Get the most out of your vehicle today with Unitronic Performance ECU software for the Audi C7, C7.5 S6, S7 or Audi A8 equipped with the 4.0T V8
Choose your software stage:
Stage 1 - 524 HP / 534 LB-FT (+104 HP / +128 LB-FT)
Performance Software Precisely Engineered for a completely stock car.
- Requires 91 Octane Fuel
Stage 1+ - 529 HP / 557 LB-FT (+109 HP / +151 LB-TQ)
Performance Software Precisely Engineered for a completely stock car.
- Requires 93 Octane Fuel
Stage 2 - 538 HP / 585 LB-FT(+118 HP / +179 LB-FT)
Performance Software Precisely Engineered for use with an upgraded exhaust system.
- Requires upgraded high flow downpipes
- Requires 93 octane fuel
- Upgraded air intake recommended
- Upgraded exhaust system recommended
Stage 2+ - 665 HP / 634 LB-FT(+245 HP / +228 LB-FT)
Performance Software Precisely Engineered for use with upgraded downpipes and RS7 Turbochargers.
- Requires upgraded high flow downpipes
- Requires 93 octane fuel
- Requires RS7 turbochargers
- Upgraded intake system recommended
- Upgraded exhaust system recommended
Features Included With All Stages
- Engineered with Strict Industry Standards
- Extensively Tested Under Various Driving Conditions
- Factory Safety Limiters Retained
- Optimized Responsiveness and Drivability
- Optimized Smoothness and Driving Comfort
- Power Delivery Perfectly Optimized Throughout the Power Band
- Improved Fuel Efficiency
- Ignition Timing Precisely Calibrated for Higher Octane Fuel
Fitment/Applications
- 2013-2018 Audi C7, C7.5 S6 4.0T
- 2012-2018 Audi C7, C7.5 S7 4.0T
- 2010-2017 Audi A8 4.0T
Installation
UniConnect+ Software Interface
UniCONNECT+ gives you the freedom to effortlessly install your Unitronic Performance ECU and DSG Software from the comfort of your own home or garage.*
Unitronic (and NGP) recommends the use of battery chargers to ensure, uninterrupted, trouble-free, flashing at home! If you do not use a good battery charger while programming your ECU, you run the risk of damaging it should your battery voltage drop below recommended levels.
Includes Unitronic carrying case.
Change Software Maps
Quickly and Easily re-flash your ECU with Performance Software maps designed and specifically calibrated to suite the hardware and fuel modifications or fuel grade used.
Data Logging
Gathering high resolution data is made easy with Unitronic’s pre-configured channel loadouts for fast and effortless troubleshooting and data logging.**
Simple back to factory restoration
UniCONNECT+ makes it painless to revert your ECU back to it’s stock calibration within minutes.*
Advanced Settings
Enable optional advanced settings such as Launch Control or No Lift Shifting within minutes. Enable Gear display in MFG for DSG Software owners.*
Technical Specifications
Minimum System Requirements:
- Operating System: Microsoft Windows 10
- Internet Explorer 11
- Screen Resolution: 1024x768
- Processor: 1.5 GHz or higher
- Memory (RAM): 4GB or more
For optimal application performance:
- Operating System: Microsoft Windows 10 or higher
- Internet Explorer 11 or newer
- Screen Resolution: 1024x768
- Processor: 2.0 GHz or higher
- Memory (RAM): 8GB or more
Internet access is required.
Do you prefer professional installation?
If you are local to one of our shops and would prefer to have us install this software, please contact one of our shops to set up an appointment.
Please note that this software may not be available for all ECU IDs.
The Unitronic+ Programmer is not returnable under most circumstances. The only exception for this policy is if you were to receive your cable and Unitronic does not have a tune for your vehicle.