APR - Audi B8 A4 / A5 / Q5 K04 Upgrade - Valvelift 2.0T
APR's S3 K04 Turbo Conversion is now available for the Audi B8 A4/A5 and Q5 2.0 TFSI Valvelift engine.
- Fits the following vehicles:
- -B8 A4 2.0t - Sedan and Avant, 6-speed or Tiptronic
- -B8 A5 2.0t - Coupe and Cabriolet, 6-speed or Tiptronic
- -Q7 2.0t - Tiptronic only
APR has developed an excellent entry level turbocharger upgrade for the 2.0 TFSI VL engine by incorporating the OEM turbocharger assembly from the Audi S3 and coupling it with APR's expertly recalibrated engine management upgrade. APR's Engineering Team has developed a powerful and reliable turbocharger upgrade that maintains OEM engine bay appearance and offers up to 116 hp and 113 lb ft of torque over the OEM power output of the 2.0 TFSI.
Reliability, drivability, stealth and enhanced performance that cannot be bested are the highlights of APR's newest OEM-component based conversion package.
APR's engineers have expertly recalibrated the engine management system to allow for nearly flat torque delivery from 2800 RPM to 5000 RPM which results in a smooth linear pull throughout the power band. Keeping the track enthusiast in mind, this conversion package will not result in overpowering of the driveline but will allow for smooth acceleration to easily maintain control while cornering.
The Borg Warner K04 turbocharger selected by VAG engineers is perfectly sized for the 2.0 liters of displacement to allow for stout horsepower numbers as the RPMs increase with no dramatic fall off as redline approaches. This ensures plenty of power in the high RPMs for continued acceleration in the straights and positioning at the healthiest portion of the power band after corner exit.
Optional OEM Exhaust Compatibility
While a full exhaust is recommended for maximum power, If you're in a situation where running a high flow exhaust is not permissible, APR has also developed software specifically to use with your OEM Exhaust system. You may switch between high flow exhaust software or OEM exhaust software free of charge any time you alter your exhaust system.
| Program Mode* | Peak HP | Peak TQ | Largest HP Gain Over Stock | Largest TQ Gain Over Stock | Speed Limit |
|---|---|---|---|---|---|
| *It is essential to ensure your vehicle is filled with at least the minimum octane rating for each Performance Calibration when activating the program. | |||||
| ¹Figures measured using Stock Intercoolers, Stock intake and APR RSC Turboback Single Exit Exhaust System. | |||||
| Stock - OEM Operation | 212 HP | 267 LB-FT | - | - | 127 MPH |
| APR 91 Octane (R+M)/2 or 95 RON | TBA | TBA | TBA | TBA | Unlimited |
| APR 93 Octane (R+M)/2 or 98 RON¹ | 313 HP | 367 LB-FT | 116 HP @ 5550 RPM | 113 LB-FT @ 4950 RPM | Unlimited |
| APR 100 Octane (R+M)/2 or 104 RON | TBA | TBA | TBA | TBA | Unlimited |
| APR Valet | Limited Output | Limited Output | Limited Output | Limited Output | 70 MPH |
- Components - APR includes all hardware and software needed for a painless install:
- APR DPP ECU Upgrade Specific to the S3 K04 Turbo Conversion
- APR Audi S3 K04 Turbocharger Assembly
- OEM Manifold Gasket and Nuts (5x)
- OEM Exhaust Gasket, Bolts (3x), Washers (3x) and Nuts (3x)
- OEM Downpipe Gasket, Studs (4x) and Nuts (4x)
- OEM Turbo Oil Gasket
- OEM Turbo PCV Flange Gasket
- OEM Engine Oil Gasket
- OEM Vacuum Line Crimp Clamp
- OEM PCV Crimp Clamp
- OEM Crush washers for Turbo Oil and Coolant Connections (10x)
- Stealthy OEM Appearance - APR's S3 K04 Turbocharger Conversion System is constructed from OEM parts and appears OEM. It's easy to install and 100% reversable. Every OEM part is fully Plug and Play:
- Intercooler (Upgrade Recommended)
- Exhaust (Upgrade Recommended)
- Intake (Upgrade Recommended)
- Diverter Valve
- Positive Crankcase Ventilation Lines
- EVAP Lines
- Coolant Lines
- Oil Lines
- Turbo Support Brace
Oil, Coolant and Lubrication:
An oil change service is required at the time of install in order to properly break in the new turbocharger. Complete Liqui Moly oil change kits are available.