APR is pleased to present the ultimate engine control unit (ECU) upgrade for the 2.0T EA888 Gen 3 engine!
APR’s ECU Upgrades are the best dollar-per-horsepower modification one can make to the 2.0T engine. The upgrades dramatically increase horsepower and torque, making for an exceptionally quicker and more exciting vehicle. This is made possible through APR’s optimization of the factory engine management system to take full advantage of the engine’s capabilities, without needing any end user adjustment. The software loads to the factory ECU through the OBD-II port, resulting in a clean and headache-free install. Furthermore, for those looking for tuning with a limited powertrain warranty, APR Plus has you covered!
APR Stage I ECU Upgrade
The APR Stage I ECU Upgrade is the first step towards making more power! This simple upgrade requires no engine hardware modifications, and produces 310-318 HP with 361-371 FT-LBS of torque depending on fuel grade. Gains as high as 64-70 HP and 80-88 FT-LBS of torque are available throughout the power band, depending on fuel grade and factory output, making the vehicle exceptionally quicker in all scenarios.
APR Plus ECU Upgrade with a Limited Powertrain Warranty
The APR Plus ECU Upgrade is the first step towards making more power, and it includes our limited powertrain warranty. This simple upgrade requires no engine hardware modifications, and produces 310 HP with 361 FT-LBS of torque. Gains as high as 64 HP and 80 FT-LBS of torque are available throughout the power band, making the vehicle exceptionally quicker in all scenarios.
The APR Plus ECU Upgrade matches the performance of our Stage 1 ECU Upgrade (91 octane version). To get even more power, you can add any of our other Stage 1 compatible products and still be covered under the APR Plus warranty! To learn more about APR Plus, please visit the APR Plus website.
If you're not interested in the APR Plus limited powertrain warranty, and want even more power, check out our other Stages.
Acceleration Enhancements
Beyond power and torque enhancements, APR’s Calibration Engineers were able to increase the acceleration rate of the vehicle through other calibrations changes. Ignition delay is reduced resulting in a more responsive pedal without altering overall throttle sensitivity. Furthermore, drivability was greatly improved by reducing the throttle lag commonly noticed at slow speeds and while reapplying throttle after decelerating.
Increased Fuel Economy
APR’s Calibration Engineers paid close attention to several parameters directly related to fuel economy, especially while cruising at highway speeds. Depending on driving style and fuel quality, better miles per gallon may be achieved!
Clutch Protection
APR’s standard Stage I ECU Upgrade offers a large increase in low-end torque, which may overpower the factory clutch. While APR did not experience clutch slip at the advertised torque levels and even higher, others may due to clutch health and driving style. APR recommends upgrading slipping clutches, but has also created special software designed to deliver the same peak horsepower with a cap on low end torque to reduce or eliminate slipping. These specific files are available with various torque caps set lower than the standard Stage I ECU Upgrade.
Speed Limiter
APR’s ECU upgrade increases the vehicle's top speed limiter for blistering sprints around the track or across the Autobahn without the speed limiter shutting down the fun!
Left Foot Braking / Brake Boosting
APR's Left Foot Braking feature allows more control over the vehicle’s throttle. The factory equipped vehicle's throttle input is disabled while pressing the accelerator and brake at the same time. Left Foot Braking, a common motorsport driving technique, allows the driver complete control over the vehicle’s throttle and braking system, which may give the vehicle the edge it needs at the track. As is with all features APR adds to the ECU, this feature may be removed upon request.
Torque Management
Torque management plays a big role in how the vehicle feels and preforms, especially during moments of low gear, rapid acceleration. Typically front wheel drive vehicles suffer from excessive wheel spin during these moments due to the massive amount of torque on tap from the ECU upgrade. APR’s ECU Upgrade uses advanced torque management routines to minimize wheel spin and maximize forward acceleration so the driver can focus on enjoying the additional torque and power on tap. We call it Performance Without Compromise!
Stock - 91 AKI As Reported by Porsche |
Stock - 93 AKI As Measured by APR |
APR Plus 91 AKI |
91 AKI 95 RON |
93 AKI 98 RON |
|
---|---|---|---|---|---|
- Max increases are based on APR's actual measured stock values and not those reported by Porsche. | RON = ROW Fuel Grades | AKI = North American (RON+MON)/2 Fuel Grades. | |||||
- Reported wheel figures measured on APR's in house Mustang Dynamometer with a US Spec Macan 2.0T, PDK, Quattro, using SAEJ1349 correction and an average of multiple runs. Crank figures estimated based on the measured wheel figures. Results will vary depending upon environmental conditions, vehicle, transmission, vehicle health, operating conditions, temperatures, fuel grade, dyno type, dyno setup, and other modifications. | |||||
Rev Limit | 6,800 RPM | 6,800 RPM | 7,100 RPM | 7,100 RPM | 7,100 RPM |
Speed Limit | Limited | Limited | Unlimited | Unlimited | Unlimited |
Peak Horsepower (HP) | 249 HP | 266 HP | 310 HP | 310 HP | 318 HP |
Peak Torque (FT-LBS) | 273 TQ | 298 TQ | 361 TQ | 361 TQ | 371 TQ |
Max Horsepower Increase over Stock* | +64 HP | +64 HP | +70 HP | ||
Max FT-LBS of Torque Increase over Stock* | +80 TQ | +80 TQ | +88 TQ |