In stock and ready to ship!
NGP presents the APR 3.0 TFSI Supercharger Drive and Crank Pulley Upgrades.
APR’s Supercharger Drive and Crank Pulley Upgrades dramatically increase horsepower and torque by increasing the rotational speed of the factory supercharger. APR’s Stage II Pulley ECU Upgrade makes the necessary engine management adjustments to handle the increased supercharger speeds, and in turn allows the engine to create more power.
The pulleys are sold separately, allowing for multiple levels of performance, each of which builds upon the other. Finally, when combined with APR’s Ultracharger Throttle Body Upgrade in a dual pulley setup, the system is alleviated of power robbing inlet restrictions, allowing the engine to achieve exciting new levels of performance!
APR Supercharger Drive Pulley Upgrade:
APR’s Supercharger Drive Pulley Upgrade decreases the diameter of the factory pulley from ~63.25mm to 57.75mm, which in turn spins the supercharger ~9.5% faster. This results in a healthy bump in horsepower and torque across the entire RPM range with the supercharger operating at a higher rate of speed. The pulley is CNC machined from billet stainless steel, e-coated black for an OEM appearance and is press fitted to the factory supercharger unit.
Supercharger Belt - For use with an APR Drive Pulley & an OEM Crank Pulley PT# RS100001 is sold separately.
APR Supercharger Crank Pulley Upgrade:
APR’s Supercharger Crank Pulley Upgrade increases the diameter of the factory pulley from ~162mm to ~187mm, which in turn spins the supercharger ~15.4% faster. This results in a larger bump in horsepower and torque across the entire RPM range, as the supercharger is spinning at an even higher rate of speed. The pulley retains the factory harmonically balanced crank pulley and bolts on top of the existing unit. It is CNC machined from light weight billet aluminum with weight saving pockets throughout. It has ananodized black finish and includes new crank pulley bolts.
Supercharger Belt - For use with an OEM Drive Pulley & an APR Crank Pulley RS100003 is sold separately.
APR Stage II ECU Upgrade:
APR’s Stage II ECU Upgrade is designed for use with each pulley upgrade and only needs to be purchased once. The upgrade builds upon the APR Stage I ECU Upgrade, reconfiguring the engine management system to work in conjunction with the higher boost pressure and airflow levels achieved by spinning the supercharger faster. The Stage I ECU Upgrade is required to purchase the Stage II ECU Upgrade. See Info Here
APR Supercharger Dual Pulley Upgrades:
Upgrading both the supercharger drive and crank pulleys results in the factory supercharger spinning ~26.4% faster than stock. This speed was chosen after extensive engine and chassis dyno testing with various pulley sizes and supercharger speeds. The result is an even higher horsepower and torque gain across the entire RPM range. However, at the airflow levels achieved with a dual pulley setup, maximum power is severely restricted by the factory throttle body unit.
Supercharger Belt - For use with an APR Drive Pulley & an APR Crank Pulley RS100002 is sold separately.
Dual Pulley Upgrade Note:
The APR Ultracharger Throttle Body Upgrade is necessary to take full advantage of the dual pulley configuration, and is available in platform specific variations for the B8/B8.5 A4/A4/S4/S5, Q5/SQ5 and C7 A6/A7. See info Here
Applications:
Audi S4 - (B8 & B8.5 Typ 8K) 3.0 TFSI All Transmissions
Audi S5 - (B8 & B8.5 Typ 8T) 3.0 TFSI All Transmissions
Tech Notes: This product is designed for use with APR's S Tronic TCU Upgrade, NGK BKR9EIX plugs gapped @ .024” +/- .002” torqued to 30Nm and a new supercharger belt.
The APR Coolant Performance System is highly recommended and required with the dual pulley setup. IAT’s must be below 75c to achieve the advertised power figures. A high flow intake system is highly recommended and is required to meet the advertised power figures on the A4/A5/S4/S5/Q5/SQ5.
For the best results, APR recommends removing the intake snow screen.
APR Stage 2 Calibration Results:
Audi S4 / S5 (B8) Stage Fuel Grade Power Torque Gain Over Stock Stage 2 Single Pulley 91 AKI / 95 RON 437 HP 386 FTLBS +94 HP +68 FTLBS Stage 2 Single Pulley 93 AKI / 98 RON 455 HP 395 FTLBS +112 HP +82 FTLBS Stage 2 Single Pulley 100 AKI / 104 RON 473 HP 404 FTLBS +130 HP +95 FTLBS Stage 2 Single Pulley 104 AKI / 108 RON 480 HP 409 FTLBS +138 HP +100 FTLBS Stage 2 Dual Pulley 91 AKI / 95 RON 445 HP 412 FTLBS +100 HP +80 FTLBS Stage 2 Dual Pulley 93 AKI / 98 RON 465 HP 428 FTLBS +120 HP +97 FTLBS Stage 2 Dual Pulley 100 AKI / 104 RON 513 HP 459 FTLBS +168 HP +126 FTLBS Stage 2 Dual Pulley 104 AKI / 108 RON 527 HP 469 FTLBS +182 HP +136 FTLBS Audi S4 / S5 (B8.5) Stage Fuel Grade Power Torque Gain Over Stock Stage 2 Single Pulley 91 AKI / 95 RON 448 HP 381 FTLBS +138 HP +101 FTLBS Stage 2 Single Pulley 93 AKI / 98 RON 458 HP 387 FTLBS +148 HP +108 FTLBS Stage 2 Single Pulley 100 AKI / 104 RON 470 HP 398 FTLBS +160 HP +117 FTLBS Stage 2 Single Pulley 104 AKI / 108 RON 481 HP 406 FTLBS +171 HP +125 FTLBS Stage 2 Dual Pulley 91 AKI / 95 RON 445 HP 415 FTLBS +134 HP +98 FTLBS Stage 2 Dual Pulley 93 AKI / 98 RON 468 HP 432 FTLBS +157 HP +115 FTLBS Stage 2 Dual Pulley 100 AKI / 104 RON 513 HP 461 FTLBS +202 HP +147 FTLBS Stage 2 Dual Pulley 104 AKI / 108 RON 527 HP 471 FTLBS +215 HP +157 FTLBS