Priced Individually - Bosch 65lb (650cc) High-Z (impedance) Fuel Injector - Commonly used in 2.0 ABA and Mk2 / Mk3 VR6 12v engines. Medium-angle single spray cone with good atomization. Frequently rated at 650cc/65#.
Bosch 65lb/hour 650cc with EV6 / USCAR Connector – 0280158117-650
NOTE: Adapters are required for use in Audi/VW applications and are not included.
- For use with 1.8T, 2.7T, VR6 and many other vehicles
Genuine Bosch High Impedance Injectors
These injectors flow 65 lbs/hr at 43.5 PSI ( 3 BAR ) and more at higher PSI. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector. These injectors represent the most current Bosch engineering and are used on many high power oem applications.
These injectors are able to function at high fuel pressures and dont exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. Many tuners push these injectors to 6 bar and higher.
Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors pencil stream high flow injectors; these High Flow injectors utilize a multi-orifice tip for improved mixture preparation and atomization. This results in lower BSFC and better idle quality than many injectors with less flow.
Features:
- Genuine, reliable Bosch Injectors
- Excellent response characteristics
- Robust Design
- High Impedance
- Low Impedance performance characteristics with High Impedance Compatibility
Specifications:
- Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
- Spray Pattern: Wide Split Cone, (6 orifice)
- Electrical Connector: USCAR (New-style V=EV6 / Oval / LS2)
- Fitted with Viton upper and lower o-rings.
- Static Flow Rate @ 43.5PSI (300kPa): 65 lb/hr = 6.52g/s = 650cc/min
- Overall Length: 65.5mm
- Dimensions: 48.5mm o-ring seat to seat, 53.5mm o-ring centerline to centerline
Applications:
Perfect for 2V, 3V, 4V head applications looking for a high flow, wide dynamic range injector with superb idle quality
Cross Reference:
Bosch 0 280 158 117 (0280158117-650)