Racingline Twin Dogbone Mount Inserts - VW MQB/MQB EVO

Racingline
VWR150003
Direct Ship
$113.39
$113.39

The Racingline Audi/VW MQB Twin Dogbone Inserts fill the large voids in the factory lower engine mount with two billet inserts, limiting drivetrain movement for greatly improved strength and a much more enjoyable drive.

What do they do?

The RacingLine upper and lower Twin Dogbone Mount Insert is one of the most affordable and transformative upgrades you can do to your MQB/MQB Evo car.

By slipping the RacingLine Twin Dogbone Insert into the voids of your factory lower engine mount you will stiffen the whole location of the drivetrain greatly to give a much tighter, sharper, more responsive feeling to your car.

Crucially, fitting both the two-piece upper and lower inserts of the RacingLine Twin Dogbone Insert eliminates the bending forces that can cause damage and ultimately failure if just one insert is fitted (as many others offer).

  • The RacingLine Twin Dogbone Insert limits the compliance of the lower engine mount by filling the large voids with our two billet inserts.
  • All of the forwards/backwards rocking movement in your drivetrain is controlled by this Lower Mount – fitment of the RacingLine Twin Dogbone Insert adds strength to the drivetrain, helping to protect from future wear and breakages.
  • The risk of wheel-hop under hard acceleration is almost eliminated as the whole engine and 'box assembly is firmly prevented from juddering when wheelspin occurs and through aggressive gearchages.
  • Fitment of the Twin Inserts will only add a minimal increase NVH to the car’s characteristics, but most keen drivers love the sense that they are more 'connected' to their car, and the gentle 'growl' that the mount conveys.

Which Version Do I Need?

The factory mount comes in two version across MQB models. To ensure correct fitment for your vehicle, please visually verify the mount you have using the illustration below, then select the correct insert version via the option above. Alternatively, if you happen to know the part number of the dogbone mount bushing in your car, you may select the version you need using this information.

  • OE part: 5Q0 198 037 A – You’ll require the Version 1 Insert
  • OE part: 5Q0 198 037 F – You’ll require the Version 2 Insert

Fitment/Applications:

  • 2022+ VW Mk8 GTI, Golf R
  • 2015-2021 VW Mk7, Mk7.5 Golf, GTI, Golf R
  • 2015-2020 VW Mk7, Mk7.5 Golf Sportwagen, Alltrack
  • 2019+ VW Mk7 GLI
  • 2019+ VW Arteon
  • 2018+ VW Tiguan (does not fit Tiguan Limited)
  • 2022+ Audi 8Y A3, S3, RS3
  • 2015-2020 Audi 8V A3, S3, RS3
  • 2015-2023 Audi 8S TT, TTS, TTRS

Installation Instructions:

Dogbone mount pucks shown for example only and are not included.

Read More
Read Less

Your cart

×