H&R Race Springs - Mk4 1.8t / VR6 / TDI / 2.0
For all Mk4 Golf / Jetta Vehicles. if you are looking to make your Mk4 a true "dual-purpose machine" with lots of Autocross and track days, these H+R Race springs are what you need. Ideal for ultra-aggressive street and track performance when used with a high=quality sport shock absorber, without the cost of threaded coil over suspension.
Front - 2"
Rear - 1.75"
For the discerning enthusiast that wants the ultimate in performance and an aggressive look, H&R Race Springs are the perfect solution. H&R Race Springs should be matched with high-quality, sport-tuned shock absorbers.
Please note! Lowering Beyond 1.6" will require upgrading to adjustable sway bar endlinks, or an aftermarket front sway bar.
Why new strut bearings?
NGP Racing offers (and recommends) replacement strut bearings for all VW and Audi vehicles that use them. Many people may not be familiar with what a strut bearing is or why they need to be replaced, so we've come up with this brief tutorial on what they are, and why it is wise to replace them when installing your new suspension...
A strut bearing is used at the top of all front (not rear) strut type suspensions. The strut, as an integral part of the front suspension assembly, must be able to turn freely as you turn the wheel left to right. The strut bearing is what allows this to happen. The strut bearing is typically comprised of two parts, the bearing and the bushing. On more modern cars these are two separate pieces, on older cars they are joined together. Being at the front of the car, these parts take a beating on every bump, dip and pot-hole that you hit. The bearings can become damaged and will bind / pop and make noise, as well as allow for play at the top of the strut. The rubber bushing will gradually become compressed and will no longer properly cushion the assembly in the strut tower. All of this adds up to a rougher ride, poor handling and increased tire wear due to changing alignment, and overall poor performance.
Installing new strut bearings will allow the car to be aligned properly, and will ensure you get the handling you desire with your new sport suspension. They are sold by the pair, and they require no extra labor when installing them with a new suspension.