H&R Coil Over Suspension - Mk3 8v / VR6 - Ultra-Low 1
For all Mk3 Golf / Jetta Vehicles.
Front - 2.7" to 4"
Rear - 2.7" to 4"
Engineered for street and occasional track use, H&R Coil-Overs feature a fully-threaded shock body (not an imitation sleeve-over) that allows you to precisely dial in height adjustment to achieve optimum weight transfer, or simply get the aggressive look you've been looking for. Featuring H&R's exclusive dynamic damper technology, each shock is engineered to work in harmony with a progressive-rate spring, together creating a finely-tuned suspension system.
Please note: Image is for descriptive purpose only, and is not the exact model. Some Vehicles may need wheel spacers when running coilovers, depending on wheel and offset.
Why new strut bearings?
NGP Racing offers (and recommends) replacement strut bearings for all VW and Audi vehicles that use them. Many people may not be familiar with what a strut bearing is or why they need to be replaced, so we've come up with this brief tutorial on what they are, and why it is wise to replace them when installing your new suspension...
A strut bearing is used at the top of all front (not rear) strut type suspensions. The strut, as an integral part of the front suspension assembly, must be able to turn freely as you turn the wheel left to right. The strut bearing is what allows this to happen. The strut bearing is typically comprised of two parts, the bearing and the bushing. On more modern cars these are two separate pieces, on older cars they are joined together. Being at the front of the car, these parts take a beating on every bump, dip and pot-hole that you hit. The bearings can become damaged and will bind / pop and make noise, as well as allow for play at the top of the strut. The rubber bushing will gradually become compressed and will no longer properly cushion the assembly in the strut tower. All of this adds up to a rougher ride, poor handling and increased tire wear due to changing alignment, and overall poor performance.
Installing new strut bearings will allow the car to be aligned properly, and will ensure you get the handling you desire with your new sport suspension. They are sold by the pair, and they require no extra labor when installing them with a new suspension.