034Motorsport MK7/7.5 Volkswagen Golf, Sportwagen, Alltrack, & 8V Audi A3 EA888.3 1.8T Dynamic+ Tuning ECU & DQ250 TCU Tuning Bundle
034Motorsport Dynamic+ Performance Tuning Software for the MK7/7.5 Volkswagen Golf, Sportwagen, Alltrack, & 8V Audi A3 equipped with the EA888 Gen 3 1.8T inline-four engine is designed to transform the driving experience of your vehicle! Flashed directly through your vehicle’s OBD-II port, 034Motorsport’s proprietary calibrations for the ECU safely and effectively increase the power output of the turbocharged inline-four in a refined manner. The result is a significant improvement in acceleration and throttle response without sacrificing driveability or reliability.
034Motorsport MK7/7.5 Volkswagen Golf, Sportwagen, Alltrack, & 8V Audi A3 EA888.3 Dynamic+ Performance Software was developed entirely in-house on 034Motorsport's Development Golf Alltrack. The calibrations were then refined on multiple enthusiast-owned beta tester cars around the world.
034Motorsport Engineers develop special inhouse tools that allow us to access the firmware and maps inside the factory ECU, this level of engineering is required to prevent work-arounds and bandaids that many aftermarket companies resort to. 034Motorsport engineers and optimizes the ECU calibrations just like Volkswagen engineers would, but accessing the source of how the ECU controls the engine and making changes at the base level.
This is the ONLY way 034Motorsport can ensure our calibrations meet our high standards for ultimate power with smooth drivability, perfect function, reliability and added functions and features even beyond what the factory programming can provide.
NOTE: The E85 calibration is not a flex-fuel style tune. The tune will work with E85 directly from the pump, both summer and winter blends (ethanol content can vary from E60-E85). This tune requires only E85 be pumped into the fuel tank. Gasoline blends and race fuel mixtures should not be used, and engine damage could occur if the incorrect fuel or octane is used. We strongly recommend an ethanol content gauge be used so that you can monitor the actual ethanol content at the pump you are using.
When switching fuels, it takes about 20-30 minutes of normal driving for the new tank of fuel to fully circulate through the system when filled at E. Please minimize load (don’t floor it!) until you have driven the car for at least 30 minutes. Ethanol content analyzers installed close to the fuel rail will also help you see when the ethanol has fully run through the system.
034SPI MOBILE FLASHING PHONE APP
All Dynamic+ tunes can now be flashed anywhere you please with the 034SPI (Smartphone Interface) Mobile Flashing application!
Designed for use on iOS and Android Devices as well as Apple Silicon-equipped laptops (M1, M2, M3), 034SPI allows you to easily flash your car, change fuel maps, configure live data displays, record and submit data logs to 034Motorsport's Tuning Support team, and utilize diagnostic support tools such as DTC/CEL code read/clear and more! Available now for use with any Dynamic+ ECU or TCU tune and the latest R4 Dynamic+ End User Flashing Dongle (May 2023 & Newer)! Download via the Apple App Store or Google Play Store Today!
To see full app features and access helpful How-To YouTube videos: Click or Tap Here
Detailed Flashing Features:
- Complete Any ECU Or TCU Tune Flash
- Quickly Flash Different Fuel Octane Or Transmission Files
- Flash ECU/TCU Using Mobile Device's Internet Connection
- Enhanced Flashing Protocol Protections For Increased Flashing Stability
- User-Configurable Live Data Displays
- Multiple Data Display Views
- Dozens Of Defined Variables Available
- High-Speed Datalogging Of Pre-Defined Variables
- Easy Upload Of Logs To 034Motorsport Server
- Datalog Analysis Services Available Free Of Charge
- Read & Clear DTCs On ECU & TCU
- View Emissions Monitor Statuses
- Perform Adaptations/Recalibrations*
*Available for limited platforms, coverage expanding regularly
034MOTORSPORT MK7/7.5 VOLKSWAGEN GOLF, SPORTWAGEN, ALLTRACK, & 8V AUDI A3 1.8T PERFORMANCE SOFTWARE COMPARISON:
| STAGE | FUEL | MAX HP | MAX TQ | MAX HP GAIN | MAX TQ GAIN | REV LIMITER* | SPEED LIMITER |
|---|---|---|---|---|---|---|---|
| Stock (IS12) | 87 Oct (AKI) | 179 HP | 211 TQ | NA | NA | 6,500 RPM | 124 MPH |
| Stage 1 (IS12) | 87 Oct (AKI) | 214 HP | 272 TQ | 45 HP @ 4,600 RPM | 67 TQ @ 3,200 RPM | 6,500 RPM | ∞ |
| Stage 1 (IS12) | 91 Oct (AKI) | 230 HP | 291 TQ | 60 HP @ 4,600 RPM | 89 TQ @ 3,400 RPM | 6,500 RPM | ∞ |
| Stage 1 (IS12) | 93 Oct (AKI) | 238 HP | 301 TQ | 68 HP @ 4,800 RPM | 98 TQ @ 3,300 RPM | 6,500 RPM | ∞ |
| Stage 1 (IS12) | E85 (AKI) | 261 HP | 322 TQ | 91 HP @ 5,000 RPM | 119 TQ @ 3,300 RPM | 6,500 RPM | ∞ |
***All octane ratings are in US standard AKI (RON+MON). Some ROW countries such as the UK use a RON octane rating that differs from US Octane ratings. Please email tuning@034motorsport.com to ensure you are running the correct octane file for your area. Running the incorrect octane file for your fuel can result in irreversible damage.
DYNAMIC+ ECU FEATURES:
THERMAL MANAGEMENT SAFETY STRATEGIES:
With increased power, comes increased heat. With increased heat, comes the need for additional management. For charge air temperature, 034Motorsport has implemented key safety features to keep your engine running optimally and safely in virtually any condition - just like the OEM calibration. Substantial effort was spent on balancing the trade off of charge temp for power, and improving the compressor efficiency so that it doesn't generate too much charge temp.
Charge Air Temp: When the charge temp exceeds 70*C there is a reduction in power output. When the charge temp exceeds 80*C there is a more significant reduction in power output. This charge temp limitation is there to prevent knock events, which can severely damage a motor. With these safety measures in place, you can confidently drive your car, from the top of Pikes Peak to Death Valley, knowing the factory ECU has optimal performance and safety covered.
Oil Temperature: When oil temperatures exceed 130*C there is a reduction in power output. When the oil temperature exceeds 135*C there is a more significant redution in power output. This oil temperature limitation is there to limit oil temperatures from climbing to unsafe levels which can damage a motor. With these safety measures in place, you can confidently drive your car under high sustained loads, such as track driving or towing, knowing the factory ECU has optimal performance and safety covered.
FUEL SYSTEM OPTIMIZATION:
While E85 provides substantial increases in power, it requires about 30% more fuel than standard pump gasoline per ignition cycle. Utilizing a variety of fuel stratified injection strategies, 034Motorsport calibrators have further optimized the factory fueling system to be able to adequately support full E85 on factory hardware for Stage 1.
ADVANCED BOOST CONTROL STRATEGIES
From sea level to 6,000+ ft elevation in the Rocky Mountains, to below freezing and over 100° Fahrenheit, Dynamic+ employs advanced boost control and safety strategies to ensure that your IS12 equipped EA888.3 1.8T is consistently reliable, regardless of the conditions! These advanced boost control calibration strategies ensure that your turbocharger stays within its safe operating range and generating consistent boost levels, while preventing premature failure, especially when your vehicle is in less than ideal environments.
FREE REVVING IN NEUTRAL AND PARK
The rev-limiter is now removed while in Neutral and Park. Impress friends and annoy those around you with limitless ease!
LAUNCH CONTROL OPTIMIZATIONS FOR DQ250 EQUIPPED VEHICLES:
034Motorsport’s skilled Calibration team has properly engineered and implemented an advanced motorsport derived strategy for building boost during launch control. Dynamic+ Calibrations allow for launch control to build boost more quickly and efficiently as opposed to the factory calibration without damaging the turbocharger.
REV HANG REMOVED
034Motorsport Dynamic+ Tuning removes rev hang from manual transmission equipped vehicles for a smoother driving and shifting experience!
DQ250 6-SPEED DSG TCU TUNE FEATURES:
Flashed directly through your vehicle’s OBD-II port, 034Motorsport’s proprietary calibrations for the DQ250 TCU safely and effectively optimize its operation for Stage 1 Dynamic+ Performance ECU Software. The DQ250 6-Speed DSG transmission is found in the MK7/7.5 Volkswagen Golf, Sportwagen, Alltrack, & 8V Audi A3 1.8T. 034Motorsport Performance DSG Software also increases the shift speed and optimizes the shift points in Drive and Sport modes for better performance and driveability. The result is a noticeable improvement in acceleration, without any sacrifice in comfort or reliability.
Features:
- Shift Speeds Increased
- Optimized Shift Points in Drive & Sport Mode
- Increased DSG Clutch Clamping Force
- Improved Responsiveness
- No Kickdown Downshifts in Manual Mode
- Launch Control Enabled on All Models
- Gear Display Indicator on MFD Enabled in All Driving Modes
034MOTORSPORT EA888 GEN 3 1.8T STAGE DESCRIPTIONS:
STAGE 1
034Motorsport Stage 1 Performance Software for the EA888 Gen 3 1.8T engine running pump gas or ethanol is engineered to safely increase the horsepower and torque with no additional hardware required.
In addition to power improvements, 034Motorsport's engineers spent a significant amount of time refining the throttle mapping in order to provide improved throttle response and allow for more precise throttle modulation and further control of the vehicle when driving on track. Due to the limitations of the stock turbocharger on the EA888 Gen 3 1.8T, the rev limiter was not adjusted.
034Motorsport EA888 Gen 3 1.8T Performance Software is flashed via the factory OBD-II port, and does not require any physical modification of the factory ECU. Dynamic+ ECU Software is compatible with DQ250 DSG, 6MT, and Aison AQ250 transmission equipped vehicles. Stage 1 is available in 87 Octane, 91 Octane, 93 Octane, and E85. ALL FILES ARE US (MON+RON) RATING, ROW OCTANE RATINGS MAY DIFFER.
STAGE 2
Stage 2 Calibrations are currently in development!
IS20 & IS38 TUNING
IS20 & IS38 Calibrations are currently in development!
REAL-WORLD PERFORMANCE DATA
034Motorsport saw improvements of over 2-seconds quicker in the quarter mile, trapping over 14 MPH quicker over the stock quarter mile. Similarly, 034Motorsport also observed nearly a 3-second improvement in the 0-60 MPH time! These times were collected by 034Motorsport in our development Stage 1 Golf Alltrack with stock hardware, wheels & tires, and no weight reduction.
Stock (87 AKI):
- Quarter Mile: 15.67 @ 86.11 MPH (-284 FT DA)
- 0-60 MPH: 5.72s
- Dragy: Click or Tap Here
Stage 1 (87 AKI):
- Quarter Mile: 14.02 @ 95.03 MPH (-1806 FT DA)
- 0-60 MPH: 5.72s
- Dragy: Click or Tap Here
Stage 1 (91 AKI):
- Quarter Mile: 13.89 @ 95.88 MPH (-43 FT DA)
- 0-60 MPH: 5.39s
- Dragy: Click or Tap Here
Stage 1 (93 AKI):
- Quarter Mile: 13.70 @ 97.75 MPH (-272 FT DA)
- 0-60 MPH: 5.18s
- Dragy: Click or Tap Here
Stage 1 (E85):
- Quarter Mile: 13.35 @ 100.59 MPH (-77 FT DA)
- 0-60 MPH: 4.78s
- Dragy: Click or Tap Here
034MOTORSPORT DYNAMIC+ END USER FLASHING KIT R4:
034Motorsport's Dynamic+ End User Flashing Kit R4 allows customers to install their 034Motorsport Dynamic+ Performance Software themselves. In addition, End User Flashing allows Dynamic+ Performance Software customers to receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software for their vehicle.
Available at no additional charge is the 034SPI Mobile App, which allows you to easily flash your car, change fuel maps, configure live data displays, record and submit data logs to 034Motorsport's Tuning Support team, and utilize diagnostic support tools such as DTC/CEL code read/clear and more all from your mobile device! Available via the Apple App Store or Google Play Store.
Requirements for Windows-Based End User Flashing:
- Windows 10/11 Laptop with Available USB Port
- Power Supply for Laptop
- Secure Wired (Or Very Stable WiFi) High-Speed Internet Connection
- Battery Charger, 20AMP minimum (CTEK Brand recommended)
- Available Electrical Outlets
Requirements for 034SPI App End User Flashing:
- Dynamic+ End User Flashing Kit R4
- Android Phone or Tablet Devices
- Apple Silicon-Based Mac Laptops (M1, M2, M3)
- Apple iPhone or iPad Devices
- Power Supply for Device (If Low Battery or Poor Health)
- Secure and Stable WiFi or LTE High-Speed Internet Connection
- Battery Charger, 20AMP minimum (CTEK Brand recommended for first flash)
- Available Electrical Outlets
034Motorsport End User Flashing Kit R4 Contents:
- 034Motorsport OBD-II Adapter
USB-C to USB-A Cable
USB-C to USB-C Cable
Carrying Case
User Credentials (Provided Via Email)
EMISSIONS DISCLAIMER
- This product is sold for racing use as well as use on vehicles not registered for on highway use.
- By purchasing this product, you understand that this product is sold for racing use as well as used on vehicles not registered for on highway use, and that it is not legal for use on highway or street vehicles.
WELCOME TO DYNAMIC+ TUNING!
034Motorsport's Dynamic+ Performance Software provides reliable horsepower and torque increases through driver-centric calibrations that elevate driving enjoyment and precision. The Dynamic+ Tuning Philosophy emphasizes safety and reliability, with the goal of optimizing power delivery without compromising the longevity of the engine and related components.
Included with the Purchase of Any Dynamic+ Tune:
30 Day Money Back Guarantee
034Motorsport offers a 30 Day Money Back Guarantee on Dynamic+ ECU & TCU Tuning Software & Flashing Cable to ensure your complete satisfaction with our products and tuning. If you are not 100% satisfied with the Dynamic+ Transformation on your Volkswagen or Audi, please contact us within 30 calendar days of the initial flash, and we will process a full refund to the original payment method.
Easy Map Switching
When purchasing any 034Motorsport staged tune, all octanes for that specific tune are included, as is the vehicle’s stock file.
Switching files is easy when using the Dynamic+ Flashing Portal on your Windows 10/11 computer, with mobile support available now!
World Class Tuning Support
034Motorsport’s World Class Tuning Support Team is available 5 days a week standing by to answer and assist with any questions you may have regarding your Dynamic+ Tune, recommended hardware upgrades, or help to diagnose any issues you may have with your vehicle while flashing, or after you’ve flashed.
Advanced Technological Support
The 034Motorsport Dynamic+ Tuning Suite also offers enhanced to users to allow users to datalog their Volkswagen or Audi to ensure that it is running properly. This logger is available to be used with our Tuning Support Team and is not designed to be reviewed by the end user.
034Motorsport Dynamic+ Flashing Portal:
- Click Here to Download for Windows 10/11 PC
- Click Here to Download For Android
- Click Here to Download For iPhone/iPad/iMac
FITMENT/APPLICATIONS:
- Audi A3 2015-2016 8V 1.8 TFSI
- VW Golf 2015-2019 Mk7/Mk7.5 1.8T Gen3
- VW Golf SportWagen 2015-2019 Mk7/Mk7.5 1.8T Gen3
- VW Golf Alltrack 2017-2019 Mk7/Mk7.5 1.8T Gen3