APR C7 / C7.5 S6 / S7 4.0 TFSI Catback Exhaust System - With Center Muffler

This version of the APR C7 / C7.5 S6 and S7 exhaust system includes a center muffler section. As a result, it is the quieter of the two exhaust configurations.

The APR Catback Exhaust System personalizes your vehicle’s looks, sound and performance. Beautifully hand-crafted T304-stainless-steel components adorn the system with stunning TIG-welding throughout. APR's straight-through brushed-finished mufflers smooth the exhaust note to a deep growl, without adding restrictions. Strong high-quality bracketry and OEM-style clamps hold the system steadily in place, making the install or removal a snap, and fitment simple, yet precise. Cast 2.75” to dual 2.5” rear splitter creates an ultra-smooth transition, steadily feeding exhaust gasses out of the system. APR's cast valve housings enable the vehicle to be fitted with the factory electronic valve actuators, retaining OEM valve operation.  Finally, removable 4" polished slash-cut exhaust tips finish the system, adding a classy motorsport-inspired touch to the rear of the vehicle. Optional tip upgrades and downpipes are available as well.

Quick Facts:

• T304 stainless-steel construction
• Argon-back-purged TIG welding throughout
• Dual 2.75" to quad 2.5" mandrel-bent brushed tubing
• Ultra-smooth cast 2.75" to dual 2.5" splitters
• Brushed-finished center muffler included
• Polished 4" slash-cut exhaust tips (removable and upgradable)
• Cast valve housings and brackets for OEM electronic actuators
• Rugged and precise mounting brackets
• CNC bent and laser cut tunnel brace for added chassis rigidity
• OEM style slip clamps and Torca AccuSeal T304 tip clamps
• Direct fit to the OEM and APR Race DP exhaust systems
• Low-profile design, suitable for lowered vehicles
• Larger diameter piping compared to stock
• Larger diameter tips compared to stock
• Designed, developed, assembled and quality controlled in-house
• Easy to install
• Limited lifetime warranty

System Overview:

APR's exhaust system uses larger piping compared to the factory exhaust system, yet weighs less in the base configuration. APR uses dual 2.75" OD piping, which then splits to a quad 2.5" design. The factory system uses 2.375" piping . Finally, APR's system’s 4" exhaust tips dwarf the factory tips, giving the rear of the vehicle a sportier look. The system shown in the picture above shows the center muffler, which is included in this version of the exhaust system.

Mufflers

The mufflers are responsible for reducing the exhaust note and do so without adding unnecessary restrictions to the system. Each unit features two straight-through perforated tubes that are tightly wrapped with stainless steel and fiberglass material. With the valves closed, the system is tamer, but once opened, the system sounds deep, throaty and aggressive! The mufflers have a beautiful brushed finish, and are tucked high in the exhaust tunnel, making them perfect for lowered vehicles and a treat to see when looking at the vehicle from the rear.

Cast Splitter

We cast the rear muffler splitters to maximize the system’s performance by keeping exhaust velocity high and back pressure low. This is accomplished by gradually splitting the system from a single 2.75” pipe to dual 2.5” pipes. The organically shaped casting allows us to make this transition gradually as to not disturb the flow of gasses.

Valves

APR's system features two valves that allow control of the volume of the system via the factory exhaust valve actuators. In doing so, the system can go from tame to aggressive instantly! Unlike pneumatic systems, and other common valves found in the market today, APR's system maintains identical OEM operation all the way down to the factory valve actuation angles. Furthermore, the system is compatible with aftermarket exhaust remotes, allowing end users to manually open the system at the click of a button.

We cast the valve housings out of T304 stainless-steel. Internally the system uses CNC-machined T303 components and brass bushings, which have stood up to APR's extreme torture testing. All necessary hardware is welded into place and is designed to combat heat and vibration for years to come.

Tubing

We use T304 stainless steel tubing throughout. We brush and de-burr all pipes, use mandrel bending techniques to ensure the pipes keep a constant diameter throughout, and use argon-back purged TIG welding for a strong and attractive weld.

Standard Included Tips

APR's polished slash-cut 4” exhaust tips upgrade the rear of the vehicle dramatically. The motorsport-inspired tips tuck nicely into the factory valance, gently following the valance’s curves and demanding all the right attention in all the right places. We laser etch a small and discreet APR logo onto the top of each tip, and we use T304 stainless Torca AccuSeal clamps that bolt on with ease with hardware that rotates out of sight. Lastly, since the tips are removable, you can upgrade to any one of APR's optional tip designs at any time.

Tunnel Brace

The factory stamped steel tunnel brace leaves little to be desired. APR has designed theirs to sit slightly lower in the tunnel to allow for larger exhaust tubing. As an added benefit, the CNC-bent laser-cut brace adds additional structural rigidity to the chassis!

Optional Parts: 

Double Walled Exhaust Tips

If the standard single-walled tips aren't your thing, upgrade to APR's double-walled tips. Featuring several different finishes, these tips are designed to give you that extra bit of style. Available in brushed, polished and diamond black and 3.5" or 4" sizes. The option above will add the two tip kits required for this exhaust system.

Fitment/Applications

• 2013-2018 C7, C7.5 S6 4.0T
• 2012-2018 C7, C7.5 S7 4.0T