Questions? We've got answers.

Integrated Engineering Audi CREC 3.0T Supercharged Performance ECU Tune - Audi C7.5 A6 & A7

IESOVJ21
Direct Ship
$899.00
$899.00

Integrated Engineering Audi CREC 3.0T Supercharged Performance ECU Tune - Audi C7.5 A6 & A7

EASY POWER FOR YOUR CREC 3.0T EQUIPPED AUDI C7.5 A6 AND A7!

Your 2016-2018 Audi A6/A7 3.0T with the updated CREC supercharged engine capable of massive power gains in only minutes from an IE ECU Tune. Unleash hidden horsepower and torque to turn your sporty A6 or A7 into an extremely competitive powerhouse!

  • Stage 1 - Gain up to 166hp on stock hardware
  • Stage 2 - Up to 524hp with a supercharger pulley upgrade

MAXIMIZED OUTPUT

IE ECU calibrations are dedicated to perfecting every section of the mapping to deliver a fully realized performance file right out of the gate. Maximized for full performance potential on the drag strip and road coarse while maintaining full comfort and reliability on your daily commute. Get ready to experience IE's Performance Software For your Audi CREC 3.0T Supercharged engine in only minutes from the comfort of your home garage or driveway.

POWER RESULTS

  • Stock Audi advertised numbers - 340 HP / 333 FT-LBS
  • Stock IE dyno numbers - 340 HP / 347 FT-LBS
  • Stage 1 91 Octane - 423 HP / 384 FT-LBS
  • Stage 1 93 Octane - 432 HP / 391 FT-LBS
  • Stage 1 E85 - 506 HP / 414 FT-LBS
  • Single Pulley 91 Octane - 438 HP / 388 FT-LBS
  • Single Pulley 93 Octane - 446 HP / 395 FT-LBS
  • Single Pulley E85 - 524 HP / 438 FT-LBS

REQUIRED HARDWARE

STAGE 1

  • Transmission Tune - Required For Peak Power Gains
  • Air Intake - Fully Compatible With All Stages
  • Heat Exchanger - Fully Compatible With All Stages
  • Aftermarket Downpipes - Fully Compatible With All Stages
  • Upper Pulley - Not Compatible With Stage 1
  • Lower Pulley - Not Compatible With Stage 1

STAGE 2 SINGLE PULLEY

  • Upper Puley - Required
  • Heat Exchanger - Required
  • Transmission Tune - Required For Peak Power Gains
  • Air Intake - Fully Compatible With All Stages
  • Aftermarket Downpipes - Fully Compatible With All Stages
  • Lower Pulley - Not Compatible With Stage 1

ADD TRANSMISSION TUNE

All stages of IE ECU calibrations for the C7.5 A6 & A7 are compatible with the matching IE ZF8 AL551 Transmission TCU Tune and is highly recommended to reach the advertised power figures. Without a matching TCU tune, the transmission will short shift the powerband at 6300 RPM vs. the ECU tune's peak power at 7200RPM -leaving power on the table. Adding the TCU upgrade also modifies shift speed, torque limit maps, line pressure, and launch control functions resulting in a complete ECU & TCU performance package.

EASY INSTALL FROM HOME

IE's POWERlink Cable and Flash Wizard software gives you the freedom to quickly flash your new IE ECU Tune. Simply plug your POWERlink into the vehicle's OBD-2 port and follow the on-screen directions, it's that easy!

E85 ETHANOL

E85 fuel unlocks the most performance potential from our ECU tunes for your Audi A6 or A7 3.0T. Ethanol contains tons of oxygen, burns cooler, and has a high resistance to knock. This provides more horsepower and torque than running conventional gasoline and is more readily available (in most states) and less expensive than race gas. Safeguards are included within the E85 ECU calibrations to adjust for ethanol as low as E60 to allow safe fill ups even if the ethanol content is lower than advertised. E85 is an optional fuel map included with all tune purchases.

BRAKE BOOST

Commonly used in roll racing, Brake Boosting allows you to build extra boost by applying brake pressure while accelerating. Release the brake pressure for a "rolling launch" or extra surge of power. Brake Boost is included on all tune stages.

INCREASED RPM

Take full advantage of your supercharger with a larger power band. RPM limits have been raised to 7200RPM in all stages. This higher RPM limit not only extends the power band, but also unlocks 20+HP in the upper RPM range! Transmission TCU Tune is required to unlock higher RPM.

OPTIMIZED COOLING

To combat power-robbing heat soak generated from the supercharged engine the factory coolant pump calibration has been modified in all ECU Tune stages. This new configuration runs the coolant pump at 50% duty when the ignition is keyed on pushing coolant through the charge coolers and reducing heat faster without the engine running. This helps avoid heat soak and provides faster recovery in-between runs or while staging at the track. During driving or when the intake temp is above 20C, the coolant pump operates at 100% for maximum cooling efficiency.

RELIABILITY TESTING

IE's fully proven software brings track-ready ECU programming to your supercharged V6 engine while retaining factory comfort and reliability. IE's own tuning technology suite is used to completely reverse-engineer the factory ECU mapping, allowing our software engineers access to realign all safety protocols and sensors for the new performance calibration. Every tune parameter undergoes months of testing on our in-house dyno systems that utilize the world's only Sea Level Generator developed specifically to verify tune operations in any condition. Confidently drive from LA to Pikes Peak with power that will keep you smiling every mile!

FITMENT/APPLICATIONS

  • 2016-2018 Audi C7.5 A6 3.0T Supercharged (CREC engine code)
  • 2016-2018 Audi C7.5 A7 3.0T Supercharged (CREC engine code)

WHAT IS CREC? CREC is the engine code for the updated 3.0T Supercharged engines found in 2016-2018 Audi A6 & A7 chassis. The CREC variation includes numerous changes from the previous generations of the 3.0T platform including a dual direct and port injection fuel system, supercharger refinements, a new ECU, and many other changes. The easiest way to verify if you have a CREC engine is to check the upper supercharger pulley; CREC is equipped with a 4 bolt supercharger pulley where as all previous gen engines have a press-on pulley. Still not sure? Don't worry, our IE POWERlink cable will identify the correct tune for you car automatically.

Once a tune purchase is applied to your vehicle's ECU, the tune is permanently registered to the vehicle and non-transferable to other vehicles. Tune can be transferred to a second party in the event of vehicle transfer of ownership only.

Try IE software for 45 days from shipment date, if for any reason you are unsatisfied the tune may be removed and refunded risk-free.

CONSUMER NOTICE: BY PURCHASING A MOTORSPORT/RACING PRODUCT ("PRODUCT"), YOU REPRESENT THAT YOU UNDERSTAND AND AGREE THAT: THE PRODUCT IS NOT DESIGNED TO MEET ANY APPLICABLE EMISSIONS STANDARDS, WHETHER IN THE USA OR OTHERWISE, THE PRODUCT IS NOT C.A.R.B. COMPLIANT, AND THAT THE PRODUCT IS NOT FOR SALE OR USE IN CALIFORNIA, USA NOR ANY OTHER JURISDICTION WHERE THE SALE OR USE IS PROHIBITED BY LAW. INTEGRATED ENGINEERING, LLC MAKES NO REPRESENTATIONS, WARRANTIES, OR CLAIMS THAT THIS PRODUCT COMPLIES WITH ANY APPLICABLE EMISSIONS LAWS AND EXPRESSLY DISCLAIMS ANY AND ALL SUCH REPRESENTATIONS, WARRANTIES, AND CLAIMS, WHETHER EXPRESS OR IMPLIED. BY PURCHASING THIS PRODUCT, YOU REPRESENT, WARRANT, AND AGREE THAT IT IS YOUR RESPONSIBILITY TO INFORM YOURSELF OF ANY LAWS OR REGULATIONS THAT MAY APPLY TO YOUR PURCHASE AND/OR USE OF THE PRODUCT.

Read More
Read Less

Your cart

×