger turbo sustaining more boost at higher RPM. Not recommended for Stage 3 and smaller turbos.
- Further increased clutch clamping pressure (note: DSG clutch adaptation is required, see below).
Requires
This is REQUIRED with a Stage 4 or custom engine tune in in your DSG equipped vehicle.
You CAN use this DSG tune with a stock ECU or Stage 0.5 ECU. However, due to stronger clutch clamping pressure, you may feel firmer shifts than a Stage 3 DSG tune.
- After flashing your TCU, you must Reset the following parameters in your TCU basic settings (using VCDS or similar)
- Reset Clutch Characteristic
- Reset Logging Data for Clutch 1
- Reset Logging Data for Clutch 2
- These parameters must be reset otherwise clutch pressures will not increase
Installation Options
Choose between installing yourself, or if you're local to us, our Aberdeen, MD shop can install this tune for you.
At Home Installation
In order to install this tune yourself, you will need a FlashZilla Pro tuning device and a computer installed with a Windows 10 or newer operating system. You may add a FlashZilla Pro to your order by selecting the option above.
If you already have access to a FlashZilla Pro tuning device, simply select the option above and we'll contact you about how you can add this tune to your existing account or how to create a new one if you don't already have one.
Professional Installation
If you are local to our Aberdeen, MD shop and would prefer to have us install this tune for you, please select the option above, place your order and we will contact you to set up an appointment.
