Mk2 / Early Mk3 VR6 Upper Front Strut Bearing Conversion kit
Priced as a complete kit, OEM type quality strut bearing and seperate rubber mount, with OEM VW nut. This is the kit you need to convert your Mk2, Corrado G60 or pre 6.1996 Mk3 to a VR6 style strut bearing. Please note, this kit will work as-is with a coilover suspension, but you will need to purchase a set of VR6 upper spring hats if using these with your standard large-top springs. These are listed sperately online at NGP. Email firstname.lastname@example.org with any questions!
Mk2 / Early Mk3 VR6 Upper Front Strut Bearing Conversion kit will fit the follow vehicles:
- -Golf & GTI models from 1985 to 1992, including 16v
- Jetta & GLI models from 1985 to 1992, including 16v
- Corrado G60 models from 1989 to 1992
- Golf / Jetta 8v models from 1993 to 6.1996
The upper front strut bearings are an integral part of your suspension system, so keeping them fresh is extremely important, especially in a performance driving situation. Worn strut bearings can increase noise and vague feeling at the front end, in addition to poor or changing alignment specs. Any time you upgrade to a new suspension part, or every 30k miles or so, whatever comes first, we recommend new strut bearing / mounts.
Spring Hat Information
When using this kit to convert to the newer bushing/bearing design, you must also change the spring hat to properly fit the smaller bushings to your large top springs. You can select to add an updated spring hat to your order in the options above. Please look at the comparison images for more information.
Priced as a pair.