{"title":"Drivetrain Mounts","description":"","products":[{"product_id":"bfi-torque-arm-insert-stage-2-vw-mk5-mk6-b6-passat-cc-audi-a3-mk2-tt-2009","title":"BFI - Torque Arm Insert - Stage 2 - VW Mk5, Mk6, B6 Passat, CC, Audi A3, Mk2 TT 2009+","description":"\u003cp\u003eUnder hard acceleration, the pendulum mount (commonly referred to as the \"dogbone\" or by VW as the \"torque arm\") acts to limit rotational movement of the engine - The factory bushings do a satisfactory job, while limiting vibrations, but only during sedate driving conditions. When pushed hard those bushings flex creating a vauge feeling in the engine and gearbox, and adding to the dreaded \"wheel hop\" phenomenon.\u003c\/p\u003e\r\n\u003cp\u003eThe pendulum mount torque arm insert fills the voids in the stock rubber bushing, making what was a soft rubber bushing with voids into what behaves like a solid mount. With the insert installed, you will notice that throttle response will feel better and your shifts will feel more crisp and defined, especially on manual transmission cars.\u003c\/p\u003e\r\n\u003cp\u003eThese mounts are made to be the stiffest on the market made from the highest quality (90a) durometer polyurethane. Each insert is pressure injection molded to insure a consistent hardness throughout the mount for long life even under hard driving condtions.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e \u003cstrong\u003eAny aftermarket motor mount \/ trans mount \/ dogbone mount that is firmer than the OEM mount can increase noise and\/or vibration to some level above the stock mount.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePlease Note: Care must be taken when installing this insert as the arms can be torn if installed incorrectly. Be sure to use silicone paste or lubricant to properly slide it into place. Do not attempt to insert \"dry.\u003c\/strong\u003e\u003cem\u003e\u003cstrong\u003e\"\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Black Forest Industries","offers":[{"title":"Default Title","offer_id":44897558462758,"sku":"EBFI78-Q5-022","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/product_detailed_image_5022_5002.jpg?v=1682125780"},{"product_id":"bfi-torque-arm-insert-stage-1-vw-mk5-mk6-b6-passat-cc-a3-mk2-tt-2009","title":"BFI - Torque Arm Insert - Stage 1 - VW Mk5, Mk6, B6 Passat, CC, A3, Mk2 TT 2009+","description":"\u003cp\u003eUnder hard acceleration, the pendulum mount (commonly referred to as the \"dogbone\" or by VW as the \"torque arm\") acts to limit rotational movement of the engine - The factory bushings do a satisfactory job, while limiting vibrations, but only during sedate driving conditions. When pushed hard those bushings flex creating a vauge feeling in the engine and gearbox, and adding to the dreaded \"wheel hop\" phenomenon.\u003c\/p\u003e\r\n\u003cp\u003eThe pendulum mount torque arm insert fills the voids in the stock rubber bushing, making what was a soft rubber bushing with voids into what behaves like a solid mount. With the insert installed, you will notice that throttle response will feel better and your shifts will feel more crisp and defined, especially on manual transmission cars.\u003c\/p\u003e\r\n\u003cp\u003eThese mounts are made to be the stiffest on the market made from the highest quality (90a) durometer polyurethane. Each insert is pressure injection molded to insure a consistent hardness throughout the mount for long life even under hard driving condtions.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePlease Note: Care must be taken when installing this insert as the arms can be torn if installed incorrectly. Be sure to use silicone paste or lubricant to properly slide it into place. Do not attempt to insert \"dry.\"\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e \u003cstrong\u003eAny aftermarket motor mount \/ trans mount \/ dogbone mount that is firmer than the OEM mount can increase noise and\/or vibration to some level above the stock mount.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Black Forest Industries","offers":[{"title":"Default Title","offer_id":44897662370086,"sku":"EBFI78-Q5-021","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/bfi-stage-1-torque-arm-insert-2009-3.gif?v=1682128031"},{"product_id":"034-motorsport-b5-chassis-driveshaft-support","title":"034 Motorsport B5 Chassis Driveshaft Support","description":"\u003cp\u003eNew for B5 chassis vehicles. Not available from the dealer, custom manufactured by 034 Motorsport.\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44897685373222,"sku":"034-506-0002","price":73.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-506-0002-driveshaft-support-center-bearing-audi-b5-a4-s4.jpg?v=1682128513"},{"product_id":"034-motorsport-b6-b7-chassis-driveshaft-support","title":"034 Motorsport B6\/B7 Chassis Driveshaft Support","description":"\u003cp\u003e\u003cstrong\u003ePlease note that this part is currently on backorder with no known ETA.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eNew for B6\/B7 A4 vehicles. This part is not available from the dealer, custom manufactured by 034 Motorsport.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePlease note: This part is not for use in S4 or Allroad vehicles.\u003c\/strong\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44897685405990,"sku":"034-506-0003","price":73.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-506-0003-034motorsport-driveshaft-support-center-bearing-audi-a4-b6-b7-c5-a6-s6-rs6.jpg?v=1682128514"},{"product_id":"034-motorsport-b6-b7-chassis-v8-s4-driveshaft-support","title":"034 Motorsport B6\/B7 Chassis V8 S4 Driveshaft Support","description":"\u003cp\u003eNew for B6\/B7 S4 vehicles. This part is not available from the dealer, custom manufactured by 034 Motorsport.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePlease note: This part is not for use in A4 or Allroad vehicles.\u003c\/strong\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44897685438758,"sku":"034-506-0004","price":73.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-506-0004--034motorsport-b6_b7_audi_s4_v8_driveshaft_support_1.jpg?v=1682128516"},{"product_id":"jhm-transmission-mount-and-spacer-kit-for-automatic-tiptronic-transmissions-b6-b7-s4-c5-a6-s6-4-2-v8","title":"JHM Transmission Mount and Spacer Kit for Automatic\/Tiptronic Transmissions - B6\/B7 S4, C5 A6\/S6 4.2 V8","description":"\u003cp\u003eThis spacer and transmission mount will allow you to upgrade the driveline of your automatic\/tiptronic transmission B6-B7 S4 or C5-A6\/S6 with the 4.2L V8. \u003cbr\u003e\u003cbr\u003e Using 034Motorsport's B5-S4 Density Line Transmission Mount, we have created a solution for Automatic\/Tiptronic Transmission cars that will allow them to run upgraded transmission mounts. \u003cbr\u003e\u003cbr\u003e This Automatic Transmission Mount and Spacer Kit will include the spacers needed to run 034Motorsport's Transmission Mounts on your automatic car. Priced each (one car will require 2), these kits include: \u003cbr\u003e- 1x 034Motorsport Transmission Mount (Choose density below) \u003cbr\u003e- 1x JHMotorsports Automatic Transmission Mount Spacer \u003cbr\u003e- 1x JHMotorsports Transmission Mount Spacer Hardware Kit\u003c\/p\u003e\r\n\u003cp\u003eAvailable in either street (10% stiffer than stock) or track (90% stiffer than stock) density.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e2003-2005 Audi B6 S4\u003c\/li\u003e\r\n\u003cli\u003e2005.5-2008 Audi B7 S4\u003c\/li\u003e\r\n\u003cli\u003e2000-2004 Audi C5 A6\/S6 w\/ 4.2 V8\u003c\/li\u003e\r\n\u003cli\u003e2000-2005 Audi C5 Allroad w\/ 4.2 V8\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"JHM","offers":[{"title":"Street Density - 10% Stiffer","offer_id":44897740718374,"sku":"JHM-ATMSK","price":115.0,"currency_code":"USD","in_stock":true},{"title":"Track Density - 90% Stiffer","offer_id":44897740751142,"sku":"JHM-ATMSK","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/JHM-B6-B7-C5-A6_AT-Tiptronic_trans_mount_spacers_with_mount.jpg?v=1682129211"},{"product_id":"jhm-transmission-mount-spacer-for-automatic-tiptronic-transmissions-b6-b7-s4-c5-a6-s6-4-2-v8","title":"JHM Transmission Mount Spacer For Automatic\/Tiptronic Transmissions - B6\/B7 S4, C5 A6\/S6 4.2 V8","description":"\u003cp\u003eThis spacer for your 034Motorsport Density Line transmission mount will allow you to upgrade the driveline of your automatic\/tiptronic transmission B6-B7 S4 or C5-A6\/S6 with the 4.2L V8. \u003cbr\u003e\u003cbr\u003eJHM has created a solution for Automatic\/Tiptronic Transmission cars that will allow them to run 034Motorsport's B5-S4 Density Line Transmission Mounts. \u003cbr\u003e\u003cbr\u003e This Automatic Transmission Mount Spacer Kit includes the spacers and the hardware needed to run 034Motorsport's Transmission Mounts on your automatic or tiptronic car. \u003cbr\u003e \u003cbr\u003e Priced each (one car will require 2), these kits include: \u003cbr\u003e \u003cbr\u003e- 1x JHMotorsports Automatic Transmission Mount Spacer \u003cbr\u003e- 1x JHMotorsports Transmission Mount Spacer Hardware Kit\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e2003-2005 Audi B6 S4\u003c\/li\u003e\r\n\u003cli\u003e2005.5-2008 Audi B7 S4\u003c\/li\u003e\r\n\u003cli\u003e2000-2004 Audi C5 A6\/S6 w\/ 4.2 V8\u003c\/li\u003e\r\n\u003cli\u003e2000-2005 Audi Allroad w\/ 4.2 V8\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"JHM","offers":[{"title":"Default Title","offer_id":44897740783910,"sku":"JHM-ATMS","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/JHM_B6-B7_S4_AT-Tip-Trans_Spacer_ONLY_EACH.jpg?v=1682129213"},{"product_id":"034-motorsport-rear-crossmember-differential-carrier-billet-b4-b5-a4-s4","title":"034 Motorsport Rear Crossmember\/Differential Carrier, Billet - B4\/B5 A4 \/ S4","description":"\u003cp\u003eThe 034Motorsport Billet Rear Crossmember \/ Differential Carrier for the B5 Audi A4\/S4\/RS4 Quattro is an absolute must for serious drag\/road racing to prevent failure of the factory cast aluminum piece.\u003c\/p\u003e\n\u003cp\u003eThis high-quality piece was designed utilizing CAD software and is precision CNC machined in-house from billet aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\/Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eB4 Audi S2\/RS2\u003c\/li\u003e\n\u003cli\u003e1996 - 2001 Audi A4 Quattro (B5)\u003c\/li\u003e\n\u003cli\u003e2000 - 2002 Audi S4 (B5)\u003c\/li\u003e\n\u003cli\u003e2000 - 2002 Audi RS4 (B5)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eReplaces:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8D0 599 285 \/ 8D0599285\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44897746452774,"sku":"034-505-1000","price":428.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-505-1000-1.jpg?v=1682129305"},{"product_id":"apikol-rear-diff-mount-poly-b4-b5-chassis","title":"Apikol Rear Diff Mount, Poly - B4\/B5 Chassis","description":"\u003cp\u003eThis performance rear differential mount will provide a precise and direct feel to dramatically enhance your overall driving experience.\u003c\/p\u003e\n\u003cp\u003eHelps to alleviate drivetrain movement (clunks) when shifting and transitioning on and off the throttle\u003c\/p\u003e\n\u003cp\u003eEliminating drivetrain movement restores your vehicles crisp, tight feel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRODUCT CONSTRUCTION:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFabricated from high-strength aluminum alloy and finished with a durable, clear, corrosion-resistant anodize coating.\u003c\/p\u003e\n\u003cp\u003eApplication specific, custom urethane support bushings.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAPIKOL PART # 07A0230\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1992-1996 B4 Audi 80\/90 Quattro (all models world wide)\u003c\/li\u003e\n\u003cli\u003e1994-1996 Audi RS2\u003c\/li\u003e\n\u003cli\u003e1995-2001 B5 Audi A4 Quattro (all models world wide)\u003c\/li\u003e\n\u003cli\u003e1997-2002 B5 Audi S4 (all models world wide)\u003c\/li\u003e\n\u003cli\u003e2001-2002 B5 Audi RS4\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apikol","offers":[{"title":"Blue (Street)","offer_id":44897746551078,"sku":"07A0230","price":249.0,"currency_code":"USD","in_stock":true},{"title":"Green (Monster)","offer_id":47553192493350,"sku":"07A0230","price":249.0,"currency_code":"USD","in_stock":true},{"title":"Red (Race)","offer_id":47553192526118,"sku":"07A0230","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/files\/reardiffmount_ano_zoom_2_7.jpg?v=1706132586"},{"product_id":"034-motorsport-dogbone-mount-pair-density-line-mk5-mk6-b6-passat-cc-audi-a3-8p-tt-mk2","title":"034 Motorsport Dogbone Mount Pair, Density Line - Mk5\/Mk6, B6 Passat\/CC, Audi A3 8P \/ TT Mk2","description":"\u003cp\u003e034Motorsport's Density Line Mounts are the new standard in comfort and performance. These mounts have been redesigned with performance in mind, and manufactured from high-durometer rubber for increased performance and durability, without sacrificing comfort. The Density Line Mounts are void-free and fluid-free, eliminating the slop associated with the factory mount.\u003c\/p\u003e\n\u003cp\u003eThe Density Line Dogbone Mount Pair is manufactured from 60 durometer rubber, which is approximately 35% stiffer than stock. Since the mounts are also void-free and solid-filled, the resulting mount is approximately 85% stiffer than stock.\u003c\/p\u003e\n\u003cp\u003eThe result is greatly reduced drivetrain slop, crisper shifting, and minimal wheel hop, without any significant increase in noise, vibration, or harshness (NVH) inside of the cabin. These mounts are a completely re-engineered performance solution, not just inserts for use with the factory mount.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured from 60 Durometer Rubber with Void-Free Construction\u003c\/li\u003e\n\u003cli\u003eReduced Drivetrain Slop\u003c\/li\u003e\n\u003cli\u003eDecreased Engine Movement Under Load\u003c\/li\u003e\n\u003cli\u003eMore Direct Power Transfer\u003c\/li\u003e\n\u003cli\u003eImproved Shifting Feel\u003c\/li\u003e\n\u003cli\u003eComplete Drop-In Replacement of Factory Mounts\u003c\/li\u003e\n\u003cli\u003eSold in Pairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2005-2009 VW Mk5 Rabbit, Jetta, GTI, GLI\u003c\/li\u003e\n\u003cli\u003e2008 VW Mk5 Golf R32\u003c\/li\u003e\n\u003cli\u003e2010-2014 VW Mk6 Golf, Jetta, GTI, GLI\u003c\/li\u003e\n\u003cli\u003e2012-2013 VW Mk6 Golf R\u003c\/li\u003e\n\u003cli\u003e2006-2012 VW B6 Passat\u003c\/li\u003e\n\u003cli\u003e2009-2014 VW CC\u003c\/li\u003e\n\u003cli\u003e2005-2013 Audi A3\u003c\/li\u003e\n\u003cli\u003e2006-2014 Audi Mk2 TT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Year Limited Replacement Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNVH Levels: MED-HIGH\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNVH is the measurement of how much noise, vibration, \u0026amp; harshness gets transmitted into the cabin of your vehicle. Based on user feedback, 034Motorsport Street Density Dogbone Mounts (Pucks) transfer medium to high amounts of NVH to the cabin. NVH changes may be more noticeable in vehicles equipped with a DSG or Tiptronic transmission and\/or if your factory engine\/transmission mounts are worn or failed. We recommend the Street Density Dogbone Mounts at least 250 miles to break in after installation. NVH is subjective, so some users may find NVH to be increased or decreased from our rating. If you are experiencing higher than quoted NVH with this product, please evaluate the installation to ensure to components are touching each other and \u003cstrong\u003e\u003ca href=\"\/contact-us\" target=\"_blank\" title=\"Contact Us Page\" rel=\"noopener\"\u003econtact us\u003c\/a\u003e\u003c\/strong\u003e for further assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e \u003cstrong\u003eAny aftermarket motor mount \/ trans mount \/ dogbone mount that is firmer than the OEM mount can increase noise and\/or vibration to some level above the stock mount.\u003c\/strong\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44897814216998,"sku":"034-509-1009","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-509-1009-dogbone-mount-pair-density-line-volkswagen-mkv-mkvi-golf-jetta-gti-gli-audi-8j-tt-8p-a3.jpg?v=1682130343"},{"product_id":"034-motorsport-billet-alluminum-transmission-mount-insert-b8-audi-a4-s4-rs4-and-a5-s5-rs5","title":"034 Motorsport Billet Alluminum Transmission Mount Insert - B8 Audi A4 \/ S4 \/ RS4 and A5 \/ S5 \/ RS5","description":"\u003cp\u003eNGP is proud to offer 034Motorsport's Billet Aluminum Transmission Mount Insert for the B8 Audi A4\/S4\/RS4 and A5\/S5\/RS5! The factory Audi transmission mount has a large void in the rubber damping medium, which results in excessive transmission movement under load. This movement results in drivetrain slop that can be observed when accelerating, decelerating, and shifting.\u003c\/p\u003e\n\u003cp\u003eThis billet aluminum insert is designed to fill the large void in the factory transmission mount, and limit transmission movement without sacrificing ride quality or introducing any additional noise, vibration, or harshness into the cabin. By filling the void in the factory mount, this insert eliminates the associated slop and ensures that you're experiencing crisper shifts and a smoother driving experience.\u003c\/p\u003e\n\u003cp\u003eThis mount was thoroughly tested by 034Motorsport, JH Motorsports, and independent Audi enthusiasts before release. Installation is very simple, can be performed in minutes, and is completely reversible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Hardware:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe OE bolts used to secure the Transmission Mount Insert are one-time use torque to yield (TTY) bolts per VW\/Audi. This means that as these bolts are tightened, they stretch slightly and become permanently elongated. 034Motorsport includes new Grade 12.9 installation hardware, which is stronger than the OE torque to yield bolts and allows for re-use, and Blue Loctite for all customers. This Grade 12.9 hardware should be torqued to 30nm with Blue Loctite applied.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e \u003cstrong\u003eAny aftermarket motor mount \/ trans mount \/ dogbone mount that is firmer than the OEM mount can increase noise and\/or vibration to some level above the stock mount.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eT6-6061 Billet Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eCNC-Machined In-House\u003c\/li\u003e\n\u003cli\u003eClear Anodized Finish for Durability\u003c\/li\u003e\n\u003cli\u003eEngineered to Fill Void In Factory Transmission Mount\u003c\/li\u003e\n\u003cli\u003eDrastically Reduces Transmission Movement During Shifting and Deceleration\u003c\/li\u003e\n\u003cli\u003eImproves Shifting Feel, Resulting in Crisper Shifts\u003c\/li\u003e\n\u003cli\u003eWill Not Cause Additional NVH Transfer Inside Cabin\u003c\/li\u003e\n\u003cli\u003eEasy, Straightforward Installation Takes Minutes!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e034Motorsport Billet Aluminum Transmission Mount Insert\u003c\/li\u003e\n\u003cli\u003eGrade 12.9 Installation Hardware\u003c\/li\u003e\n\u003cli\u003eBlue Loctite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\/Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e2009-2016 Audi A4\u003c\/li\u003e\n\u003cli\u003e2008-2016 Audi A5\u003c\/li\u003e\n\u003cli\u003e2009-2016 Audi S4\u003c\/li\u003e\n\u003cli\u003e2008-2016 Audi S5\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAudi \/ A8 \/ D4 \/ 3.0 TFSI \/ 2011-2018\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAudi \/ A8 \/ D4 \/ 4.0 TFSI \/ 2011-2018\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAudi \/ A8 \/ D4 \/ 4.2 FSI \/ 2011-2018\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAudi \/ A8 \/ D4 \/ 6.3 W12 FSI \/ 2011-2018\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAudi \/ S8 \/ D4 \/ 4.0 TFSI \/ 2011-2018\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePorsche \/ Macan \/ 95B.1 \/ 2.0T FSI \/ 2014-2020\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePorsche \/ Macan S \/ 95B.1 \/ 3.0T FSI \/ 2015-2020\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePorsche \/ Macan GTS \/ 95B.1 \/ 3.0T FSI \/ 2019-2020\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePorsche \/ Macan Turbo \/ 95B \/ 3.6T FSI \/ 2015-2018\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePorsche \/ Macan Turbo w\/ Performance Pack \/ 95B.1 \/ 3.6T FSI \/ 2015-2019\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePorsche \/ Macan Turbo \/ 95B.2 \/ 2.9T FSI \/ 2019-2021\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44897825456422,"sku":"034-509-4014","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/files\/034motorsport-transmission-mount-insert-b8-audi-a4-s4-rs4-a5-s5-rs5-q5-sq5-billet-aluminum-034-509-4014-5.webp?v=1714051675"},{"product_id":"jhm-drivetrain-stabilizer-b5-a4-s4-c5-a6","title":"JHM Drivetrain Stabilizer - B5 A4\/S4, C5 A6","description":"\u003cp\u003eFor years JHM has been a big proponent of the DTS bar coupled with the JHM upgraded poly DTS mount for proper drivetrain stabilization for the demanding driver. The problem in the past has always been a high price and the soft rubber mount included. We now have the solution for both. The issue with the rubber mount with brand-x kits was that it just allowed the drivetrain (including the shifter which is attached to the transmission via linkage rod) to move forward and backwards too much. The rubber mount issue with current units that made the bar almost useless for hard launching, drag racing or heavy accel\/decel road racing type driving was our biggest complaint. So JHM introduced the Polyurethane mount upgrade many years ago to help reduce this forward and backward movement. And NOW to help with price we decided to introduce our own bar with the polyurethane mount included FREE of charge. So you no longer have to buy the DTS then the $40 mount upgrade. Along with including a free mount we redesigned the bar for durability. Over the years we have found that the brand-x bars small screws that held the cross bar in place would eventually strip out if removed and reinstalled too many times, we even ran into several customers whos bars were stripped bad enough that their bolts would fall out and require expensive threaded insert repairs. We solved this with the use of a interlocking design that uses one larger bolt per side and gets its strength due to the tongue and groove style. So enough about our new bar, lets get to the details of this group buy.\u003c\/p\u003e\r\n\u003cp\u003eThe JHM DTS is a straight bolt on upgrade using factory mounting points already on your car. NO cutting or welding needed!\u003c\/p\u003e\r\n\u003cp\u003eThe JHM DTS is designed to clear all OEM and aftermarket downpipes that are routed in factory locations and uses high quality materials with a FREE Polyurethane mount included for maximum forward\/backward movement reduction while aiding in some of the up and down movement as well.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePlease Note: \u003c\/strong\u003e\u003c\/em\u003eBeing that you are adding an extra mounting point for your transmission with a Polyurethane mount to help prevent movement of your engine and transmission little to no vibration will be felt vs. stock. We personally haven't noticed a difference and most customers say they don't notice it as well with the poly mount installed. Some hyper sensitive people may notice a tiny bit of vibration over stock and if this bothers you, you probably shouldn't be modifying your car anyway.\u003c\/p\u003e","brand":"JHM","offers":[{"title":"Default Title","offer_id":44897825653030,"sku":"JHM-B5C5DTS","price":339.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/JHM_DTS.jpg?v=1682130684"},{"product_id":"apikol-rear-differential-mount-polyurethane-billet-aluminum-b6-b7-audi-a4-s4-rs4","title":"Apikol Rear Differential Mount Polyurethane \u0026 Billet Aluminum - B6\/B7 Audi A4\/S4\/RS4","description":"\u003cp\u003eAPIKOL Performance Automotive Components presents the upgraded Rear Differential Mount System for the Audi B6 (A4, S4) chassis, and all Audi B7 (A4, S4, RS4) models. It is designed to eliminate excessive rear differential movement and cure the dreaded “clunk” caused by aggressive shifting and\/or acceleration. This is a must-have upgrade for higher mileage vehicles as well as anyone looking to increase drivetrain performance.\u003c\/p\u003e\r\n\u003cp\u003eNow machined from billet aluminum with custom molded urethane bushings.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e \u003cstrong\u003eAny aftermarket motor mount \/ trans mount \/ dogbone mount that is firmer than the OEM mount can increase noise and\/or vibration to some level above the stock mount.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Apikol","offers":[{"title":"Please Select","offer_id":44897829421350,"sku":"APK-10A02151_A","price":249.0,"currency_code":"USD","in_stock":true},{"title":"Street (blue)","offer_id":44897829454118,"sku":"APK-10A02151_A","price":249.0,"currency_code":"USD","in_stock":true},{"title":"Race (red)","offer_id":44897829486886,"sku":"APK-10A02151_A","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/b6-b7-rear.jpg?v=1682130759"},{"product_id":"apikol-rear-differential-mount-b8-a4-s4-a5-s5-q5-sq5","title":"Apikol Rear Differential Mount B8 A4 \/ S4 \/ A5 \/ S5 \/ Q5 \/ SQ5","description":"\u003cp\u003eThis performance rear differential mount for your B8 (A4, S4, A5, S5, RS5, Q5, A8, S8) will provide a precise and direct feel to dramatically enhance your overall driving experience.\u003c\/p\u003e\r\n\u003cp\u003eHelps to alleviate drivetrain movement (clunks) when shifting and transitioning on and off the throttle\u003c\/p\u003e\r\n\u003cp\u003eEliminating drivetrain movement restores your vehicles crisp, tight feel.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFabricated from high-strength stainless steel alloy\u003c\/li\u003e\r\n\u003cli\u003eApplication specific, custom urethane support bushing\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Apikol","offers":[{"title":"Please Select","offer_id":44897840464166,"sku":"11A02173","price":89.0,"currency_code":"USD","in_stock":false},{"title":"Blue - Daily","offer_id":44897840496934,"sku":"11A02173","price":89.0,"currency_code":"USD","in_stock":true},{"title":"Red - Race","offer_id":44897840529702,"sku":"11A02173","price":89.0,"currency_code":"USD","in_stock":true},{"title":"Red\/Blue Combo","offer_id":44897840562470,"sku":"11A02173","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/8733.jpg?v=1682130949"},{"product_id":"034-motorsport-billet-dogbone-mount-mk5-gti-rabbit-jetta-gli-mk6-gti-golf-jetta-gli-audi-a3-8p","title":"034 Motorsport Billet Dogbone Mount - Mk5 GTI \/ Rabbit \/ Jetta \/ GLI, Mk6 GTI \/ Golf \/ Jetta \/ GLI, Audi A3 8P","description":"\u003ch3\u003eWe're proud to announce the availability of the 034Motorsport Billet Dogbone Mount for the VW Mk5\/Mk6 and 8P Audi A3\/S3!\u003c\/h3\u003e\n\u003cp\u003e034Motorsport's Motorsport Dogbone Mount is the new standard in performance and durability. This dogbone mount was designed with performance in mind, and is manufactured in-house from billet aluminum. Unlike other products on the market that use a polyurethane bushing, our mount features a genuine Aurora Spherical Bearing to maintain proper articulation and offer some vibration dampening. The Motorsport Dogbone Mount is machined and assembled in-house, and designed to eliminate the slop associated with the factory mount.\u003c\/p\u003e\n\u003cp\u003eThe result is a locked-down drivetrain, solid shifting, and virtually no wheel hop. The Motorsport Dogbone Mount will cause some increase in noise, vibration, and harshness (NVH) inside of the cabin. This mounts is a completely re-engineered performance solution, not just inserts for use with the factory mount.\u003c\/p\u003e\n\u003cp\u003eThis upgrade was extensively tested on the street and track in various 034Motorsport product development vehicles before release.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eManufactured from T6-6061 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eGenuine Aurora Spherical Bearing\u003c\/li\u003e\n\u003cli\u003eGreatly Reduced Drivetrain Slop\u003c\/li\u003e\n\u003cli\u003eGreatly Reduced Engine Movement Under Load\u003c\/li\u003e\n\u003cli\u003eMore Direct Power Transfer\u003c\/li\u003e\n\u003cli\u003eImproved Shifting Feel and Accuracy\u003c\/li\u003e\n\u003cli\u003eComplete Drop-In Replacement of Factory Dogbone Mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\/Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e2006 - 2013 Audi A3\/S3 (8P)\u003cbr\u003e        All Engines\/Transmissions\u003c\/li\u003e\n\u003cli\u003e2005 - 2009 Volkswagen Eos \/ GLI \/ GTI \/ Jetta \/ R32 \/ Rabbit (Mk5)\u003cbr\u003e        All Engines\/Transmissions\u003c\/li\u003e\n\u003cli\u003e2010 - 2013 Volkswagen Eos \/ GLI \/ Golf \/ GTI \/ Jetta \/ R20 (Mk6)\u003cbr\u003e        All Engines\/Transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/store.034motorsport.com\/docs\/034motorsport-billet-dogbone-mount-solid-spherical-mkv-mkvi-8j-8p-audi-volkswagen-installation-instructions.pdf\" target=\"_blank\"\u003eCheck them out here.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e1 Year limited replacement warranty\u003c\/li\u003e\n\u003cli\u003e034Motorsport products that are installed with BFI motor or transmission mount products will not qualify for warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e \u003cstrong\u003eAny aftermarket motor mount \/ trans mount \/ dogbone mount that is firmer than the OEM mount can increase noise and\/or vibration to some level above the stock mount.\u003c\/strong\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44897841381670,"sku":"034-509-1016","price":276.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-509-1016-034motorsport-billet-dogbone-mount-solid-spherical-mkv-mkvi-8j-8p-audi-volkswagen-20t-fsi-tsi-25l-i5-32l-vr6-gti-gli-golf-jetta-r32-tt-a3-3_1.jpg?v=1682131004"},{"product_id":"034motorsport-rear-differential-carrier-mount-insert-kit-b6-b7-audi-a4-s4-rs4-billet-aluminum","title":"034Motorsport Rear Differential Carrier Mount Insert Kit, B6\/B7 Audi A4\/S4\/RS4, Billet Aluminum","description":"\u003cp\u003eThese billet aluminum inserts are designed to fill the voids in the factory B6\/B7 Audi A4\/S4\/RS4 rear differential carrier mounts, and limit rear differential movement without sacrificing ride quality or introducing any additional noise, vibration, or harshness into the cabin. By filling the voids in the factory mounts, this insert eliminate the associated slop and ensures that you're experiencing smoother shifting and throttle transitions, and an improved driving experience.\u003c\/p\u003e\r\n\u003cp\u003eInstallation is very simple, can be performed in minutes, and is completely reversible.\u003c\/p\u003e\r\n\u003cp\u003e034Motorsport is pleased to present our new Billet Aluminum Rear Differential Carrier Mount Insert Upgrade for the B6\/B7 Audi A4\/S4\/RS4! The factory Audi rear differential carrier bushings have voids in the rubber damping medium, which results in excessive rear differential movement (twisting) under load. This movement allows for unwanted drivetrain slop (and sometimes clunks) than can be observed when accelerating, decelerating, and shifting.\u003c\/p\u003e\r\n\u003cp\u003eThese billet aluminum inserts are designed to fill the voids in the factory B6\/B7 Audi A4\/S4\/RS4 rear differential carrier mounts, and limit rear differential movement without sacrificing ride quality or introducing any additional noise, vibration, or harshness into the cabin. By filling the voids in the factory mounts, these inserts eliminate the associated slop and ensures that you're experiencing smoother shifting and throttle transitions, and an improved driving experience.\u003c\/p\u003e\r\n\u003cp\u003eInstallation is very simple, can be performed in minutes, and is completely reversible.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e \u003cstrong\u003eAny aftermarket motor mount \/ trans mount \/ dogbone mount that is firmer than the OEM mount can increase noise and\/or vibration to some level above the stock mount.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCNC-Machined Billet Aluminum Construction with Clear Anodized Finish\u003c\/li\u003e\r\n\u003cli\u003eApplication-Specific Design Featuring Stainless Steel Securing Washers\u003c\/li\u003e\r\n\u003cli\u003eEngineered to Fill Voids In Factory Rear Differential Mounts\u003c\/li\u003e\r\n\u003cli\u003eDrastically Reduces Rear Differential Movement During Shifting, Acceleration, and Deceleration\u003c\/li\u003e\r\n\u003cli\u003eImproves Shifting Feel, Resulting in Crisper Shifts\u003c\/li\u003e\r\n\u003cli\u003eWill Not Cause Additional NVH Transfer Inside Cabin\u003c\/li\u003e\r\n\u003cli\u003eEasy, Straightforward Installation Takes Minutes!\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e034Motorsport Billet Aluminum Rear Differential Carrier Mount Insert Pair\u003c\/li\u003e\r\n\u003cli\u003eHigh Strength Stainless Steel Securing Washer Pair\u003c\/li\u003e\r\n\u003cli\u003eInstallation Instructions:\u003c\/li\u003e\r\n\u003cli\u003eWeb - PDF\u003c\/li\u003e\r\n\u003cli\u003eProduct Information Sheet\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2002 - 2005 Audi A4 (B6)\u003c\/li\u003e\r\n\u003cli\u003eQuattro Models Only\u003c\/li\u003e\r\n\u003cli\u003e2003 - 2005 Audi S4 (B6)\u003c\/li\u003e\r\n\u003cli\u003e2005.5 - 2008 Audi A4 (B7)\u003c\/li\u003e\r\n\u003cli\u003eQuattro Models Only\u003c\/li\u003e\r\n\u003cli\u003e2005.5 - 2008 Audi S4 (B7)\u003c\/li\u003e\r\n\u003cli\u003e2006 - 2008 Audi RS4 (B7)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstalls Into:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e8E0 599 257K \/ 8E0599257K\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44897863663910,"sku":"034-505-2015","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-505-2015-034motorsport-b6-b7-audi-a4-s4-rs4-quattro-rear-differential-carrier-mount-insert-upgrade-billet-aluminum-kit.jpg?v=1682131687"},{"product_id":"034motorsport-billet-aluminum-mqb-lower-dogbone-mount-insert-mk8-mk7-mk7-5-vw-golf-gti-r-alltrack-gli-8v-audi-a3-s3-8s-tt-tts-ttrs","title":"034Motorsport Billet Aluminum MQB Lower Dogbone Mount Insert - Mk8, Mk7, Mk7.5 VW Golf\/GTI\/R\/Alltrack\/GLI, 8V Audi A3\/S3, 8S TT\/TTS\/TTRS","description":"\u003cp\u003e034Motorsport is pleased to present a new performance dogbone mount (torque arm bushing) insert upgrade for the MkVII Volkswagen Golf\/GTI\/R and 8V Audi A3\/S3!\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThis product has been updated. \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"\/products\/034motorsport-billet-aluminum-upper-lower-dogbone-mount-insert-pair-volkswagen-audi-mqb-and-mqb-evo\" title=\"034Motorsport MQB\/MQB Evo Dogbone Mount Insert Kit - Updated Kit\"\u003ePlease see the updated listing by clicking or tapping here\u003c\/a\u003e\u003c\/span\u003e.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eHave you increased the power output of your vehicle beyond the factory figures and are in need of a performance mount solution to effectively deliver that power to the ground? Are you tired of excess engine\/transmission movement hindering shift quality and performance? The factory dogbone mount is one of the weakest links in the drivetrain, and is engineered with voids that allow for movement, isolating the driver from the road.\u003c\/p\u003e\n\u003cp\u003eThis precision-machined billet aluminum insert is designed to fill the large voids in the factory dogbone mount, and limit transmission and engine movement without sacrificing ride quality or introducing any perceivable additional noise, vibration, or harshness into the cabin. By filling the void in the factory mount, this insert eliminates the associated slop and ensures that you're experiencing crisper shifts and a more direct, connected driving experience.\u003c\/p\u003e\n\u003cp\u003eEngineered to work in unison with the factory rubber mount, this insert was designed using CAD software and thoroughly tested and refined to provide noticeable slop reduction without introducing excessive noise or vibration into the cabin, which is common with lesser designs. Unlike polyurethane insert options on the market, this billet aluminum part will not pack and wear over time, and guarantees long-lasting performance.\u003c\/p\u003e\n\u003cp\u003eThis mount was thoroughly tested by 034Motorsport and independent Audi\/Volkswagen enthusiasts before release on new MQB chassis vehicles. Installation is very simple, can be performed in minutes, and is completely reversible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eT6-6061 Billet Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eCNC-Machined In-House\u003c\/li\u003e\n\u003cli\u003eClear Anodized Finish for Durability\u003c\/li\u003e\n\u003cli\u003eEngineered to Fill Void In Factory Transmission Mount\u003c\/li\u003e\n\u003cli\u003eDrastically Reduces Transmission Movement During Shifting and Deceleration\u003c\/li\u003e\n\u003cli\u003eImproves Shifting Feel, Resulting in Crisper Shifts\u003c\/li\u003e\n\u003cli\u003eVirtually No Additional NVH Transfer Inside Cabin\u003c\/li\u003e\n\u003cli\u003eEasy, Straightforward Installation Takes Minutes!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e034Motorsport Billet Aluminum MQB Dogbone Mount Insert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e2015 - 2020 Audi A3\/S3 (8V - MQB)\u003c\/li\u003e\n\u003cli\u003e2015 - Present Audi TT\/TTS\/TTRS (8S - MQB)\u003c\/li\u003e\n\u003cli\u003e2015 - 2021 Volkswagen Golf, GTI, R, Sportwagen, Alltrack (Mk7, Mk7.5 - MQB)\u003c\/li\u003e\n\u003cli\u003e2018 - Present Volkswagen Tiguan (5NA\/MQB, Does not fit Tiguan Limited)\u003c\/li\u003e\n\u003cli\u003e2019 - Present Volkswagen Jetta GLI (Mk7 - MQB)\u003c\/li\u003e\n\u003cli\u003e2022 - Present Volkswagen GTI, Golf R (Mk8 - MQB Evo)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease Note: Some Mk7 GTI and Golf R models are equipped with a different factory dogbone mount. To ensure fitment on your vehicle, please visually verify the mount you have using the the above comparison image, then select the Version 1 or Version 2 insert before adding the item to your cart.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e \u003cstrong\u003eAny aftermarket motor mount \/ trans mount \/ dogbone mount that is firmer than the OEM mount can increase noise and\/or vibration to some level above the stock mount.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44897896497446,"sku":"034-509-102X","price":57.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-mqb-dbmi-034motorsport-billet-aluminum-mqb-dogbone-mount-insert-8v-audi-a3-s3-rs3-8s-mkiii-tt-tts-ttrs-mkvii-volkswagen-gti-golf-r_1.jpg?v=1682132664"},{"product_id":"apr-pendulum-mount-2-0t-and-1-8t-vw-mk5-mk6-audi-a3-8p","title":"APR Pendulum Mount 2.0T and 1.8T VW Mk5 \/ Mk6 , Audi A3 8P","description":"\u003cp\u003e\u003cstrong\u003eIn stock and ready to ship!\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eNGP is pleased to present the ultimate Pendulum Mount Upgrade!\u003cbr\u003e\u003cbr\u003eThe APR Pendulum mount replaces the factory mount with a new, thick, billet-aluminum two-piece design, featuring a PTFE-lined spherical bearing and ARP bolts. The system stiffens the driveline to improve shift quality and power transition, while addressing the common and costly factory failure point at the transmission mounting location. It is easy to install, addresses all concerns with the factory setup and includes all necessary hardware to bolt on and enjoy!\u003c\/p\u003e\r\n\u003cp style=\"padding-left: 30px;\"\u003e\u003cstrong\u003eQuick Facts:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eReduces transmission movement\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003eBy removing the factory rubber bushing, the APR system reduces slop in the driveline to improve shifts, and transmission of power to the ground. Expect a sportier feel during acceleration, deceleration and gear changes without an excessive increase in NVH when paired with the factory sub-frame mount.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp style=\"padding-left: 30px;\"\u003e\u003cstrong\u003e Reduces transmission failure\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003eThe factory rear mounting point was upgraded to the new MQB \/ MK7 platform style mount as the older design was prone to failure under heavy use. Because of the new design’s mounting orientation, the system is far less likely to tear out or break the rear bolts, which typically results in costly repairs or full transmission case replacement.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp style=\"padding-left: 30px;\"\u003e\u003cstrong\u003e Spherical bearing\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003eSpherical bearings offer far less unwanted movement over rubber and polyurethane inserts. As such, the APR mount uses a spherical bearing, made possible by upgrading the rear mounting hardware. The bearing is fully-serviceable, features a heat-treated race and precision-ground ball, with a self-sealing and self-lubricating PTFE lining.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp style=\"padding-left: 30px;\"\u003e\u003cstrong\u003e Billet aluminum construction\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003eThe front and rear pieces replace the factory cast aluminum and stamped steel pieces with precisely machined, billet-aluminum pieces that are both lightweight and strong. Each piece is anodized black to provide corrosion resistance and the APR logo is laser etched on each side.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp style=\"padding-left: 30px;\"\u003e \u003cstrong\u003eARP Bolts\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003eThe factory bolts are one-time-use, and must be replaced when installing a new mount. The APR system includes non-one-time-use ARP bolts for their strength, quality and longevity over the factory bolts.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp style=\"padding-left: 30px;\"\u003e \u003cstrong\u003eEasy to install\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003eThe system is easy to install, doesn’t require dropping the sub-frame and is compatible with the factory and factory-like modified sub-frame mounts. Full install directions are included with each system.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFits Following Applications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003eMK5 and MK6 platform vehicles including Golf\/GTI\/R\/Jetta\/GLI 2.0T\u003c\/li\u003e\r\n\u003cli\u003eAudi A3 8P\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e \u003cstrong\u003eAny aftermarket motor mount \/ trans mount \/ dogbone mount that is firmer than the OEM mount can increase noise and\/or vibration to some level above the stock mount. Does not fit B6 Passat, CC, Tiguan or Mk2 TT models!\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"APR","offers":[{"title":"Default Title","offer_id":44897931493670,"sku":"MS100106","price":357.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/apr-pendulum_mount-ms100106.jpg?v=1682133106"},{"product_id":"034-motorsport-billet-aluminum-mqb-rear-subframe-mount-inserts-8v-audi-a3-s3-quattro-mkiii-audi-tt-tts-ttrs-quattro-mk7-vw-golf-r","title":"034 Motorsport Billet Aluminum MQB and MQB EVO Rear Subframe Mount Inserts, 8V Audi A3\/S3 Quattro, 8S AUDI TT\/TTS\/TTRS QUATTRO, Mk7 VW Golf R","description":"\u003cp\u003eThe 034Motorsport Billet Aluminum MQB Rear Subframe Mount Inserts for MkVII Volkswagen Golf\/GTI\/R and 8V Audi A3\/S3 are designed to limit movement in the factory rear subframe mounts to maintain proper suspension geometry when cornering, and improve the responsiveness of the rear suspension and differential.\u003cbr\u003e\u003cbr\u003eBy filling small voids in the four factory mounts as well as limiting vertical movement, this insert set eliminates the associated slop to ensure that you experience a more refined, connected driving experience, especially when driving at the limit. These billet aluminum parts will not pack and wear over time, and offer a lasting performance improvement.\u003c\/p\u003e\n\u003cp\u003ePlease Note: The factory rear subframe bolts are torque-to-yield bolts, and we recommend replacing them when installing these inserts. A new set of four OEM bolts is available separately below.\u003c\/p\u003e\n\u003cp\u003eMQB Audi\/Volkswagen vehicles equipped with Haldex AWD use rubber rear subframe mounts which deflect under load, causing the rear end to feel vague and loose, as well as leading to less-than-optimal suspension geometry and increased understeer. These precision-machined billet aluminum inserts are designed to fill voids in the factory rear subframe mounts, and limit subframe movement without sacrificing ride quality or introducing any perceivable additional noise, vibration, or harshness into the cabin. The result is a more refined, connected driving experience, as well as improved effectiveness of aftermarket rear sway bar upgrades and suspension components.\u003c\/p\u003e\n\u003cp\u003eDesigned to work in conjunction with the factory rubber mounts, this insert package was engineered using CAD software and thoroughly tested and refined to provide a significant improvement in handling performance and feel.\u003c\/p\u003e\n\u003cp\u003eThese inserts were tested extensively by 034Motorsport and independent Audi\/Volkswagen enthusiasts before release on new MQB chassis AWD vehicles. Installation is very simple, can be performed in under an hour, and is completely reversible.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e \u003cstrong\u003eAny aftermarket motor mount \/ trans mount \/ dogbone mount that is firmer than the OEM mount can increase noise and\/or vibration to some level above the stock mount.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eT6-6061 Billet Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eCNC-Machined In-House\u003c\/li\u003e\n\u003cli\u003eClear Anodized Finish for Durability\u003c\/li\u003e\n\u003cli\u003eEngineered to Fill Voids In Factory Rear Subframe Mounts\u003c\/li\u003e\n\u003cli\u003eHelps Maintain Proper Suspension Geometry When Cornering\u003c\/li\u003e\n\u003cli\u003eReduces Rear Subframe Movement During Launches and Acceleration\u003c\/li\u003e\n\u003cli\u003eImproves Shifting Feel, Resulting in Crisper Shifts\u003c\/li\u003e\n\u003cli\u003eVirtually No Additional NVH Transfer Inside Cabin\u003c\/li\u003e\n\u003cli\u003eEasy, Straightforward Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e034Motorsport Billet Aluminum MQB AWD Rear Subframe Insert - Front (Pair)\u003c\/li\u003e\n\u003cli\u003e034Motorsport Billet Aluminum MQB AWD Rear Subframe Insert - Rear (Pair)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e2022 - Present Volkswagen Golf R (Mk8 - MQB Evo)\u003c\/li\u003e\n\u003cli\u003e2015 - Present Audi A1\/S1 Quattro (8X)\u003c\/li\u003e\n\u003cli\u003e2015 - Present Audi A3\/S3\/RS3 Quattro (8V - MQB)\u003c\/li\u003e\n\u003cli\u003e2016 - Present Audi TT\/TTS\/TTRS Quattro (MkIII - MQB)\n\u003cul class=\"bullet\"\u003e\n\u003cli style=\"font-weight: bold; font-style: italic;\"\u003e\u003cem\u003e\u003cstrong\u003eDoes NOT fit TT\/TTS\/TTRS Convertible Models\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e2015 - Present Volkswagen Golf R (MkVII - MQB)\u003c\/li\u003e\n\u003cli\u003e2015 - Present Volkswagen Sportwagen\/Alltrack (MkVII - MQB)\u003c\/li\u003e\n\u003cli\u003e2013 - 2015 Audi TT\/TTS\/TTRS Quattro (8J) - With Build Date After 05\/29\/2012\n\u003cul\u003e\n\u003cli\u003eFits AWD Vehicles Only\u003c\/li\u003e\n\u003cli\u003eDoes Not Fit 2.0 TDI Models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e The factory rear subframe bolts are torque-to-yield bolts, and we recommend replacing them when installing these inserts. A new set of four OEM bolts is available separately above.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.034motorsport.com\/docs\/mqb-audi-volkswagen-awd-rear-subframe-mount-insert-kit-8v-a3-s3-quattro-mk7-vw-golf-r-install-guide-diy-instructions-034-601-0032.pdf\" target=\"_blank\" title=\"Installation Instructions\" rel=\"noopener\"\u003ePlease click or tap here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"No","offer_id":44898004664614,"sku":"034-601-0032","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Yes","offer_id":44898004631846,"sku":"034-601-0032+N10715901","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-601-0032-034motorsport-insert-set-rear-subframe-mqb-mk7-awd_1.jpg?v=1682133931"},{"product_id":"bfi-vw-mk7-mqb-pre-assembled-stage-1-transmission-mount-6-speed-dsg","title":"BFI MQB Transmission Mount - 6 speed Manual (MQ250\/350) \/ DSG (DQ250\/DQ381) - Stage 1","description":"\u003cp\u003eThe Black Forest Industries Complete Replacement Transmission Mount has been a long time in the making. They've spent countless hours of R\u0026amp;D and road testing to bring this total solution to market. We're confident that this is the the most robust, most durable, and best performance transmission mount available for the MQB platform, period. Available in two different durometers to suit any driving style, with its indestructible billet aluminum brackets machined right here in-house!\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSTAGE 1\u003c\/strong\u003e with its 70a durometer bushings are geared towards the spirited enthusiast who wants better control over motor movement without the sacrifice of excessive vibrations. This are the best choice for daily-driven vehicles and are recommended for majority of our customers.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSTAGE 2\u003c\/strong\u003e with its 85a durometer bushings are for the enthusiast who is looking for maximum performance from his motor mounts - great for heavily modified street cars and track cars. Expect a noticeable increase in noise, vibration and harshness when adding Stage 2 mounts to your vehicle.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFitment\/Applications\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e2022+ VW Mk8 GTI with 6-speed manual or DSG transmission\u003c\/li\u003e\r\n\u003cli\u003e2022+ VW Mk8 Golf R with 6-speed manual or DSG transmission\u003c\/li\u003e\r\n\u003cli\u003e2022+ VW Arteon with DSG transmission\u003c\/li\u003e\r\n\u003cli\u003e2015-2021 VW Mk7, Mk7.5 GTI with 6-speed manual or DQ250\/DQ381 DSG transmission\u003c\/li\u003e\r\n\u003cli\u003e2015-2021 VW Mk7, Mk7.5 Golf R with 6-speed manual or DQ250\/DQ381 DSG transmission\u003c\/li\u003e\r\n\u003cli\u003e2019+ VW Mk7 GLI with 6-speed manual or DSG transmission\u003c\/li\u003e\r\n\u003cli\u003e2015-2020 Audi 8V A3 \u0026amp; S3 with 6-speed manual or DQ250\/DQ381 DSG transmission\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eFits both 6 and 7 speed DSG transmissions.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Black Forest Industries","offers":[{"title":"Default Title","offer_id":44898026881318,"sku":"EBFI77-T7-601","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/bfi-mk7-6-speed-dsg-transmission-mount-1.jpg?v=1682134177"},{"product_id":"bfi-vw-mk7-mqb-pre-assembled-stage-2-transmission-mount-6-speed-dsg","title":"BFI MQB Transmission Mount - 6 speed Manual (MQ250\/350) \/ DSG (DQ250\/DQ381) - Stage 2","description":"\u003cp\u003eThe Black Forest Industries Complete Replacement Transmission Mount has been a long time in the making. They've spent countless hours of R\u0026amp;D and road testing to bring this total solution to market. We're confident that this is the the most robust, most durable, and best performance transmission mount available for the MQB platform, period. Available in two different durometers to suit any driving style, with its indestructible billet aluminum brackets machined right here in-house!\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSTAGE 1\u003c\/strong\u003e with its 70a durometer bushings are geared towards the spirited enthusiast who wants better control over motor movement without the sacrifice of excessive vibrations. This are the best choice for daily-driven vehicles and are recommended for majority of our customers.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSTAGE 2\u003c\/strong\u003e with its 85a durometer bushings are for the enthusiast who is looking for maximum performance from his motor mounts - great for heavily modified street cars and track cars. Expect a noticeable increase in noise, vibration and harshness when adding Stage 2 mounts to your vehicle.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFitment\/Applications\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e2022+ VW Mk8 Golf R with 6-speed manual or DSG transmission\u003c\/li\u003e\r\n\u003cli\u003e2022+ VW Mk8 GTI with 6-speed manual or DSG transmission\u003c\/li\u003e\r\n\u003cli\u003e2022+ VW Arteon with DSG transmission\u003c\/li\u003e\r\n\u003cli\u003e2015-2021 VW Mk7, Mk7.5 GTI with 6-speed manual or DQ250\/DQ381 DSG transmission\u003c\/li\u003e\r\n\u003cli\u003e2015-2021 VW Mk7, Mk7.5 Golf R with 6-speed manual or DQ250\/DQ381 DSG transmission\u003c\/li\u003e\r\n\u003cli\u003e2019+ VW Mk7 GLI with 6-speed manual or DSG transmission\u003c\/li\u003e\r\n\u003cli\u003e2015+ Audi 8V A3 \u0026amp; S3 with 6-speed manual or DQ250\/DQ381 DSG transmission\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eFits both 6 and 7 speed DSG transmissions.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Black Forest Industries","offers":[{"title":"Default Title","offer_id":44898026914086,"sku":"EBFI77-T7-602","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/bfi-mk7-6-speed-dsg-transmission-mount-stage-2-1.jpg?v=1682134180"},{"product_id":"034motorsport-billet-aluminum-transmission-mount-insert-b9-b9-5-audi-a4-s4-a5-s5-rs5-q5-sq5-allroad-c8-rs6-rs7-d5-s8","title":"034Motorsport Billet Aluminum Transmission Mount Insert, B9\/B9.5 Audi A4\/S4, A5\/S5\/RS5, Q5\/SQ5, Allroad, C8 RS6\/RS7, D5 S8","description":"\u003cp\u003eNGP is proud to offer The 034Motorsport Billet Aluminum Transmission Mount Insert for the B9 Audi A4! The factory Audi transmission mount has a large void in the rubber damping medium, which results in excessive transmission movement under load.This movement results in drivetrain slop than can be observed when accelerating, decelerating, and shifting.\u003c\/p\u003e\n\u003cp\u003eThe 034 billet aluminum insert is designed to fill the large void in the factory transmission mount, and limit transmission movement without sacrificing ride quality or introducing any additional noise, vibration, or harshness into the cabin. By filling the void in the factory mount, this insert eliminates the associated slop and ensures that you're experiencing crisper shifts and a smoother driving experience.\u003c\/p\u003e\n\u003cp\u003eThis mount was thoroughly tested by 034Motorsport, and independent Audi enthusiasts before release. Installation is very simple, can be performed in minutes, and is completely reversible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Hardware:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe OE bolts used to secure the Transmission Mount Insert are one-time use torque to yield (TTY) bolts per VW\/Audi. This means that as these bolts are tightened, they stretch slightly and become permanently elongated. 034Motorsport includes new Grade 12.9 installation hardware, which is stronger than the OE torque to yield bolts and allows for re-use, and Blue Loctite for all customers. This Grade 12.9 hardware should be torqued to 30nm with Blue Loctite applied.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eT6-6061 Billet Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eCNC-Machined In-House\u003c\/li\u003e\n\u003cli\u003eClear Anodized Finish for Durability\u003c\/li\u003e\n\u003cli\u003eEngineered to Fill Void In Factory Transmission Mount\u003c\/li\u003e\n\u003cli\u003eDrastically Reduces Transmission Movement During Shifts and Under Decel\u003c\/li\u003e\n\u003cli\u003eImproves Shifting Feel, Resulting in Crisper Shifts\u003c\/li\u003e\n\u003cli\u003eWill Not Cause Additional NVH Transfer Inside Cabin\u003c\/li\u003e\n\u003cli\u003eEasy, Straightforward Installation Takes Minutes!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e034Motorsport Billet Aluminum Transmission Mount Insert\u003c\/li\u003e\n\u003cli\u003eGrade 12.9 Installation Hardware\u003c\/li\u003e\n\u003cli\u003eBlue Loctite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\/Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e2017 - Present Audi A4 (B9\/B9.5)\u003c\/li\u003e\n\u003cli\u003e2018 - Present Audi S4 (B9\/B9.5)\u003c\/li\u003e\n\u003cli\u003e2018 - Present Audi A5 (B9\/B9.5)\u003c\/li\u003e\n\u003cli\u003e2018 - Present Audi S5 (B9\/B9.5)\u003c\/li\u003e\n\u003cli\u003e2018 - Present Audi RS5 (B9\/B9.5)\u003c\/li\u003e\n\u003cli\u003e2019 - Present Audi RS6 (C8)\u003c\/li\u003e\n\u003cli\u003e2018 - Present Audi SQ5 (B9)\u003c\/li\u003e\n\u003cli\u003e2017 - Present Audi Allroad (B9)\u003c\/li\u003e\n\u003cli\u003e2020 - Present Audi RS6 4.0 TFSI (C8)\u003c\/li\u003e\n\u003cli\u003e2019 - Present Audi RS7 4.0 TFSI (C8)\u003c\/li\u003e\n\u003cli\u003e2020 - Present Audi SQ7 4.0 TFSI (4M.5)\u003c\/li\u003e\n\u003cli\u003e2019 - Present Audi SQ8 3.0 TFSI (4M8)\u003c\/li\u003e\n\u003cli\u003e2019 - Present Audi S8 4.0 TFSI (D5)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instuctions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/store.034motorsport.com\/docs\/b9-audi-a4-transmission-mount-insert-installation-guide-diy-034-509-4053.pdf\" target=\"_blank\"\u003ePlease click or tap here\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44898072297766,"sku":"034-509-4053","price":91.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/files\/034motorsport-transmission-mount-insert-b9-audi-a4-billet-aluminum-034-509-4043-5.webp?v=1714051785"},{"product_id":"034-motorsport-billet-aluminum-dogbone-mount-insert-for-2009-mk5-mk6-volkswagen-golf-jetta-gti-gli-and-8j-8p-audi-tt-a3","title":"034 Motorsport Billet Aluminum Dogbone Mount Insert for 2009+ Mk5\/Mk6 Volkswagen Golf\/Jetta\/GTI\/GLI and 8J\/8P Audi TT\/A3","description":"\u003cp\u003eThe 034Motorsport Billet Aluminum Dogbone Mount Insert for 2009+ MkV\/MkVI Volkswagen Golf\/Jetta\/GTI\/GLI and 8J\/8P Audi TT\/A3 is designed to fill the large void in the factory dogbone mount, and limit transmission movement without sacrificing ride quality or introducing excessive additional noise, vibration, or harshness into the cabin. By filling the void in the factory mount, this insert eliminates the associated slop to ensure that you experience crisper shifts and a smoother driving experience.\u003c\/p\u003e\r\n\u003cp\u003eHave you increased the power output of your vehicle beyond the factory figures and are in need of a performance mount solution to effectively deliver that power to the ground? Are you tired of excess engine\/transmission movement hindering shift quality and performance? The factory dogbone mount is one of the weakest links in the drivetrain, and is engineered with voids that allow for movement, isolating the driver from the road.\u003cbr\u003e\u003cbr\u003eThis precision-machined billet aluminum insert is designed to fill the large voids in the factory dogbone mount, and limit transmission and engine movement without sacrificing ride quality or introducing any perceivable additional noise, vibration, or harshness into the cabin. By filling the void in the factory mount, this insert eliminates the associated slop and ensures that you're experiencing crisper shifts and a more direct, connected driving experience.\u003cbr\u003e\u003cbr\u003eEngineered to work in unison with the factory rubber mount, this insert was designed using CAD software and thoroughly tested and refined to provide noticeable slop reduction without introducing excessive noise or vibration into the cabin, which is common with lesser designs. Unlike polyurethane insert options on the market, this billet aluminum part will not pack and wear over time, and guarantees long-lasting performance.\u003cbr\u003e\u003cbr\u003eThis mount was thoroughly tested by 034Motorsport and independent Audi\/Volkswagen enthusiasts before release. Installation is very simple, can be performed in minutes, and is completely reversible.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003eT6-6061 Billet Aluminum Construction\u003c\/li\u003e\r\n\u003cli\u003eCNC-Machined In-House\u003c\/li\u003e\r\n\u003cli\u003eClear Anodized Finish for Durability\u003c\/li\u003e\r\n\u003cli\u003eEngineered to Fill Void In Factory Transmission Mount\u003c\/li\u003e\r\n\u003cli\u003eDrastically Reduces Transmission Movement During Shifting and Deceleration\u003c\/li\u003e\r\n\u003cli\u003eImproves Shifting Feel, Resulting in Crisper Shifts\u003c\/li\u003e\r\n\u003cli\u003eVirtually No Additional NVH Transfer Inside Cabin\u003c\/li\u003e\r\n\u003cli\u003eEasy, Straightforward Installation Takes Minutes!\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e034Motorsport Billet Aluminum Dogbone Mount Insert\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e2009 - 2013 Audi A3 (8P)\u003c\/li\u003e\r\n\u003cli\u003e2009 - 2014 Audi TT \/ TTS \/ TTRS (8J)\u003c\/li\u003e\r\n\u003cli\u003e2009 Volkswagen Eos \/ GLI \/ GTI \/ Jetta \/ Rabbit (MkV)\u003c\/li\u003e\r\n\u003cli\u003e2010 - 2014 Volkswagen Eos\/ Golf \/ GTI \/ Golf R (MkVI)\u003c\/li\u003e\r\n\u003cli\u003e2010 - 2016 Volkswagen Jetta\/ GLI (MkVI)\u003c\/li\u003e\r\n\u003cli\u003e2009 - 2011 Volkswagen Passat (B6)\u003c\/li\u003e\r\n\u003cli\u003e2009 - 2013 Volkswagen CC\u003c\/li\u003e\r\n\u003cli\u003e2009 - 2016 Volkswagen Tiguan\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/store.034motorsport.com\/blog\/late-mkv-mkvi-vokswagen-golf-jetta-gti-gli-dogbone-mount-insert-installation-guide\/\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44898091663654,"sku":"034-509-1021","price":53.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-509-1021-billet-dogbone-mount-insert-upgrade-mkv-mkvi-volkswagen-golf-jetta-gti-gli-8j-8p-audi-tt-a3-torque-arm.jpg?v=1682135845"},{"product_id":"034motorsport-transmission-mount-insert-c7-audi-a6-s6-rs6-and-a7-s7-rs7-billet-aluminum","title":"034Motorsport Transmission Mount Insert, C7 Audi A6\/S6\/RS6 \u0026 A7\/S7\/RS7, 4M\/4M.5 Q7","description":"\u003cp\u003e034Motorsport is proud to offer their Billet Aluminum Transmission Mount Insert for the C7 Audi A6\/S6\/RS6, A7\/S7\/RS7, and 4M\/4M.5 Q7! The factory Audi transmission mount has a large void in the rubber damping medium, which results in excessive transmission movement under load. This movement results in drivetrain slop than can be observed when accelerating, decelerating, and shifting.\u003c\/p\u003e\n\u003cp\u003eThis billet aluminum insert is designed to fill the large void in the factory transmission mount, and limit transmission movement without sacrificing ride quality or introducing excessive noise, vibration, or harshness into the cabin. By filling the void in the factory mount, this insert eliminates the associated slop and ensures that you're experiencing crisper shifts and a smoother driving experience.\u003c\/p\u003e\n\u003cp\u003eThis mount was thoroughly tested by 034Motorsport and independent Audi enthusiasts before release. Installation is very simple, can be performed in minutes, and is completely reversible. This upgrade is compatible with vehicles equipped with DSG (S-Tronic) and Tiptronic transmissions, providing improved shifting and increased performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eT6-6061 Billet Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eCNC-Machined In-House\u003c\/li\u003e\n\u003cli\u003eClear Anodized Finish for Durability\u003c\/li\u003e\n\u003cli\u003eEngineered to Fill Void In Factory Transmission Mount\u003c\/li\u003e\n\u003cli\u003eDrastically Reduces Transmission Movement During Shifting and Deceleration\u003c\/li\u003e\n\u003cli\u003eImproves Shifting Feel, Resulting in Crisper Shifts\u003c\/li\u003e\n\u003cli\u003eMinimal Additional NVH Transfer Inside Cabin\u003c\/li\u003e\n\u003cli\u003eEasy, Straightforward Installation Takes Minutes!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e034Motorsport Billet Aluminum Transmission Mount Insert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/store.034motorsport.com\/blog\/installation-instructions-c7-audi-a6-s6-rs6-a7-s7-rs7-transmission-mount-insert-diy-034-509-4048\/\" target=\"_blank\"\u003eWeb \u003c\/a\u003e- \u003ca href=\"https:\/\/store.034motorsport.com\/docs\/034motorsport_c7_audi_a6_s6_rs6_a7_s7_rs7_transmission_mount_insert_upgrade_diy_installation_instructions.pdf\" target=\"_blank\"\u003ePDF\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/store.034motorsport.com\/docs\/034-509-4048-product-info-sheet-improve-smoother-shifting-upgrade-transmission-mount-insert-c7-audi-a6-a7-s6-s7-rs6-rs7-20-tfsi-30-tfsi-40-tfsi-dsg-tiptronic.pdf\" target=\"_blank\"\u003eProduct Information Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\/Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A6 2012-2018 C7\/C7.5 2.0 TFSI *\u003c\/li\u003e\n\u003cli\u003eAudi A6 2012-2018 C7\/C7.5 3.0 TDI *\u003c\/li\u003e\n\u003cli\u003eAudi A6 2012-2018 C7\/C7.5 3.0 TFSI *\u003c\/li\u003e\n\u003cli\u003eAudi A6 2019-Present C8 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi A7 2012-2018 C7\/C7.5 3.0 TDI *\u003c\/li\u003e\n\u003cli\u003eAudi A7 2012-2018 C7\/C7.5 3.0 TFSI *\u003c\/li\u003e\n\u003cli\u003eAudi A7 2019-Present C8 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi A8 2011-2018 D4 3.0 TDI\u003c\/li\u003e\n\u003cli\u003eAudi A8 2011-2018 D4 3.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi A8 2011-2018 D4 4.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi Q7 2015-Present 4M\/4M.5 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi Q7 2015-2021 4M\/4M.5 3.0 TFSI Supercharged\u003c\/li\u003e\n\u003cli\u003eAudi Q7 2022-Present 4M.5 3.0 TFSI Turbocharged\u003c\/li\u003e\n\u003cli\u003eAudi Q8 2019-Present 4M8 3.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi RS6 2012-2018 C7\/C7.5 4.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi RS7 2012-2018 C7\/C7.5 4.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi S6 2012-2018 C7\/C7.5 4.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi S6 2019-Present C8 2.9 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi S7 2012-2018 C7\/C7.5 4.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi S7 2019-Present C8 2.9 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi S8 2011-2018 D4 4.0L TFSI\u003c\/li\u003e\n\u003cli\u003eVW Touareg 2018-Present CR 3.0L V6 TSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e* Tiptronic - Quattro Only\u003c\/em\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44898390016294,"sku":"034-509-4048","price":101.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-509-4048-034motorsport-billet-aluminum-transmission-mount-insert-c7-audi-a6-a7-s6-s7-rs6-rs7-20-tfsi-30-tfsi-40-tfsi-dsg-tiptronic-improved-shifting-upgrade-diy.jpg?v=1682141313"},{"product_id":"034motorsport-drivetrain-mount-insert-package-c7-audi-a6-s6-rs6-and-a7-s7-rs7-billet-aluminum","title":"034Motorsport Drivetrain Mount Insert Package, C7 Audi A6\/S6\/RS6 and A7\/S7\/RS7, Billet Aluminum","description":"\u003cp\u003e034Motorsport is proud to offer our Billet Aluminum Drivetrain Mount Insert Package for the C7 Audi A6\/S6\/RS6 and A7\/S7\/RS7! The factory Audi transmission and rear differential mounts have large voids in the rubber damping medium, which results in excessive drivetrain movement under load. This movement results in slop than can be observed when accelerating, decelerating, shifting, and launching.\u003c\/p\u003e\r\n\u003cp\u003eThese billet aluminum inserts are designed to fill the large voids in the factory transmission and rear differential mounts, and limit drivetrain movement without sacrificing ride quality or introducing any additional noise, vibration, or harshness into the cabin. By filling the voids in the factory mounts, this package eliminates the associated slop to ensure that you experience crisper shifts, harder launches, and a smoother driving experience.\u003c\/p\u003e\r\n\u003cp\u003eThis mount insert package was thoroughly tested by 034Motorsport, JH Motorsports, and independent Audi enthusiasts before release. Installation is very simple, can be performed in minutes, and is completely reversible.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003eT6-6061 Billet Aluminum Construction\u003c\/li\u003e\r\n\u003cli\u003eCNC-Machined In-House\u003c\/li\u003e\r\n\u003cli\u003eClear Anodized Finish for Durability\u003c\/li\u003e\r\n\u003cli\u003eEngineered to Fill Voids In Factory Transmission\/Differential Mounts\u003c\/li\u003e\r\n\u003cli\u003eDrastically Reduces Transmission and Differential Movement During Shifting and Deceleration\u003c\/li\u003e\r\n\u003cli\u003eImproves Shifting Feel, Resulting in Crisper Shifts\u003c\/li\u003e\r\n\u003cli\u003eAllows for Harder Launches and Better Response from Rear Differential\u003c\/li\u003e\r\n\u003cli\u003eWill Not Cause Additional NVH Transfer Inside Cabin\u003c\/li\u003e\r\n\u003cli\u003eEasy, Straightforward Installation Takes Minutes!\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e034Motorsport Billet Aluminum Transmission Mount Insert\u003c\/li\u003e\r\n\u003cli\u003e034Motorsport Billet Aluminum Rear Differential Mount Insert Pair (Front)\u003c\/li\u003e\r\n\u003cli\u003e034Motorsport Billet Aluminum Rear Differential Carrier Mount Insert Pair (Rear)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003eTransmission Mount Insert: \u003ca href=\"https:\/\/store.034motorsport.com\/blog\/installation-instructions-c7-audi-a6-s6-rs6-a7-s7-rs7-transmission-mount-insert-diy-034-509-4048\/\" target=\"_blank\"\u003eWeb\u003c\/a\u003e - \u003ca href=\"https:\/\/store.034motorsport.com\/docs\/034motorsport_c7_audi_a6_s6_rs6_a7_s7_rs7_transmission_mount_insert_upgrade_diy_installation_instructions.pdf\" target=\"_blank\"\u003ePDF\u003c\/a\u003e\n\u003c\/li\u003e\r\n\u003cli\u003eRear Differential Mount Insert (Front): \u003ca href=\"https:\/\/store.034motorsport.com\/docs\/034motorsport_b8_c7_audi_a4_s4_rs4_a5_s5_rs5_q5_sq5_a6_s6_rs6_a7_s7_rs7_quattro_rear_differential_mount_upgrade_diy_installation_instructions.pdf\" target=\"_blank\"\u003ePDF\u003c\/a\u003e\n\u003c\/li\u003e\r\n\u003cli\u003eRear Differential Carrier Mount Insert (Rear): \u003ca href=\"https:\/\/store.034motorsport.com\/docs\/034motorsport_b8_c7_audi_a4_s4_rs4_a5_s5_rs5_q5_sq5_a6_s6_rs6_a7_s7_rs7_quattro_rear_differential_carrier_mount_bushing_insert_upgrade_diy_installation_instructions.pdf\" target=\"_blank\"\u003ePDF\u003c\/a\u003e\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e2012 - Present Audi A6 (C7) - Quattro Models Only\u003c\/li\u003e\r\n\u003cli\u003e2012 - Present Audi S6 (C7)\u003c\/li\u003e\r\n\u003cli\u003e2012 - Present Audi RS6 (C7)\u003c\/li\u003e\r\n\u003cli\u003e2012 - Present Audi A7 (C7) - Quattro Models Only\u003c\/li\u003e\r\n\u003cli\u003e2012 - Present Audi S7 (C7)\u003c\/li\u003e\r\n\u003cli\u003e2012 - Present Audi RS7 (C7)\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44898390343974,"sku":"034-509-6001","price":294.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-509-6001-034motorsport-billet-drivetrain-mount-insert-upgrade-package-c7-audi-a6-s6-rs6-a7-s7-rs7.jpg?v=1682141328"},{"product_id":"034motorsport-drivetrain-mount-insert-package-b8-audi-a4-s4-rs4-a5-s5-rs5-q5-sq5-billet-aluminum","title":"034Motorsport Drivetrain Mount Insert Package, B8 Audi A4\/S4\/RS4, A5\/S5\/RS5, Q5\/SQ5 Billet Aluminum","description":"\u003cp\u003e034Motorsport is pleased to present our new Billet Aluminum Rear Differential Mount Insert Upgrade for the B8 Audi A4\/S4\/RS4, A5\/S5\/RS5, Q5\/SQ5 and C7 Audi A6\/S6\/RS6, A7\/S7\/RS7! The factory Audi rear differential mount has voids in the rubber damping medium, which results in excessive rear differential movement under load. This movement allows for unwanted drivetrain slop (and sometimes clunks) that can be observed when accelerating, decelerating, and shifting.\u003c\/p\u003e\r\n\u003cp\u003eThese billet aluminum inserts are designed to fill the voids in both sides of the front-most factory B8 Audi A4\/S4\/RS4, A5\/S5\/RS5, Q5\/SQ5 and C7 Audi A6\/S6\/RS6, A7\/S7\/RS7 rear differential mount, and limit rear differential movement without sacrificing ride quality or introducing any additional noise, vibration, or harshness into the cabin. By filling the voids in the factory mounts, these inserts eliminate the associated slop and ensures that you're experiencing smoother shifting and throttle transitions, and an improved driving experience.\u003c\/p\u003e\r\n\u003cp\u003eInstallation is very simple, can be performed in minutes, and is completely reversible. These billet aluminum inserts are precision-machined to fill voids on both sides of the factory rear differential mount, and will not pack and wear out over time.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003eCNC-Machined Billet Aluminum Construction with Clear Anodized Finish\u003c\/li\u003e\r\n\u003cli\u003eApplication-Specific Design for Optimal Fitment and Performance\u003c\/li\u003e\r\n\u003cli\u003eEngineered to Fill Voids In Both Sides of Factory Rear Differential Mount\u003c\/li\u003e\r\n\u003cli\u003eDrastically Reduces Rear Differential Movement During Shifting, Acceleration, and Deceleration\u003c\/li\u003e\r\n\u003cli\u003eImproves Shifting Feel, Resulting in Crisper Shifts\u003c\/li\u003e\r\n\u003cli\u003eWill Not Cause Additional NVH Transfer Inside Cabin\u003c\/li\u003e\r\n\u003cli\u003eEasy, Straightforward Installation Takes Minutes!\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e034Motorsport Billet Aluminum Transmission Mount Insert\u003c\/li\u003e\r\n\u003cli\u003e034Motorsport Billet Aluminum Rear Differential Mount Insert Pair (Front)\u003c\/li\u003e\r\n\u003cli\u003e034Motorsport Billet Aluminum Rear Differential Carrier Mount Insert Pair (Rear)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003eTransmission Mount Insert: \u003ca href=\"https:\/\/store.034motorsport.com\/blog\/diy-installation-instructions-034motorsport-transmission-mount-insert-b8-audi-a4s4rs4-a5s5rs5-q5sq5-034-509-4014\/\" target=\"_blank\"\u003eWeb \u003c\/a\u003e- \u003ca href=\"https:\/\/store.034motorsport.com\/docs\/034motorsport_b8_audi_a4_s4_rs4_a5_s5_rs5_transmission_mount_insert_installation_instructions.pdf\" target=\"_blank\"\u003ePDF\u003c\/a\u003e\n\u003c\/li\u003e\r\n\u003cli\u003eRear Differential Mount Insert (Front): \u003ca href=\"https:\/\/store.034motorsport.com\/docs\/034motorsport_b8_c7_audi_a4_s4_rs4_a5_s5_rs5_q5_sq5_a6_s6_rs6_a7_s7_rs7_quattro_rear_differential_mount_upgrade_diy_installation_instructions.pdf\" target=\"_blank\"\u003ePDF\u003c\/a\u003e\n\u003c\/li\u003e\r\n\u003cli\u003eRear Differential Carrier Mount Insert (Rear): \u003ca href=\"https:\/\/store.034motorsport.com\/docs\/034motorsport_b8_c7_audi_a4_s4_rs4_a5_s5_rs5_q5_sq5_a6_s6_rs6_a7_s7_rs7_quattro_rear_differential_carrier_mount_bushing_insert_upgrade_diy_installation_instructions.pdf\" target=\"_blank\"\u003ePDF\u003c\/a\u003e\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e2009 - 2016 Audi A4 (B8\/B8.5) Quattro Models Only\u003c\/li\u003e\r\n\u003cli\u003e2010 - 2017 Audi S4 (B8\/B8.5)\u003c\/li\u003e\r\n\u003cli\u003e2013 - 2017 Audi RS4 (B8\/B8.5)\u003c\/li\u003e\r\n\u003cli\u003e2008 - 2017 Audi A5 (B8\/B8.5) Quattro Models Only\u003c\/li\u003e\r\n\u003cli\u003e2008 - 2017 Audi S5 (B8\/B8.5)\u003c\/li\u003e\r\n\u003cli\u003e2013 - 2017 Audi RS5 (B8\/B8.5)\u003c\/li\u003e\r\n\u003cli\u003e2008 - 2017 Audi Q5\/SQ5 (B8\/B8.5)\u003c\/li\u003e\r\n\u003cli\u003e2010 - Present Audi A8 (D4) Quattro Models Only\u003c\/li\u003e\r\n\u003cli\u003e2012 - Present Audi S8 (D4)\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44898390376742,"sku":"034-509-6000","price":294.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-509-6000-034motorsport-billet-drivetrain-mount-insert-upgrade-package-b8-b85-audi-a4-s4-rs4-a5-s5-rs5-q5-sq5.jpg?v=1682141333"},{"product_id":"034motorsport-billet-aluminum-rear-differential-mount-upgrade-b8-audi-a4-s4-rs4-a5-s5-rs5-q5-sq5-and-c7-audi-a6-s6-rs6-a7-s7-rs7","title":"034Motorsport Billet Aluminum Rear Differential Mount Upgrade, B8 Audi A4\/S4\/RS4, A5\/S5\/RS5, Q5\/SQ5 and C7 Audi A6\/S6\/RS6, A7\/S7\/RS7","description":"\u003cp\u003e034Motorsport is pleased to present our new Billet Aluminum Rear Differential Mount Insert Upgrade for the B8 Audi A4\/S4\/RS4, A5\/S5\/RS5, Q5\/SQ5 and C7 Audi A6\/S6\/RS6, A7\/S7\/RS7! The factory Audi rear differential mount has voids in the rubber damping medium, which results in excessive rear differential movement under load. This movement allows for unwanted drivetrain slop (and sometimes clunks) that can be observed when accelerating, decelerating, and shifting.\u003c\/p\u003e\r\n\u003cp\u003eThese billet aluminum inserts are designed to fill the voids in both sides of the front-most factory B8 Audi A4\/S4\/RS4, A5\/S5\/RS5, Q5\/SQ5 and C7 Audi A6\/S6\/RS6, A7\/S7\/RS7 rear differential mount, and limit rear differential movement without sacrificing ride quality or introducing any additional noise, vibration, or harshness into the cabin. By filling the voids in the factory mounts, these inserts eliminate the associated slop and ensures that you're experiencing smoother shifting and throttle transitions, and an improved driving experience.\u003c\/p\u003e\r\n\u003cp\u003eInstallation is very simple, can be performed in minutes, and is completely reversible. These billet aluminum inserts are precision-machined to fill voids on both sides of the factory rear differential mount, and will not pack and wear out over time.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003eCNC-Machined Billet Aluminum Construction with Clear Anodized Finish\u003c\/li\u003e\r\n\u003cli\u003eApplication-Specific Design for Optimal Fitment and Performance\u003c\/li\u003e\r\n\u003cli\u003eEngineered to Fill Voids In Both Sides of Factory Rear Differential Mount\u003c\/li\u003e\r\n\u003cli\u003eDrastically Reduces Rear Differential Movement During Shifting, Acceleration, and Deceleration\u003c\/li\u003e\r\n\u003cli\u003eImproves Shifting Feel, Resulting in Crisper Shifts\u003c\/li\u003e\r\n\u003cli\u003eWill Not Cause Additional NVH Transfer Inside Cabin\u003c\/li\u003e\r\n\u003cli\u003eEasy, Straightforward Installation Takes Minutes!\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e034Motorsport Billet Aluminum Rear Differential Mount Upgrade (Top Insert | 505-2017)\u003c\/li\u003e\r\n\u003cli\u003e034Motorsport Billet Aluminum Rear Differential Mount Upgrade (Bottom Insert | 505-2018)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e\u003ca href=\"https:\/\/store.034motorsport.com\/docs\/034motorsport_b8_c7_audi_a4_s4_rs4_a5_s5_rs5_q5_sq5_a6_s6_rs6_a7_s7_rs7_quattro_rear_differential_mount_upgrade_diy_installation_instructions.pdf\" target=\"_blank\"\u003ePDF\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003ca href=\"https:\/\/store.034motorsport.com\/docs\/034-505-2019-product-information-sheet-b8-c7-audi-a4-s4-rs4-a5-s5-rs5-q5-sq5-a6-s6-rs6-a7-s7-rs7-rear-diff-mount-upgrade.pdf\" target=\"_blank\"\u003eProduct Information Sheet\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e2009 - 2016 Audi A4 (B8) Quattro Models Only\u003c\/li\u003e\r\n\u003cli\u003e2010 - 2017 Audi S4 (B8)\u003c\/li\u003e\r\n\u003cli\u003e2013 - 2017 Audi RS4 (B8)\u003c\/li\u003e\r\n\u003cli\u003e2008 - 2017 Audi A5 (B8) Quattro Models Only\u003c\/li\u003e\r\n\u003cli\u003e2008 - 2017 Audi S5 (B8)\u003c\/li\u003e\r\n\u003cli\u003e2013 - 2017 Audi RS5 (B8)\u003c\/li\u003e\r\n\u003cli\u003e2008 - 2017 Audi Q5\/SQ5 (B8)\u003c\/li\u003e\r\n\u003cli\u003e2012 - 2017 Audi A6 (C7) Quattro Models Only\u003c\/li\u003e\r\n\u003cli\u003e2012 - 2017 Audi S6 (C7)\u003c\/li\u003e\r\n\u003cli\u003e2012 - 2017 Audi RS6 (C7)\u003c\/li\u003e\r\n\u003cli\u003e2012 - 2017 Audi A7 (C7) Quattro Models Only\u003c\/li\u003e\r\n\u003cli\u003e2012 - 2017 Audi S7 (C7)\u003c\/li\u003e\r\n\u003cli\u003e2012 - 2017 Audi RS7 (C7)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstalls Into:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e8K0 599 381H \/ 8K0599381H\u003c\/li\u003e\r\n\u003cli\u003e8K0 599 381J \/ 8K0599381J\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44898390409510,"sku":"034-505-2019","price":117.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-505-2019-034motorsport-b8-c7-audi-a4-s4-rs4-a5-s5-rs5-q5-sq5-a6-s6-rs6-a7-s7-rs7-quattro-front-differential-mount-upgrade-kit.jpg?v=1682141339"},{"product_id":"034motorsport-billet-aluminum-rear-differential-carrier-mount-insert-kit-b8-audi-a4-s4-rs4-a5-s5-rs5-q5-sq5-and-c7-audi-a6-s6-rs6-a7-s7-rs7","title":"034Motorsport Billet Aluminum Rear Differential Carrier Mount Insert Kit, B8 Audi A4\/S4\/RS4, A5\/S5\/RS5, Q5\/SQ5 and C7 Audi A6\/S6\/RS6, A7\/S7\/RS7","description":"\u003cp\u003e034Motorsport is pleased to present our new Billet Aluminum Rear Differential Carrier Mount Insert Upgrade for the B8 Audi A4\/S4\/RS4, A5\/S5\/RS5, Q5\/SQ5 and C7 Audi A6\/S6\/RS6, A7\/S7\/RS7, as well as the D4 Audi A8\/S8! The factory Audi rear differential carrier bushings have voids in the rubber damping medium, which results in excessive rear differential movement (twisting) under load. This movement allows for unwanted drivetrain slop (and sometimes clunks) that can be observed when accelerating, decelerating, and shifting.\u003c\/p\u003e\r\n\u003cp\u003eThese billet aluminum inserts are designed to fill the voids in the factory B8 Audi A4\/S4\/RS4, A5\/S5\/RS5, Q5\/SQ5 and C7 Audi A6\/S6\/RS6, A7\/S7\/RS7 rear differential carrier mounts, and limit rear differential movement without sacrificing ride quality or introducing any additional noise, vibration, or harshness into the cabin. By filling the voids in the factory mounts, these inserts eliminate the associated slop and ensures that you're experiencing smoother shifting and throttle transitions, and an improved driving experience.\u003c\/p\u003e\r\n\u003cp\u003eInstallation is very simple, can be performed in minutes, and is completely reversible.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eCNC-Machined Billet Aluminum Construction with Clear Anodized Finish\u003cbr\u003eApplication-Specific Design for Optimal Fitment and Performance\u003cbr\u003eEngineered to Fill Voids In Factory Rear Differential Mounts\u003cbr\u003eDrastically Reduces Rear Differential Movement During Shifting, Acceleration, and Deceleration\u003cbr\u003eImproves Shifting Feel, Resulting in Crisper Shifts\u003cbr\u003eWill Not Cause Additional NVH Transfer Inside Cabin\u003cbr\u003eEasy, Straightforward Installation Takes Minutes!\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e034Motorsport Billet Aluminum Rear Differential Carrier Mount Insert Pair\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eWeb - PDF\u003cbr\u003eProduct Information Sheet\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e2009 - 2016 Audi A4 (B8) Quattro Models Only\u003c\/li\u003e\r\n\u003cli\u003e2010 - 2017 Audi S4 (B8)\u003c\/li\u003e\r\n\u003cli\u003e2013 - 2017 Audi RS4 (B8)\u003c\/li\u003e\r\n\u003cli\u003e2008 - 2017 Audi A5 (B8) Quattro Models Only\u003c\/li\u003e\r\n\u003cli\u003e2008 - 2017 Audi S5 (B8)\u003c\/li\u003e\r\n\u003cli\u003e2013 - 2017 Audi RS5 (B8)\u003c\/li\u003e\r\n\u003cli\u003e2008 - 2017 Audi Q5\/SQ5 (B8)\u003c\/li\u003e\r\n\u003cli\u003e2012 - 2017 Audi A6 (C7) Quattro Models Only\u003c\/li\u003e\r\n\u003cli\u003e2012 - 2017 Audi S6 (C7)\u003c\/li\u003e\r\n\u003cli\u003e2012 - 2017 Audi RS6 (C7)\u003c\/li\u003e\r\n\u003cli\u003e2012 - 2017 Audi A7 (C7) Quattro Models Only\u003c\/li\u003e\r\n\u003cli\u003e2012 - 2017 Audi S7 (C7)\u003c\/li\u003e\r\n\u003cli\u003e2012 - 2017 Audi RS7 (C7)\u003c\/li\u003e\r\n\u003cli\u003e2010 - 2017 Audi A8 (D4) Quattro Models Only\u003c\/li\u003e\r\n\u003cli\u003e2012 - 2017 Audi S8 (D4)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstalls Into:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e8K0 599 257N \/ 8K0599257N\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44898390475046,"sku":"034-505-2016","price":134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-505-2016-034motorsport-b8-c7-audi-a4-s4-rs4-a5-s5-rs5-q5-sq5-a6-s6-rs6-a7-s7-rs7-rear-differential-carrier-mount-upgrade-insert-kit.jpg?v=1682141347"},{"product_id":"034-motorsport-billet-aluminum-rear-diff-mount-inserts-for-b9-audi-a4-s4-and-allroad","title":"034 Motorsport Billet Aluminum Rear Diff Mount Inserts for B9 Audi A4\/S4, A5\/S5\/RS5 and Allroad","description":"\u003cp\u003eThe 034Motorsport Billet Aluminum Rear Differential Mount Insert Kit for B9 Audi A4\/S4 and Allroad is designed to limit movement in the factory rear differential mounts to maintain proper suspension geometry when cornering, and improve the responsiveness of the rear suspension and differential.\u003c\/p\u003e\n\u003cp\u003eThe B9 Audi A4\/S4 and Allroad uses rubber rear differential mounts which deflect under load, causing the rear end to feel vague and loose, as well as leading to less-than-optimal handling characteristics during on-throttle and off-throttle transitions. These precision-machined billet aluminum inserts are designed to fill voids in the factory rear differential mounts, and limit differential movement under load without sacrificing ride quality or introducing any perceivable additional noise, vibration, or harshness into the cabin. The result is a more refined, connected driving experience.\u003c\/p\u003e\n\u003cp\u003eDesigned to work in conjunction with the factory rubber mounts, this insert package was engineered using CAD software and thoroughly tested and refined to provide a significant improvement in handling performance and feel.\u003c\/p\u003e\n\u003cp\u003eThese inserts were tested extensively on 034Motorsport's in-house B9 Audi A4 Development Vehicle before release. Installation is very simple and is completely reversible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplacement Hardware Kit\u003cbr\u003e\u003c\/strong\u003eThere are three stretch bolts that should be replaced when installing this kit. \u003cstrong\u003e\u003ca href=\"\/products\/audi-b9-b9-5-rear-differential-mount-hardware-kit\" target=\"_blank\" title=\"Audi B9\/B9.5 Rear Differential Mount Hardware Kit\" rel=\"noopener\"\u003eWe've assembled a kit that includes them\u003c\/a\u003e\u003c\/strong\u003e (available as an option above).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eT6-6061 Billet Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eCNC-Machined In-House\u003c\/li\u003e\n\u003cli\u003eClear Anodized Finish for Durability\u003c\/li\u003e\n\u003cli\u003eEngineered to Fill Voids In Factory Rear Differential Mounts\u003c\/li\u003e\n\u003cli\u003eReduces Rear Differential Movement During Launches and Acceleration\u003c\/li\u003e\n\u003cli\u003eImproves Shifting Feel, Resulting in Crisper Shifts\u003c\/li\u003e\n\u003cli\u003eVirtually No Additional NVH Transfer Inside Cabin\u003c\/li\u003e\n\u003cli\u003eEasy, Straightforward Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e034Motorsport Billet Aluminum B9 Audi Rear Differential Mount Insert - Rear (2)\u003c\/li\u003e\n\u003cli\u003e034Motorsport Billet Aluminum B9 Audi Rear Differential Mount Insert - Front (1)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e2017 - Present Audi A4 (B9)\u003c\/li\u003e\n\u003cli\u003e2018 - Present Audi A5 (B9)\u003c\/li\u003e\n\u003cli\u003e2018 - Present Audi S4 (B9)\u003c\/li\u003e\n\u003cli\u003e2018 - Present Audi S5 (B9)\u003c\/li\u003e\n\u003cli\u003e2017 - Present Audi Allroad (B9)\u003c\/li\u003e\n\u003cli\u003e2018 - Present Audi RS5 (B9)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"034Motorsport Audi B9\/B9.5 Billet Aluminum Rear Diff Mount Inserts Installation Instructions\" href=\"https:\/\/www.034motorsport.com\/docs\/034-505-2020_Install_Instructions.pdf\" target=\"_blank\"\u003e\u003cstrong\u003ePlease click or tap here\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"No  Hardware Kit","offer_id":50430451974438,"sku":"034-505-2020","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Yes Add New Genuine Hardware Kit","offer_id":50430452007206,"sku":"034-505-2020+B9-R-DIFF-HW-KIT","price":169.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-505-2020-034motorsport-billet-aluminum-rear-diff-mount-insert-b9-audi-a4-s4-a5-s5-allroad.jpg?v=1682141546"},{"product_id":"apr-billet-stainless-steel-dogbone-mount-insert-vw-mk7-golf-gti-golf-r-audi-8v-a3-s3-rs3-8s-tt-tts-ttrs","title":"APR Billet Stainless-Steel Dogbone Mount Insert - Version 1, Early MQB Models","description":"\u003cp\u003e\u003cstrong\u003eThis listing is for the Version 1 insert. If you need the Version 2 insert, \u003ca title=\"APR Billet Dogbone Insert - Version 2\" href=\"\/products\/apr-billet-stainless-steel-dogbone-mount-insert-version-2-late-mqb-models.html\" target=\"_self\"\u003eplease click or tap here\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe APR Billet Stainless-Steel Dogbone \/ Subframe Mount Insert limits driveline movement, which helps to minimize wheel-hop and torque steer. This provides a more direct driving experience by eliminating slop in the driveline and does so without introducing excessive or uncomfortable driveline vibration and noise.\u003c\/p\u003e\n\u003cp\u003eThe APR insert is created from thick, billet, stainless-steel. All mounts will slightly deform under use, but unlike all other units created from rubber, polyurethane, and even billet-aluminum, the APR unit will not heavily deform to the point of failure. Rest assured this simple upgrade will last the test of time, unlike others, and packs a limited lifetime warranty against cracking! \u003c\/p\u003e\n\u003cp\u003eWe offer the mount in two different configurations depending on the style of your factory mount. Be sure to check your subframe mount before purchase, and remember to always replace your factory 1-time use subframe bolt!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e2015+ VW Mk7 Golf, GTI, Golf R\u003c\/li\u003e\n\u003cli\u003e2015+ VW Mk7 Golf Sportwagen\u003c\/li\u003e\n\u003cli\u003e2015+ Audi 8V A3, S3\u003c\/li\u003e\n\u003cli\u003e2015+ Audi 8S TT, TTS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTwo different versions are available, please check yours before ordering!\u003c\/strong\u003e\u003c\/p\u003e","brand":"APR","offers":[{"title":"Default Title","offer_id":44898403844390,"sku":"MS100141","price":87.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/apr-mqb-mk7-torque-arm-insert-ms100141.jpg?v=1682141845"},{"product_id":"apr-pendulum-mount-vw-mk7-golf-gti-golf-r-sportwagen-audi-8v-a3-s3-8s-tt-tts","title":"APR Pendulum Mount - VW Mk8, Mk7 Golf, GTI, Golf R, Sportwagen, Audi 8V A3, S3, 8S TT, TTS","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAPR is pleased to present the ultimate Pendulum Mount Upgrade!\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe APR Pendulum mount replaces the factory mount with a new, thick, billet-aluminum and billet-stainless-steel two-piece design, featuring a PTFE-lined spherical bearing and new bolts. The system stiffens the driveline to improve shift quality and power transition. It is easy to install, addresses all concerns with the factory setup and includes all necessary hardware to bolt on and enjoy!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eQuick Facts:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eReduces transmission movement\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBy removing the factory rubber bushing, the APR system reduces slop in the driveline to improve shifts, and transmission of power to the ground. Expect a sportier feel during acceleration, deceleration and gear changes without an excessive increase in NVH when paired with the factory sub-frame mount.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eSpherical bearing\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpherical bearings offer far less unwanted movement over rubber and polyurethane inserts. As such, the APR mount uses a spherical bearing, made possible by upgrading the rear mounting hardware. The bearing is fully-serviceable, features a heat-treated race and precision-ground ball, with a self-sealing and self-lubricating PTFE lining.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBillet-aluminum and Billet-stainless-steel construction\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe front and rear pieces replace the factory cast aluminum and stamped steel pieces with precisely machined, billet-aluminum and billet-stainless-steel pieces that are strong. The aluminum piece is anodized black and the stainless piece is electropolished to provide corrosion resistance and the APR logo is laser etched on each side.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eReplacement Bolts\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe factory bolts are one-time-use, and must be replaced when installing a new mount. The APR system includes non-one-time-use bolts for their strength, quality and longevity over the factory bolts.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eEasy to install \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe system is easy to install, doesn’t require dropping the sub-frame and is compatible with the factory and factory-like modified sub-frame mounts. Full install directions are included with each system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e2022-2024 VW Mk8 GTI, Golf R With Manual Transmission\u003c\/li\u003e\n\u003cli\u003e2015+ VW Mk7 Golf, GTI, Golf R\u003c\/li\u003e\n\u003cli\u003e2017+ VW Mk7 Golf Sportwagen, Alltrack\u003c\/li\u003e\n\u003cli\u003e2015+ Audi 8V A3, S3\u003c\/li\u003e\n\u003cli\u003e2015+ Audi 8S TT, TTS\u003c\/li\u003e\n\u003cli\u003e2015+ VW B7 Passat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePlease note: Fits 6 speed manual or DSG models only.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"APR","offers":[{"title":"Default Title","offer_id":44898403877158,"sku":"MS100140","price":357.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/apr-pendulum-mount-ms100140_001.jpg?v=1682141852"},{"product_id":"street-density-transmission-mount-upgrade-b8-b8-5-b9-audi-a4-s4-rs4-a5-s5-rs5-q5-sq5","title":"034Motorsport Street Density Transmission Mount Upgrade, B8\/B8.5\/B9 AUDI A4\/S4\/RS4, A5\/S5\/RS5, Q5\/SQ5","description":"\u003cp\u003e034Motorsport is proud to offer our Street Density Transmission Mount Upgrade for the B8\/B8.5 Audi A4\/S4\/RS4 and A5\/S5\/RS5 and B9 Audi A4\/S4\/Allroad and Q5\/SQ5! The factory Audi transmission mount assembly features a soft rubber damping medium, which allows for excessive transmission movement at increased power levels, and can break down over time. This movement can be observed as hesitation or lurching when accelerating, decelerating, and shifting.\u003c\/p\u003e\n\u003cp\u003eThis high durometer performance mount upgrade is designed to be a direct, drop-in replacement for the factory damping medium, and limit unwanted transmission movement. By reducing slop, this upgrade ensures that you're experiencing crisper shifts and a more connected driving experience. This upgrade will introduce some additional, perceivable increase in noise and vibration transfer into the cabin, especially on vehicles equipped with the Tiptronic transmission.\u003c\/p\u003e\n\u003cp\u003eIn addition, the factory transmission mount assembly components are not available separately from dealerships, and premature failure of this mount can result in having to buy the entire assembly. The Street Density Transmission Mount Upgrade from 034Motorsport lets you reuse the factory cast portion when replacing\/upgrading the stock mount.\u003c\/p\u003e\n\u003cp\u003eThis mount was thoroughly tested by 034Motorsport, and independent Audi enthusiasts before release. Installation is very straightforward, and is completely reversible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eManufactured from 65 Durometer Rubber\u003c\/li\u003e\n\u003cli\u003eDesigned to Upgrade Factory Transmission Mount Assembly\u003c\/li\u003e\n\u003cli\u003eEngineered to Work in Conjunction with the 034Motorsport B8\/B8.5 and B9 Audi Transmission Mount Insert\u003c\/li\u003e\n\u003cli\u003eFurther Reduces Transmission Movement During Shifting, Acceleration, and Deceleration\u003c\/li\u003e\n\u003cli\u003eImproves Shifting Feel and Throttle Response\u003c\/li\u003e\n\u003cli\u003eWill Introduce Some Increase in Noise and Vibration Transfer Inside Cabin, Especially on Tiptronic Cars \u003c\/li\u003e\n\u003cli\u003eStraightforward, Fully-Reversible Installation!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e034Motorsport Street Density B8\/B8.5\/B9 Audi A4\/S4\/RS4, A5\/S5\/RS5, Q5\/SQ5 Transmission Mount Upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/store.034motorsport.com\/docs\/034motorsport-b8-audi-a4-s4-rs4-a5-s5-rs5-q5-sq5-transmission-mount-upgrade-replacement-installation-guide-diy-034-509-4025.pdf\" target=\"_blank\"\u003eClick or tap here\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2009 - 2016 Audi A4 (B8\/B8.5)\n\u003cul\u003e\n\u003cli\u003eAll Transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e2010 - 2017 Audi S4 (B8\/B8.5)\n\u003cul\u003e\n\u003cli\u003eAll Transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e2013 - 2017 Audi RS4 (B8\/B8.5)\n\u003cul\u003e\n\u003cli\u003eAll Transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e2008 - 2017 Audi A5 (B8\/B8.5)\n\u003cul\u003e\n\u003cli\u003eAll Transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e2008 - 2017 Audi S5 (B8\/B8.5) \n\u003cul\u003e\n\u003cli\u003eAll Transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e2013 - 2017 Audi RS5 (B8\/B8.5)\n\u003cul\u003e\n\u003cli\u003eAll Transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAudi \/ RS5 \/ B9\/B9.5 \/ 2.9 TFSI \/ 2018-Present\n\u003cul\u003e\n\u003cli\u003eAll Transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e2008 - 2017 Audi Q5\/SQ5 (B8\/B8.5)\n\u003cul\u003e\n\u003cli\u003eAll Transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e2017 - Present Audi A4\/Allroad (B9)\n\u003cul\u003e\n\u003cli\u003e7-Speed DCT Transmission\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e2018 - Present Audi S4 (B9)\n\u003cul\u003e\n\u003cli\u003e8-Speed Automatic Transmission\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e2018 - Present Audi Q5 (B9)\n\u003cul\u003e\n\u003cli\u003e7-Speed DCT Transmission\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e2018 - Present Audi SQ5 (B9)\n\u003cul\u003e\n\u003cli\u003e8-Speed Automatic Transmission\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstalls Into:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e8K0 399 151DB \/ 8K0399151DB\u003c\/li\u003e\n\u003cli\u003e8K0 399 151CD \/ 8K0399151CD\u003c\/li\u003e\n\u003cli\u003e8K0 399 151BF \/ 8K0399151BF\u003c\/li\u003e\n\u003cli\u003e8W0 399 156AR \/ 8W0399156AR\u003c\/li\u003e\n\u003cli\u003e8W0 399 156AQ \/ 8W0399156AQ\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44898406039846,"sku":"034-509-4025","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-509-4025-034motorsport-density-line-b8-audi-a4-s4-rs4-a5-s5-rs5-q5-sq5-transmission-mount-upgrade-stage2.jpg?v=1682141926"},{"product_id":"haldex-driveshaft-coupler-damper-guibo-febi-bilstein","title":"Haldex Front Driveshaft Coupler \/ Damper (Guibo) - Febi Bilstein","description":"\u003cp\u003eThis coupler connects the drive-shaft of your vehicle to the transfer case (also known as a bevel box) on your transmission. The rubber portion acts as a damper to prevent unwanted noise and vibration from being transmitted into the cabin of your vehicle. Over time, this rubber tends to dry out and break down, which can lead to unwanted harshness being felt. Repeated, high RPM launches can also cause pre-mature wear of this part as well.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePlease note: There are two driveshaft couplings on the driveshaft assembly, this one installs on the front.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eWe recommend examining the coupler on your vehicle at least once a year, or more often if the vehicle is driven hard on a regular basis. Launching your vehicle hard will increase wear on this part.\u003c\/p\u003e\n\u003cp\u003eHigh quality Febi-Bilstein brand part.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFitment\/Applications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e1999-2006 Audi 8N TT Mk1 1.8T, 3.2L Quattro\u003c\/li\u003e\n\u003cli\u003e2006-2014 Audi 8J TT Mk2 2.0T, 3.2L Quattro\u003c\/li\u003e\n\u003cli\u003e2009-2014 Audi 8J TT-S 2.0T Quattro\u003c\/li\u003e\n\u003cli\u003e2016-2023 Audi 8S TT\u003c\/li\u003e\n\u003cli\u003e2016-2023 Audi 8S TTS\u003c\/li\u003e\n\u003cli\u003e2017-2023 Audi 8S TTRS\u003c\/li\u003e\n\u003cli\u003e2006-2014 Audi 8P A3 2.0T, 3.2L Quattro\u003c\/li\u003e\n\u003cli\u003e2015-2020 Audi 8V A3 Quattro\u003c\/li\u003e\n\u003cli\u003e2015-2020 Audi 8V S3\u003c\/li\u003e\n\u003cli\u003e2017-2020 Audi 8V RS3\u003c\/li\u003e\n\u003cli\u003e2004 VW Mk4 R32\u003c\/li\u003e\n\u003cli\u003e2008 VW Mk5 R32\u003c\/li\u003e\n\u003cli\u003e2006-2008 VW B6 Passat 3.6L 4Motion\u003c\/li\u003e\n\u003cli\u003e2009-2015 VW B6 CC 3.6L 4Motion\u003c\/li\u003e\n\u003cli\u003e2015-2020 VW Mk7\/Mk7.5 Golf R\u003c\/li\u003e\n\u003cli\u003e2017-2019 VW Mk7\/Mk7.5 Golf Sportwagen\u003c\/li\u003e\n\u003cli\u003e2017-2019 VW Mk7\/Mk7.5 Golf Alltrack\u003c\/li\u003e\n\u003cli\u003e2019-2023 VW Arteon\u003c\/li\u003e\n\u003cli\u003e2018-2024 VW Tiguan 4Motion\u003c\/li\u003e\n\u003cli\u003e2020-2025 VW Atlas Cross Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFactory part number: 1J0521127A, 5Q0521127\u003c\/p\u003e","brand":"Febi Bilstein","offers":[{"title":"Default Title","offer_id":44898427437350,"sku":"1J0521127A","price":115.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/1j0521127a.jpg?v=1682143406"},{"product_id":"034motorsport-billet-aluminum-mqb-upper-dogbone-mount-insert-mk7-volkswagen-golf-gti-r-8v-8v-5-audi-a3-s3-rs3-mkiii-tt-tts-ttrs","title":"034Motorsport Billet Aluminum MQB Upper Dogbone Mount Insert VW Mk8, MK7 Golf\/GTI\/R\/Jetta\/GLI, 8V\/8V.5 Audi A3\/S3\/RS3 and MKIII TT\/TTS\/TTRS","description":"\u003cp\u003eThe 034Motorsport MQB Upper Dogbone Mount Insert (patent pending) is required for any MQB platform Mk8, Mk7, Mk7.5 Volkswagen Golf\/GTI\/R, 8V\/8V.5 Audi A3\/S3\/RS3 and MkIII Audi TT\/TTS\/TTRS using an aftermarket dogbone mount and dogbone mount insert. Aggressive driving that causes violent drivetrain movement, such as burn-outs that induce wheel-hop, will cause the upper and lower dogbone mounts to exert a bending moment on the dogbone mount arm, causing it to bend, and in some cases fail. When this failure occurs, the bottom of the engine is unconstrained and the engine will cause damage to other components in the engine bay. The 034Motorsport MQB Upper Dogbone Mount Insert eliminates these bending forces, allowing the dogbone mount to perform as designed during these violent events.\u003c\/p\u003e\r\n\u003cp\u003eAn aftermarket billet spherical dogbone mount combined with a dogbone mount insert dramatically improves the feel and responsiveness of the drivetrain during spirited driving. However, this combination of modifications, coupled with the design constraints of the MQB dogbone mount pucks, have revealed a scenario that applies forces to the dogbone mount arm that it was not designed for.\u003c\/p\u003e\r\n\u003cp\u003eThe lower dogbone mount insert limits compliance of the lower dogbone mount puck by filling large voids in the puck. During normal and spirited driving, this reduction in compliance results in more direct transitional response of the drivetrain to accelerative and decelerative forces. The driver feels more direct throttle response through the drivetrain without introducing a significant amount of NVH.\u003c\/p\u003e\r\n\u003cp\u003eHowever, violent drivetrain shocks, such as burn-out induced wheel-hop, introduce additional forces that can cause damage to the billet spherical dogbone mount arm. In these violent events, the lower puck motion is limited by the dogbone insert, but the upper puck in unconstrained and is free to move forward.\u003c\/p\u003e\r\n\u003cp\u003eThis means that the entire puck assembly rotates forward at an angle towards the front of the car. Because the dogbone mount arm is clamped into the puck assembly, the rotation of the puck assembly generates a bending moment applied to the dogbone mount arm that it was not designed for.\u003c\/p\u003e\r\n\u003cp\u003eOur testing has shown that regardless of arm design and the material used, the arm cannot be made strong enough to withstand this bending moment. We tested arms manufactured using 6061 aluminum, 7075 aluminum, and stainless steel. The results were all very similar. The dogbone mount arm showed signs of bending with just two burn-out induced wheel-hop events. Complete failure of the dogbone arm occurred in as few as four wheel-hop events. We have high confidence that other brands spherical dogbone mounts will have similar failures.\u003c\/p\u003e\r\n\u003cp\u003eThis testing revealed the cause of the bending, and our engineering team developed the 034Motorsport Billet Upper Dogbone Mount Insert to solve the issue. This insert slips into the front void of the upper dogbone mount puck, limiting the forward motion of the upper puck to match the limited forward motion of the lower puck with the lower insert installed. The result is an upper and lower insert package that eliminates the rotation inside the puck assembly during extreme drivetrain shocks, and keeps the forces acting on the dogbone arm in the direction the arm was designed for. Subsequent testing showed no signs of bending or stress in the dogbone mount arm with both the upper and lower dogbone mount inserts installed. Watch the demonstration video below to see how the dogbone mount pucks move with just the lower insert, and the upper and lower insert combined.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFitment\/Applications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e2015+ Audi A3 1.8T\/2.0T\u003c\/li\u003e\r\n\u003cli\u003e2018+ Audi 8V RS3 2.5T\u003c\/li\u003e\r\n\u003cli\u003e2015+ Audi 8V S3 2.0T\u003c\/li\u003e\r\n\u003cli\u003e2016+ Audi 8S TT 2.0T\u003c\/li\u003e\r\n\u003cli\u003e2016+ Audi 8S TTS 2.0T\u003c\/li\u003e\r\n\u003cli\u003e2018+ Audi 8S TTRS 2.5T\u003c\/li\u003e\r\n\u003cli\u003e2015+ VW Mk7 Golf\u003c\/li\u003e\r\n\u003cli\u003e2015+ VW Mk7 GTI 2.0T\u003c\/li\u003e\r\n\u003cli\u003e2015-2016 VW Mk7 Golf R 2.0T\u003c\/li\u003e\r\n\u003cli\u003e2019+ VW Mk7 Jetta, GLI\u003c\/li\u003e\r\n\u003cli\u003e2022+ VW Mk8 GTI, Golf R\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation Guide:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e\u003ca href=\"https:\/\/store.034motorsport.com\/docs\/034motorsport-billet-plus-spherical-dogbone-mount-8s-audi-ttrs-8v-rs3-034-509-1026-diy-install-guide.pdf\" target=\"_blank\"\u003e8S Audi TT RS and 8V\/8V.5 Audi RS3\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003ca href=\"https:\/\/store.034motorsport.com\/docs\/034motorsport-billet-plus-spherical-dogbone-mount-8v-8s-audi-a3-s3-tt-tts-mk7-volkswagen-gti-golf-r-034-509-1031-diy-install-guide.pdf\" target=\"_blank\"\u003eMk8, Mk7, Mk7.5 Volkswagen Golf\/GTI\/R\/Jetta\/GLI and 8V Audi A3\/S3\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44898432287014,"sku":"034-509-1035","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-509-1035-1_1.jpg?v=1682143643"},{"product_id":"apr-spherical-pendulum-mount-vw-mk7-5-audi-8v-s3-8s-tts-with-dq381-dsg-transmission-ms100180","title":"APR Spherical Pendulum Mount - VW Mk8, Mk7.5, Audi 8V\/8Y S3, 8S TTS With DQ381 DSG Transmission","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003eIn stock and ready to ship!\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPR is pleased to present the ultimate Pendulum Mount Upgrade!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe APR Pendulum mount replaces the factory mount with a new, thick, billet-aluminum and billet-stainless-steel two-piece design, featuring a PTFE-lined spherical bearing and new bolts. The system stiffens the driveline to improve shift quality and power transition. It is easy to install, addresses all concerns with the factory setup and includes all necessary hardware to bolt on and enjoy!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick Facts:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eReduces transmission movement\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eBy removing the factory rubber bushing, the APR system reduces slop in the driveline to improve shifts, and transmission of power to the ground. Expect a sportier feel during acceleration, deceleration and gear changes without an excessive increase in NVH when paired with the factory sub-frame mount.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpherical bearing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eSpherical bearings offer far less unwanted movement over rubber and polyurethane inserts. As such, the APR mount uses a spherical bearing, made possible by upgrading the rear mounting hardware. The bearing is fully-serviceable, features a heat-treated race and precision-ground ball, with a self-sealing and self-lubricating PTFE lining.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBillet-aluminum and Billet-stainless-steel construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eThe front and rear pieces replace the factory cast aluminum and stamped steel pieces with precisely machined, billet-aluminum and billet-stainless-steel pieces that are strong. The aluminum piece is anodized black and the stainless piece is electropolished to provide corrosion resistance and the APR logo is laser etched on each side.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eReplacement Bolts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eThe factory bolts are one-time-use, and must be replaced when installing a new mount. The APR system includes non-one-time-use bolts for their strength, quality and longevity over the factory bolts.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eEasy to install \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eThe system is easy to install, doesn’t require dropping the sub-frame and is compatible with the factory and factory-like modified sub-frame mounts. Full install directions are included with each system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\/Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e2022+ VW Mk8 Golf R With DSG Transmission\u003c\/li\u003e\n\u003cli\u003e2022+ VW Mk8 GTI With DSG Transmission\u003c\/li\u003e\n\u003cli\u003e2018+ VW Mk7.5 Golf R With DSG Transmission\u003c\/li\u003e\n\u003cli\u003e2019+ VW Mk7.5 GTI With DSG Transmission\u003c\/li\u003e\n\u003cli\u003e2019+ VW Mk7 GLI With DSG Transmission\u003c\/li\u003e\n\u003cli\u003e2022+ Audi 8Y S3\u003c\/li\u003e\n\u003cli\u003e2018+ Audi 8V S3 With DSG Transmission\u003c\/li\u003e\n\u003cli\u003e2018+ Audi 8S TTS With DSG Transmission\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"APR","offers":[{"title":"Default Title","offer_id":44898433138982,"sku":"MS100180","price":357.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/apr-spherical-pendulum-ms100181_001.jpg?v=1682143668"},{"product_id":"bfi-audi-ttrs-complete-replacement-transmission-mount-stage-1","title":"BFI Audi 8J TTRS Complete Replacement Transmission Mount- Stage 1 - New V2","description":"\u003cp\u003eAfter an extensive design and testing period, BFI is proud to release of our complete replacement transmission mount for the Audi 8J TT-RS \u0026amp; 8P RS3 2.5 TFSI vehicles with 6-speed manual transmission.\u003c\/p\u003e\r\n\u003cp\u003eThis mount will completely replace your the factory transmission mount and will eliminate the soft rubber bushing that your car is equipped with from the factory.\u003c\/p\u003e\r\n\u003cp\u003eThis softness is a detriment to performance and overall longevity as the rubber in the mount will collapse over time hindering driveability and wasting horsepower. We eliminate this possibility by replacing the mount completely with our proprietary 70a durometer bushing and bracket design.\u003c\/p\u003e\r\n\u003cp\u003eMaximizing bushing area to minimize vibration where possible gives our mount the advantage of having the best ride characteristics possible from a urethane bushing mount.\u003c\/p\u003e\r\n\u003cp\u003eEach complete replacement mount comes with two bushings, one 6061 aluminum u-bracket with stainless centershaft, one 6061 aluminum center bracket, and all washers and hardware necessary to mount to your vehicle. Additionally all mounts include a proprietary bracket for clean mounting of power steering lines. (not pictured).\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFitment\/Applications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e8J TTRS - 2010-2014 (USA)\u003c\/li\u003e\r\n\u003cli\u003e8P RS3 - 2011-2012 (ROW)\u003c\/li\u003e\r\n\u003cli\u003e5N Tiguan 2.0T FWD - 2009-2018 (USA)\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Black Forest Industries","offers":[{"title":"Default Title","offer_id":44898444673318,"sku":"EBFI77-TJ-601","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/ebfi7rts1-2-audi-8j-ttrs-stage-1-transmission-mount-2.jpg?v=1682144134"},{"product_id":"apr-billet-stainless-steel-dogbone-mount-insert-version-2-late-mqb-models","title":"APR Billet Stainless-Steel Dogbone Mount Insert - Version 2, Late MQB Models","description":"\u003cp\u003e\u003cstrong\u003eThis listing is for the Version 2 insert. If you need the Version 1 insert, \u003ca title=\"APR MQB Version 2 Torque Arm Insert\" href=\"\/products\/apr-billet-stainless-steel-dogbone-mount-insert-vw-mk7-golf-gti-golf-r-audi-8v-a3-s3-rs3-8s-tt-tts-ttrs.html\" target=\"_self\"\u003eplease click or tap here\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe APR Billet Stainless-Steel Dogbone \/ Subframe Mount Insert limits driveline movement, which helps to minimize wheel-hop and torque steer. This provides a more direct driving experience by eliminating slop in the driveline and does so without introducing excessive or uncomfortable driveline vibration and noise.\u003c\/p\u003e\n\u003cp\u003eThe APR insert is created from thick, billet, stainless-steel. All mounts will slightly deform under use, but unlike all other units created from rubber, polyurethane, and even billet-aluminum, the APR unit will not heavily deform to the point of failure. Rest assured this simple upgrade will last the test of time, unlike others, and packs a limited lifetime warranty against cracking! \u003c\/p\u003e\n\u003cp\u003eWe offer the mount in two different configurations depending on the style of your factory mount. Be sure to check your subframe mount before purchase, and remember to always replace your factory 1-time use subframe bolt!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e2015-2021 VW Mk7 Golf, GTI, Golf R\u003c\/li\u003e\n\u003cli\u003e2015-2020 VW Mk7 Golf Sportwagen, Alltrack\u003c\/li\u003e\n\u003cli\u003e2015-2020 Audi 8V A3, S3, RS3\u003c\/li\u003e\n\u003cli\u003e2015-2023 Audi 8S TT, TTS, TTRS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTwo different versions are available, please check yours before ordering!\u003c\/strong\u003e\u003c\/p\u003e","brand":"APR","offers":[{"title":"Default Title","offer_id":44898445066534,"sku":"MS100142","price":87.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/apr-mqb-mk7-torque-arm-insert-ms100142.jpg?v=1682144154"},{"product_id":"034motorsport-billet-aluminum-upper-dogbone-mount-insert-vw-mk5-mk6-b6-5n-audi-8j-8p","title":"034Motorsport Billet Aluminum Upper Dogbone Mount Insert - VW Mk5\/Mk6\/B6\/5N, Audi 8J, 8P","description":"\u003cp\u003e\u003cstrong\u003eKIT INCLUDES:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e034Motorsport Upper Dogbone Mount Insert\u003c\/li\u003e\r\n\u003cli\u003e034Motorsport Lower Dogbone Mount Insert Spacer\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe 034Motorsport Upper Dogbone Mount Insert (patent pending) \u003cstrong\u003estrongly recommended\u003c\/strong\u003e for any MkV\/MkVI Volkswagen Golf\/GTI\/R\/Jetta\/GLI and 8P Audi A3 and 8J Audi TT\/TTS\/TTRS using any dogbone mount and dogbone mount insert. Aggressive driving that causes violent drivetrain movement, such as burn-outs that induce wheel-hop, will cause the upper and lower dogbone mounts to exert a bending moment on the dogbone mount arm, causing it to bend, and in some cases fail. When this failure occurs, the bottom of the engine is unconstrained and the engine will cause damage to other components in the engine bay. The 034Motorsport Upper Dogbone Mount Insert eliminates these bending forces, allowing the dogbone mount to perform as designed during these violent events.\u003c\/p\u003e\r\n\u003cp\u003eAny dogbone mount combined with a lower dogbone mount insert dramatically improves the feel and responsiveness of the drivetrain during spirited driving. However, this combination of modifications has revealed a scenario that applies forces to the dogbone mount arm that it was not designed for.\u003c\/p\u003e\r\n\u003cp\u003eThe lower dogbone mount insert limits compliance of the lower dogbone mount puck by filling large voids in the puck. During normal and spirited driving, this reduction in compliance results in more direct transitional response of the drivetrain to accelerative and decelerative forces. The driver feels more direct throttle response through the drivetrain without introducing a significant amount of NVH.\u003c\/p\u003e\r\n\u003cp\u003eHowever, violent drivetrain shocks, such as burn-out induced wheel-hop, introduce additional forces that can cause damage to the dogbone mount arm. In these violent events, the lower puck motion is limited by the dogbone insert, but the upper puck in unconstrained and is free to move forward.\u003c\/p\u003e\r\n\u003cp\u003eThis means that the entire puck assembly rotates forward at an angle towards the front of the car. Because the dogbone mount arm is clamped into the puck assembly, the rotation of the puck assembly generates a bending moment applied to the dogbone mount arm that it was not designed for.\u003c\/p\u003e\r\n\u003cp\u003e034's engineering team developed the 034Motorsport Billet Upper Dogbone Mount Insert to solve the issue. This insert slips into the front void of the upper dogbone mount puck, limiting the forward motion of the upper puck to match the limited forward-motion of the lower puck with the lower insert installed. The result is an upper and lower insert package that eliminates the rotation inside the puck assembly during extreme drivetrain shocks, and keeps the forces acting on the dogbone arm in the direction the arm was designed for. Subsequent testing showed no signs of bending or stress in the dogbone mount arm with both the upper and lower dogbone mount inserts installed. Watch the demonstration video below to see how the dogbone mount pucks move with just the lower insert, and the upper and lower insert combined.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFitment\/Applications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e2009-2013 Audi A3 8P\u003c\/li\u003e\r\n\u003cli\u003e2009-2014 Audi 8J TT\u003c\/li\u003e\r\n\u003cli\u003e2009-2014 Audi 8J TTS\u003c\/li\u003e\r\n\u003cli\u003e2009-2014 Audi 8J TTRS\u003c\/li\u003e\r\n\u003cli\u003e2009-2013 VW B6 CC\u003c\/li\u003e\r\n\u003cli\u003e2009 VW Eos\u003c\/li\u003e\r\n\u003cli\u003e2009 VW Mk5 GLI\u003c\/li\u003e\r\n\u003cli\u003e2011-2017 VW Mk6 GLI\u003c\/li\u003e\r\n\u003cli\u003e2009 VW Mk5 Rabbit\u003c\/li\u003e\r\n\u003cli\u003e2010-2014 VW Mk6 Golf\u003c\/li\u003e\r\n\u003cli\u003e2012-2013 VW Mk6 Golf R\u003c\/li\u003e\r\n\u003cli\u003e2009 VW Mk5 GTI\u003c\/li\u003e\r\n\u003cli\u003e2010-2014 VW Mk6 GTI\u003c\/li\u003e\r\n\u003cli\u003e2009 VW Mk5 Jetta\u003c\/li\u003e\r\n\u003cli\u003e2010-2017 VW Mk6 Jetta\u003c\/li\u003e\r\n\u003cli\u003e2009-2011 VW B6 Passat\u003c\/li\u003e\r\n\u003cli\u003e2009-2016 VW 5N Tiguan\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e\u003ca title=\"Installation Instructions\" href=\"https:\/\/store.034motorsport.com\/docs\/034motorsport-billet-upper-dogbone-mount-insert-mkv-mkvi-vw-golf-gti-r-jetta-gli-8p-audi-a3-s3-8j-tt-034-509-1040-diy-install-guide.pdf\" target=\"_blank\"\u003eClick or tap here\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstyle xml=\"space\"\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\r\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/ju43yDjTq3o\" width=\"320\" height=\"240\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44898463088934,"sku":"034-509-1040","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-509-1040-billet-upper-dogbone-insert-vw-mk5-mk6-audi-8p-8j.jpg?v=1682144573"},{"product_id":"bfi-b9-transmission-mount-insert-assembly-90a-durometer-urethane","title":"BFI B9 Transmission Mount Insert Assembly 90a Durometer Urethane","description":"\u003cp\u003ePut more power the the ground with the BFI B9 Transmission Insert. This part quickly and easily installs and fills the voids in your factory transmission mount, helping to limit movement and transfer of energy. Effectively this stiffer mount will allow more of your engine's horsepower to make it to the wheels rather than being lost to wasted movement.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWHY POLYURETHANE?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003ePolyurethane has always been used as a bushing material because it is able to absorb some engergy, while still being stiff enough to limit movement- thus giving the choice to dial in the optimal density for performance vs comfort. The reason many other companies choose to use full billet inserts stems mostly from the fact that they do not have the capability to offer polyurethane, and they would rather sell a part to you than not, regardless of the fact that it is not the optimal choice for material. Additionally the full billet metal inserts will be significantly more destructive to the existing rubber in your transmission mount which will rapidly deteriorate its integrity. Over time this will open up a larger gap and will induce extra play, ultimately making the full billet mounts ineffective. This is if the full billet inserts do not bend or snap first. Ultimately polyurethane has been, and will always be the best choice for this application.\u003c\/p\u003e","brand":"Black Forest Industries","offers":[{"title":"Default Title","offer_id":44898468987174,"sku":"EBFI7838W1002","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/bfi-b9-transmission-mount-insert-assembly-90a-durometer-urethane-1-ebfi7838w1002.jpg?v=1682144742"},{"product_id":"034motorsport-motorsport-engine-transmission-mount-pair-audi-8s-ttrs-8v-5-rs3-2-5","title":"034Motorsport Tracksport Engine\/Transmission Mount Pair - Audi 8S TTRS, 8V.5\/8Y RS3 2.5","description":"\u003ch3\u003e034Motorsport's Tracksport Engine and Transmission Mounts for Audi 8S TTRS and 8V.5 RS3 models are the new standard in ultra-high performance.\u003c\/h3\u003e\n\u003cp\u003eThese mounts are designed with extreme performance in mind, manufactured from billet aluminum and high-durometer rubber, making them virtually indestructible, while maintaining better ride characteristics than polyurethane alternatives. These mounts have a lifetime guarantee regardless of power level applied and type of track racing they are used for.\u003c\/p\u003e\n\u003cp\u003eTracksport Mounts are void-free and fluid-free, eliminating the slop associated with the factory engine\/transmission mounts, and are designed to be completely rebuildable with replaceable Density Line rubber bushings. These extreme-duty mounts will increase noise, vibration, and harshness (NVH) transfer into the cabin, as they are designed to drastically reduce engine movement compared to the factory parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH-DUROMETER RUBBER VS. POLYURETHANE:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eDensity Line Mounts are manufactured from high-durometer rubber instead of polyurethane for a number of reasons. While vulcanized rubber mounts are more expensive to prototype due to increased complexity of manufacturing and high initial tooling costs, rubber is inherently better than polyurethane as a damping medium for mounts and bushings.\u003c\/p\u003e\n\u003cp\u003eRubber is able to deal with stress under both tension and compression, while polyurethane mounts rely on the damping medium to be effective only under compression. Rubber is also excellent in shear, where polyurethane is ineffective, making it ideal for applications that apply a shear force to the bushing during articulation. Rubber does not pack and wear like polyurethane does, which ultimately results in a long-lasting part with consistent performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBUYER'S GUIDE:\u003c\/strong\u003e\u003cbr\u003eThe following guide is designed to help customers choose which mount best meets their specific needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStreetSport\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003ePower levels exceeding Stage 1\u003c\/li\u003e\n\u003cli\u003eCar is launched or taken to HPDE or Drag events\u003c\/li\u003e\n\u003cli\u003eCar is used on road as a commuter\u003c\/li\u003e\n\u003cli\u003eLess NVH is desired\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eTrackSport\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003ePower levels exceeding conventional stages\u003c\/li\u003e\n\u003cli\u003eCar is heavily launched at drag strips or only used for track events\u003c\/li\u003e\n\u003cli\u003eUltimate performance and rigidity is desired\u003c\/li\u003e\n\u003cli\u003e\"Where we're going, we don't care about NVH!\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eManufactured from 6061-T6 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eAnodized for Long Life and Great Looks\u003c\/li\u003e\n\u003cli\u003eExtreme-Duty for the Most Punishing Racing and Extreme Performance Applications\u003c\/li\u003e\n\u003cli\u003eGreat Solution for Highly-Tuned Stock Turbo and Big Turbo Power Levels\u003c\/li\u003e\n\u003cli\u003eReplaceable 65 Durometer Density Line Rubber Bushings with Void-Free Construction\u003c\/li\u003e\n\u003cli\u003eVirtually Indestructible\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty\u003c\/li\u003e\n\u003cli\u003eReduced Drivetrain Slop\u003c\/li\u003e\n\u003cli\u003eDecreased Engine Movement Under Load\u003c\/li\u003e\n\u003cli\u003eMore Direct Power Transfer\u003c\/li\u003e\n\u003cli\u003eImproved Shifting Feel\u003c\/li\u003e\n\u003cli\u003eComplete Drop-In Replacement of Factory Engine\/Transmission Mounts\u003c\/li\u003e\n\u003cli\u003eSold in Pairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eFitment\/Applications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e2022+ Audi 8Y RS3 2.5T\u003c\/li\u003e\n\u003cli\u003e2017-2020 Audi 8V.5 RS3 2.5T\u003c\/li\u003e\n\u003cli\u003e2018-2023 Audi 8S TTRS 2.5T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eMounting hardware for motor-side mount is not included as the factory hardware can be reused.\u003cbr\u003eLifetime warranty covers replacing Density Line rubber bushings should they ever wear out, and replacement of any billet aluminum component in the unlikely event of a failure.\u003c\/p\u003e\n\u003cp\u003eWe recommend having these mounts installed by an experienced mechanic. The installation process is the same as the factory mount remove and replace procedure.\u003c\/p\u003e\n\u003cstyle xml=\"space\"\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/mChCiLoF6k8\" width=\"320\" height=\"240\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLearn More:\u003c\/strong\u003e \u003ca title=\"Prop 65 Warning\" href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.p65warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44898496151846,"sku":"034-509-5030","price":1169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-509-5030-1.jpg?v=1682146134"},{"product_id":"034motorsport-dogbone-mount-pair-street-density-vw-mk7-mk7-5-8v-8s-audi","title":"034Motorsport Dogbone Mount Pair, Street Density, VW Mk7 \/ Mk7.5, 8V \/ 8S Audi","description":"\u003ch3\u003e034Motorsport's Street Density Dogbone Mount pair for Volkswagen Mk7 \/ Mk7.5 and Audi 8V \/ 8S models sets the new standard in performance mount solutions.\u003c\/h3\u003e\r\n\u003cp\u003eDesigned with performance in mind and manufactured from high-durometer rubber for increased performance and durability, the Street Density Dogbone Mount Pair is a complete performance replacement for the factory rubber dogbone mounts.\u003c\/p\u003e\r\n\u003cp\u003eThe Density Line Dogbone Mount Pair is manufactured from 65 durometer rubber - as opposed to the factory part's 55 durometer - and features a steel thread insert in the upper mount for increased resistance to stripping threads. This kit includes a new OEM dogbone mount bolt.\u003c\/p\u003e\r\n\u003cp\u003eThis upgrade is compatible with our full line of MQB drivetrain upgrades, and offers decreased drivetrain movement, crisper shifting, and reduced wheel hop, with minimal noticeable increase in noise, vibration, or harshness (NVH) inside of the cabin. (\u003cstrong\u003ePlease Note:\u003c\/strong\u003e NVH changes may be more noticeable in vehicles equipped with DSG or Tiptronic transmissions, and\/or if your factory engine\/transmission mounts are worn or failed. We recommend giving the mounts at least 250 miles to break-in after installation.)\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHigh-Durometer Rubber vs. Polyurethane:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eDensity Line Mounts are manufactured from high-durometer rubber instead of polyurethane for a number of reasons. While vulcanized rubber mounts are more expensive to prototype due to increased complexity of manufacturing and high initial tooling costs, rubber is inherently better than polyurethane as a damping medium for mounts and bushings.\u003c\/p\u003e\r\n\u003cp\u003eRubber is able to deal with stress under both tension and compression, while polyurethane mounts rely on the damping medium to be effective only under compression. Rubber is also excellent in shear, where polyurethane is ineffective, making it ideal for control arm bushings that apply a shear force to the bushing during articulation.\u003c\/p\u003e\r\n\u003cp\u003eRubber does not pack and wear like polyurethane does, which ultimately results in a long-lasting part with consistent performance and comfort.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003eComplete Drop-In Replacement of Factory Mounts\u003c\/li\u003e\r\n\u003cli\u003eCompatible with 034Motorsport's Version 1 MQB Lower Dogbone Mount Insert, Upper Insert, and Spherical Dogbone\u003c\/li\u003e\r\n\u003cli\u003eManufactured from 65 Durometer Rubber\u003c\/li\u003e\r\n\u003cli\u003eUpgraded Steel Thread Insert in Upper Mount Replacing Factory Aluminum Which is Prone to Stripping\u003c\/li\u003e\r\n\u003cli\u003eReduced Drivetrain Movement\u003c\/li\u003e\r\n\u003cli\u003eDecreased Engine Movement Under Load\u003c\/li\u003e\r\n\u003cli\u003eMore Direct Power Transfer\u003c\/li\u003e\r\n\u003cli\u003eImproved Shifting Feel\u003c\/li\u003e\r\n\u003cli\u003eSold as a Pair\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eWhat Is Included:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003eLower MQB Dogbone Mount Puck with Upgraded 65 Durometer Rubber\u003c\/li\u003e\r\n\u003cli\u003eUpper MQB Dogbone Mount Puck with Upgraded 65 Durometer Rubber and Upgraded Steel Threads to Prevent Stripping\u003c\/li\u003e\r\n\u003cli\u003eVAG-N91201001 OEM MQB Dogbone Mount Puck Bolt\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003eInstallation of these mounts requires removal of the front subrame and the use of a press to remove and replace the dogbone mounts. For this reason, we recommend taking your vehicle to a reputable Audi\/Volkswagen specialist for installation.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e1 Year Limited Replacement Warranty (If you encounter any issues with our products outside of the warranty period, we will work with you to provide a resolution.)\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44898508669222,"sku":"034-509-1034","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/dogbone-mount-pair-mqb-mk7-volkswagen-golf-gti-r-8v-audi-s3-rs3-street-density-034-509-1034-1.jpg?v=1682146614"},{"product_id":"034motorsport-billet-spherical-dogbone-mount-8v-5-audi-s3-vw-mk7-5-golf-r-jetta-dq380-381","title":"034Motorsport Billet Spherical Dogbone Mount - 8V.5 Audi S3, VW Mk7.5 Golf\/GTI\/R\/Jetta\/GLI DQ380\/381 7 Speed DSG","description":"\u003ch3\u003e034Motorsport's Billet Spherical Dogbone Mount with MQB Upper Dogbone Mount Insert (patent pending) for 8V.5 Audi S3 (7-speed) and Mk7.5 Volkswagen Golf R\/GTI\/Jetta GLI (7-speed) is the new standard in performance and durability.\u003c\/h3\u003e\n\u003cp\u003eThis dogbone mount was engineered with performance in mind, manufactured from billet aluminum and stainless steel, and features a genuine Aurora Spherical Bearing to maintain proper articulation and reduce NVH transfer. The Billet Spherical Dogbone Mount is machined and assembled in-house, designed to eliminate the slop associated with the factory mount, and will better withstand the forces generated by hard launches.\u003c\/p\u003e\n\u003cp\u003eThe result is a locked-down drivetrain, crisper shifting, and virtually no wheel hop. The Motorsport Dogbone Mount will cause some increase in noise, vibration, and harshness (NVH) inside of the cabin.\u003c\/p\u003e\n\u003cp\u003eWhile this dogbone mount kit includes the 034Motorsport Billet Upper Dogbone Mount Insert, it does not come with the \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca title=\"034Motorsport MQB Lower Dogbone Mount Insert\" href=\"\/034-motorsport-billet-aluminum-mqb-dogbone-mount-insert-mkvii-volkswagen-golf-gti-r-alltrack-8v-audi-a3-s3.html\" target=\"_blank\"\u003e034Motorsport Billet Lower Dogbone Mount Insert\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e. The lower insert is required for proper installation of the upper dogbone mount insert.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThis dogbone mount is designed to work in vehicles equipped with the 7 speed DSG transmission. If you have a 6 speed DSG transmission, \u003ca title=\"034Motorsport 6 Speed DSG dogbone mount\" href=\"\/034-motorsport-billet-spherical-mqb-dogbone-mount-for-audi-8v-a3-s3-8s-tt-tts-vw-mk7-golf-gti-golf-r.html\" target=\"_blank\"\u003eplease see this listing instead.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eBolt-In Performance Upgrade for Factory Dogbone Mount\u003c\/li\u003e\n\u003cli\u003eIncludes Billet Aluminum MQB Upper Dogbone Mount Insert (patent pending)\u003c\/li\u003e\n\u003cli\u003eReduced Drivetrain Slop \u0026amp; Engine Movement Under Load\u003c\/li\u003e\n\u003cli\u003eMore Direct Power Transfer \u0026amp; Improved Shifting Feel\u003c\/li\u003e\n\u003cli\u003eIncreased Strength \u0026amp; Improved Durability vs. Factory Part\u003c\/li\u003e\n\u003cli\u003eT6-6061 Billet Aluminum Body\u003c\/li\u003e\n\u003cli\u003e303 Stainless Steel Spacers\u003c\/li\u003e\n\u003cli\u003eGenuine Aurora Spherical Bearing\u003c\/li\u003e\n\u003cli\u003eRebuildable Design\u003c\/li\u003e\n\u003cli\u003eNew Factory Stretch Bolts Included!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis Product Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eFully Assembled Billet Spherical Dogbone Mount\u003c\/li\u003e\n\u003cli\u003eThree New Replacement OEM Stretch Bolts\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"034Motorsport MQB Upper Dogbone Mount Insert\" href=\"\/034motorsport-billet-aluminum-mqb-upper-dogbone-mount-insert-mk7-volkswagen-golf-gti-r-8v-8v-5-audi-a3-s3-rs3-mkiii-tt-tts-ttrs.html\" target=\"_blank\"\u003eBillet Aluminum MQB Upper Dogbone Mount Insert (patent pending)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis Product Requires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e\u003ca title=\"034Motorsport Billet Alluminum MQB Dogbone Mount Insert\" href=\"https:\/\/store.ngpracing.com\/034-motorsport-billet-aluminum-mqb-dogbone-mount-insert-mkvii-volkswagen-golf-gti-r-alltrack-8v-audi-a3-s3.html\" target=\"_blank\"\u003eBillet Aluminum MQB Dogbone Mount Insert\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e2018 - Present Audi A3\/S3 (8V.5 - 7-speed DSG)\u003c\/li\u003e\n\u003cli\u003e2018 - 2021 Volkswagen GTI (Mk7.5 7-speed DSG)\u003c\/li\u003e\n\u003cli\u003e2017 - 2021 Volkswagen Golf R (Mk7, Mk7.5 - 7-speed DSG)\u003c\/li\u003e\n\u003cli\u003e2019 - Present Volkswagen Jetta GLI (Mk7.5 - 7-speed DSG)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis dogbone mount will fit the above models equipped with the 7 speed DQ380 or DQ381 DSG transmission.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIf you need assistance identifying which transmission your vehicle is equipped with, please \u003ca title=\"Contact Us Page - NGP Racing\" href=\"\/contact-us\" target=\"_blank\"\u003econtact us\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e\u003ca title=\"Installation Instructions\" href=\"https:\/\/store.034motorsport.com\/docs\/034motorsport-billet-plus-spherical-dogbone-mount-8s-audi-ttrs-8v-rs3-034-509-1026-diy-install-guide.pdf\" target=\"_blank\"\u003eClick Here!\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1 Year Limited Replacement Warranty (If you encounter any issues with our products outside of the warranty period, we will work with you to provide a resolution.) 034Motorsport products that are installed with BFI motor or transmission mount products will not qualify for warranty.\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44898513584422,"sku":"034-509-1039","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-509-1039-1.jpg?v=1682146899"},{"product_id":"034motorsport-dogbone-mount-performance-pack-with-pucks-audi-8v-a3-s3-8s-tt-tts-vw-mk7-golf-gti-golf-r-with-6-speed-dsg","title":"034Motorsport Billet Spherical Dogbone Mount Performance Pack w\/ Pucks, Audi 8V, 8S, VW Mk7,Mk7.5 - 6 Speed Manual\/DSG","description":"\u003cp\u003eThe 034Motorsport Billet Spherical Dogbone Mount Performance Pack \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ewith\u003c\/strong\u003e\u003c\/span\u003e Dogbone Pucks for the Audi 8V.5A3\/S3 and Volkswagen Mk7.5 Golf\/Golf R\/GTI\/Jetta with 7-Speed DSG includes all of the 034Motorsport performance products associated with the dogbone mount in one comprehensive and convenient package. Included with this kit is the Billet Spherical Dogbone Mount, Upper Dogbone Mount Insert, Lower Dogbone Mount Insert, and all new hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBILLET ALUMINUM SPHERICAL DOGBONE MOUNT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 034Motorsport Billet Spherical Dogbone Mount is the new standard in performance and durability. This dogbone mount was engineered with performance in mind, manufactured from billet aluminum and stainless steel, and features a genuine Aurora Spherical Bearing to maintain proper articulation and reduce NVH transfer. The Billet Spherical Dogbone Mount is machined and assembled in-house, designed to eliminate the slop associated with the factory mount, and will better withstand the forces generated by hard launches.\u003c\/p\u003e\n\u003cp\u003eThe result is a locked-down drivetrain, crisper shifting, and virtually no wheel hop. The Motorsport Dogbone Mount will cause some increase in noise, vibration, and harshness (NVH) inside of the cabin.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThis dogbone mount will fit vehicles equipped with either a 6 speed manual or DSG transmission. If you have a 7 speed DSG transmission, \u003ca title=\"034Motorsport 7 speed DSG dogbone mount performance pack with pucks\" href=\"\/034motorsport-billet-spherical-dogbone-mount-performance-pack-with-dogbone-pucks-audi-8v-5-a3-s3-vw-mk7-5-gti-gli-golf-r-with-7-speed-dsg.html\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eplease see this listing instead\u003c\/span\u003e\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBillet Spherical Dogbone Mount Features:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eBolt-In Performance Upgrade for Factory Dogbone Mount\u003c\/li\u003e\n\u003cli\u003eReduced Drivetrain Slop \u0026amp; Engine Movement Under Load\u003c\/li\u003e\n\u003cli\u003eMore Direct Power Transfer \u0026amp; Improved Shifting Feel\u003c\/li\u003e\n\u003cli\u003eIncreased Strength \u0026amp; Improved Durability vs. Factory Part\u003c\/li\u003e\n\u003cli\u003eT6-6061 Billet Aluminum Body\u003c\/li\u003e\n\u003cli\u003e303 Stainless Steel Spacers\u003c\/li\u003e\n\u003cli\u003eGenuine Aurora Spherical Bearing\u003c\/li\u003e\n\u003cli\u003eRebuildable Design\u003c\/li\u003e\n\u003cli\u003eNew Factory Stretch Bolts Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBILLET ALUMINUM UPPER DOGBONE MOUNT INSERT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 034Motorsport MQB Upper Dogbone Mount Insert (patent pending) is required for any MQB platform MkVII VW Golf\/GTI\/R, MkVII VW GLI, 8V\/8V.5 Audi A3\/S3\/RS3 \u0026amp; MkIII Audi TT\/TTS\/TTRS using an aftermarket dogbone mount and dogbone mount insert. Aggressive driving that causes violent drivetrain movement, such as burn-outs that induce wheel-hop, will cause the upper and lower dogbone mounts to exert a bending moment on the dogbone mount arm, causing it to bend, and in some cases fail. When this failure occurs, the bottom of the engine is unconstrained and the engine will cause damage to other components in the engine bay. The 034Motorsport MQB Upper Dogbone Mount Insert eliminates these bending forces, allowing the dogbone mount to perform as designed during these violent events.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration-line: underline;\"\u003eBillet Upper Dogbone Mount Insert Features:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eT6-6061 Billet Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eClear Anodized Finish for Durability\u003c\/li\u003e\n\u003cli\u003ePrevents Lower Insert From Bending\u003c\/li\u003e\n\u003cli\u003ePrevents Billet Dogbone Arm From Bending\u003c\/li\u003e\n\u003cli\u003eEngineered to Fill Upper Void In Factory Transmission Mount\u003c\/li\u003e\n\u003cli\u003eDrastically Reduces Transmission Movement During Shifting \u0026amp; Deceleration\u003c\/li\u003e\n\u003cli\u003eImproves Shifting Feel, Resulting in Crisper Shifts\u003c\/li\u003e\n\u003cli\u003eVirtually No Additional NVH Transfer Inside Cabin\u003c\/li\u003e\n\u003cli\u003eEasy, Straightforward Installation Takes Minutes!\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty for Original Purchaser\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBILLET ALUMINUM LOWER DOGBONE MOUNT INSERT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis precision-machined billet aluminum insert is designed to fill the large voids in the factory dogbone mount, and limit transmission and engine movement without sacrificing ride quality or introducing any perceivable additional noise, vibration, or harshness into the cabin. By filling the void in the factory mount, this insert eliminates the associated slop and ensures that you're experiencing crisper shifts and a more direct, connected driving experience.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBillet Aluminum Lower Dogbone Mount Insert Features:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eT6-6061 Billet Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eClear Anodized Finish for Durability\u003c\/li\u003e\n\u003cli\u003eEngineered to Fill Void In Factory Transmission Mount\u003c\/li\u003e\n\u003cli\u003eDrastically Reduces Transmission Movement During Shifting \u0026amp; Deceleration\u003c\/li\u003e\n\u003cli\u003eImproves Shifting Feel, Resulting in Crisper Shifts\u003c\/li\u003e\n\u003cli\u003eVirtually No Additional NVH Transfer Inside Cabin\u003c\/li\u003e\n\u003cli\u003eEasy, Straightforward Installation Takes Minutes!\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty for Original Purchaser\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eSTREET DENSITY DOGBONE MOUNT PUCK PAIR\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e034Motorsport's Street Density Dogbone Mount pair for MkVII Volkswagen and 8V\/8S Audi models is manufactured from high-durometer rubber for increased performance and durability. The Density Line Dogbone Mount Pair is manufactured from 65 durometer rubber - as opposed to the factory part's 55 durometer - and features a steel thread insert in the upper mount for increased resistance to stripping threads.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eStreet Density Dogbone Mount Puck Features:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eComplete Drop-In Replacement of Factory Mounts\u003c\/li\u003e\n\u003cli\u003eCompatible with 034Motorsport's Version 1 MQB Lower Dogbone Mount Insert, Upper Insert, and Spherical Dogbone\u003c\/li\u003e\n\u003cli\u003eManufactured from 65 Durometer Rubber\u003c\/li\u003e\n\u003cli\u003eUpgraded Steel Thread Insert in Upper Mount Replacing Factory Aluminum Which is Prone to Stripping\u003c\/li\u003e\n\u003cli\u003eReduced Drivetrain Movement\u003c\/li\u003e\n\u003cli\u003eDecreased Engine Movement Under Load\u003c\/li\u003e\n\u003cli\u003eMore Direct Power Transfer\u003c\/li\u003e\n\u003cli\u003eImproved Shifting Feel\u003c\/li\u003e\n\u003cli\u003eSold as a Pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\/Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e2015-2021 VW Mk7 Golf R\u003c\/li\u003e\n\u003cli\u003e2015-2021 VW Mk7, Mk7.5 GTI\u003c\/li\u003e\n\u003cli\u003e2015 VW Golf Sportwagen TDI\u003c\/li\u003e\n\u003cli\u003e2015 VW Mk7 Golf Sportwagen TDI\u003c\/li\u003e\n\u003cli\u003e2017-2019 VW Mk7, Mk7.5 Golf Sportwagen AWD\u003c\/li\u003e\n\u003cli\u003e2017-2019 VW Mk7, Mk7.5 Alltrack\u003c\/li\u003e\n\u003cli\u003e2019+ VW Mk7 GLI\u003c\/li\u003e\n\u003cli\u003e2015-2017 Audi A3 8V.5 2.0T\u003c\/li\u003e\n\u003cli\u003e2015-2017 Audi S3 8V.5 2.0T\u003c\/li\u003e\n\u003cli\u003e2015+ Audi 8S TT\u003c\/li\u003e\n\u003cli\u003e2015+ Audi 8S TTS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFits the above models equipped with a 6 speed DSG transmission. Need help identifying what transmission you have? Please feel free to \u003ca title=\"Contact Us Page - NGP Racing\" href=\"\/contact-us\"\u003econtact us\u003c\/a\u003e at any time.\u003c\/p\u003e\n\u003cp\u003e034Motorsport products that are installed with BFI motor or transmission mount products will not qualify for warranty.\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44898574434598,"sku":"034-509-1041","price":475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/034-509-1041-1.jpg?v=1682149464"},{"product_id":"awe-tuning-drivetrain-stabilizer-dts-mount-package-polyurethane","title":"AWE Tuning Drivetrain Stabilizer (DTS) Mount Package - Polyurethane","description":"For more extreme uses than daily driving alone, this is the DTS mounting kit for you. This mounting kit can be the upgrade from the rubber mounts if you are looking for a more rigid driving experience, or a replacement kit for your existing DTS with poly mounts. This will give your car an even more solid connection at the expense of some vibration transmitted through the chassis. Includes all needed hardware to replace the old mount.\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1998\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA4\u003c\/td\u003e\n\u003ctd\u003eAvant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1997-2001\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA4\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2001\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA4 Quattro\u003c\/td\u003e\n\u003ctd\u003eAvant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1997-2001\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA4 Quattro\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1998-1999\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6 Quattro\u003c\/td\u003e\n\u003ctd\u003eAvant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1998-1999\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6 Quattro\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2001-2002\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eS4\u003c\/td\u003e\n\u003ctd\u003eAvant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2002\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eS4\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1998-2001\u003c\/td\u003e\n\u003ctd\u003eVolkswagen\u003c\/td\u003e\n\u003ctd\u003ePassat\u003c\/td\u003e\n\u003ctd\u003eGLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1998-2001\u003c\/td\u003e\n\u003ctd\u003eVolkswagen\u003c\/td\u003e\n\u003ctd\u003ePassat\u003c\/td\u003e\n\u003ctd\u003eGLX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"AWE Tuning","offers":[{"title":"Default Title","offer_id":44991263473958,"sku":"AWE2210-11014","price":155.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/094003bc708a29484646ae9e57e463ef.jpg?v=1683596534"},{"product_id":"034motorsport-driveshaft-support-center-bearing-b7-rs4","title":"034MOTORSPORT DRIVESHAFT SUPPORT CENTER BEARING, B7 RS4","description":"\u003cp\u003eDriveshaft Center Support Bearings on the B7 RS4 are known to wear out, causing vibrations that are felt throughout the cabin. When this happens, there’s only one way to fix it. The 034Motorsport replacement center support bearing is an OEM-like replacement that mitigates any vibration and perfectly performs in all conditions.\u003c\/p\u003e\r\n\u003cp\u003eThe dust boots found on the center driveshaft support bearing on B7 Audi RS4s can often crack and tear after years of use. The 034Motorsport replacement boot is an OEM-Like replacement that perfectly seals the support bearing from dust or grime.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003eOE Style\/Quality Driveshaft Center Support Bearing and Boot\u003c\/li\u003e\r\n\u003cli\u003eReplace your worn out bearing instead of buying an entire driveshaft\u003c\/li\u003e\r\n\u003cli\u003eNot available as a replacement part from Audi\u003c\/li\u003e\r\n\u003cli\u003eComplete kit, includes a new boot\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFITMENT\/APPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e2006-2009 Audi B7 RS4\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44994651423014,"sku":"034-506-0012","price":155.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/driveshaft-support-center-bearing-b7-rs4-034-506-0012-01.jpg?v=1683639643"},{"product_id":"jxb-performance-driveshaft-center-support-bearing-carrier-upgrade-audi-b5-a4-s4-rs4","title":"JXB Performance Driveshaft Center Support Bearing Carrier Upgrade - Audi B5 A4\/S4\/RS4","description":"\u003cp\u003eThe stock center support bearing carrier holds the driveshaft in place with rubber so thin that only about 20 lbs of force will move it from center to the end of its travel.  While that’s great for making sure no NVH makes it to the cabin, the stock bushing is extremely prone to failure, especially in harsher climates and on higher-powered cars.  Even on the best-kept cars, the stock rubber bushing sags, dry rots, and cracks by the time it’s 10-15 years old.  When the bushing lets go, it leads to excessive vibrations and clunking which can damage the transmission and rear diff.  To make matters worse, the stock carrier is molded onto the center support bearing, leading to costly driveshaft replacement.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eThe Bushings\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eTwo options are available for the bushings, both of which are many times stiffer than the stock bushings. We’ve paid close attention to the NVH levels associated with this upgrade. We’ve engineered custom isolator bushings that separate the carrier from the body of the vehicle and mounting bolts to substantially reduce NVH levels.\u003c\/p\u003e\r\n\u003cp\u003eThe street bushings absorb most of the NVH from the drivetrain. Expect some light NVH at some speeds in the form of a soft hum. With a modified exhaust or windows down you’ll probably never hear it. Most NVH is heard between 20-40 mph. At highway speeds it fades away.\u003c\/p\u003e\r\n\u003cp\u003eThe track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise throughout the low range, again fading at higher speeds, but not entirely. Not sure which is for you? Try them both, they’re interchangeable!\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eInstallation doesn’t require removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required.\u003c\/p\u003e\r\n\u003cstyle xml=\"space\"\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\r\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/sGGWIAaEBZI\" width=\"320\" height=\"240\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"JXB Performance","offers":[{"title":"Street (soft, more quiet)","offer_id":44994773156134,"sku":"JXB-B5-AUDI-CB","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Track (hard, louder)","offer_id":44994773188902,"sku":"JXB-B5-AUDI-CB","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Give me both!","offer_id":44994773221670,"sku":"JXB-B5-AUDI-CB","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/jxb-performance-audi-b5-driveshaft-center-support-carrier.jpg?v=1683642212"},{"product_id":"jxb-performance-driveshaft-center-support-bearing-carrier-upgrade-audi-b6-b7-a4-s4-rs4-with-01a-01e-0a3-transmission","title":"JXB Performance Driveshaft Center Support Bearing Carrier Upgrade - Audi B6\/B7 A4\/S4\/RS4 with 01A\/01E\/0A3 Transmission","description":"\u003cp\u003eThe stock center support bearing carrier holds the driveshaft in place with rubber so thin that only about 20 lbs of force will move it from center to the end of its travel.  While that’s great for making sure no NVH makes it to the cabin, the stock bushing is extremely prone to failure, especially in harsher climates and on higher-powered cars.  Even on the best-kept cars, the stock rubber bushing sags, dry rots, and cracks by the time it’s 10-15 years old.  When the bushing lets go, it leads to excessive vibrations and clunking which can damage the transmission and rear diff.  To make matters worse, the stock carrier is molded onto the center support bearing, leading to costly driveshaft replacement.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eThe Bushings\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eTwo options are available for the bushings, both of which are many times stiffer than the stock bushings. We’ve paid close attention to the NVH levels associated with this upgrade. We’ve engineered custom isolator bushings that separate the carrier from the body of the vehicle and mounting bolts to substantially reduce NVH levels.\u003c\/p\u003e\r\n\u003cp\u003eThe street bushings absorb most of the NVH from the drivetrain. Expect some light NVH at some speeds in the form of a soft hum. With a modified exhaust or windows down you’ll probably never hear it. Most NVH is heard between 20-40 mph. At highway speeds it fades away.\u003c\/p\u003e\r\n\u003cp\u003eThe track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise throughout the low range, again fading at higher speeds, but not entirely. Not sure which is for you? Try them both, they’re interchangeable!\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFitment\/Applications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e2003-2005 Audi B6 A4 equipped with either the 01A 5 speed, 01E 6 speed, or 0A3 6 speed manual transmission\u003c\/li\u003e\r\n\u003cli\u003e2005.5-2008 Audi B7 A4 equipped with either the 01A 5 speed, 01E 6 speed, or 0A3 6 speed manual transmission\u003c\/li\u003e\r\n\u003cli\u003e2005-2008 Audi B7 RS4 equipped with the 0A3 6 speed manual transmission\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eInstallation doesn’t require removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required.\u003c\/p\u003e\r\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/pg0sshyQ45U\" width=\"320\" height=\"240\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\r\n\u003cstyle xml=\"space\"\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e","brand":"JXB Performance","offers":[{"title":"Street (soft, more quiet)","offer_id":44994773287206,"sku":"JXB-B67-AUDI-CB-01","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Track (hard, louder)","offer_id":44994773319974,"sku":"JXB-B67-AUDI-CB-01","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Give me both!","offer_id":44994773352742,"sku":"JXB-B67-AUDI-CB-01","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/jxb-performance-audi-b5-driveshaft-center-support-carrier_1.jpg?v=1683642216"},{"product_id":"jxb-performance-driveshaft-center-support-bearing-carrier-upgrade-audi-b6-b7-a4-s4-rs4-with-02x-5hp19-transmission","title":"JXB Performance Driveshaft Center Support Bearing Carrier Upgrade - Audi B6\/B7 A4\/S4 with 02X\/5HP19 Transmission","description":"\u003cp\u003eThe stock center support bearing carrier holds the driveshaft in place with rubber so thin that only about 20 lbs of force will move it from center to the end of its travel.  While that’s great for making sure no NVH makes it to the cabin, the stock bushing is extremely prone to failure, especially in harsher climates and on higher-powered cars.  Even on the best-kept cars, the stock rubber bushing sags, dry rots, and cracks by the time it’s 10-15 years old.  When the bushing lets go, it leads to excessive vibrations and clunking which can damage the transmission and rear diff.  To make matters worse, the stock carrier is molded onto the center support bearing, leading to costly driveshaft replacement.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eThe Bushings\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eTwo options are available for the bushings, both of which are many times stiffer than the stock bushings. We’ve paid close attention to the NVH levels associated with this upgrade. We’ve engineered custom isolator bushings that separate the carrier from the body of the vehicle and mounting bolts to substantially reduce NVH levels.\u003c\/p\u003e\r\n\u003cp\u003eThe street bushings absorb most of the NVH from the drivetrain. Expect some light NVH at some speeds in the form of a soft hum. With a modified exhaust or windows down you’ll probably never hear it. Most NVH is heard between 20-40 mph. At highway speeds it fades away.\u003c\/p\u003e\r\n\u003cp\u003eThe track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise throughout the low range, again fading at higher speeds, but not entirely. Not sure which is for you? Try them both, they’re interchangeable!\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFitment\/Applications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2003-2005 Audi B6 A4 equipped with either the 02X manual or 5HP19 5 speed automatic transmission\u003c\/li\u003e\r\n\u003cli\u003e2005.5-2008 Audi B7 A4 equipped with either the 02X manual or 5HP19 5 speed automatic transmission\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv\u003eIf you need assistance identifying which transmission your vehicle is equipped with, \u003ca title=\"Contact Us Page - NGP Racing\" href=\"\/contact-us\" target=\"_blank\"\u003eplease don't hesitate to contact us\u003c\/a\u003e.\u003c\/div\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eInstallation doesn’t require removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required.\u003c\/p\u003e\r\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/pg0sshyQ45U\" width=\"320\" height=\"240\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\r\n\u003cstyle xml=\"space\"\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e","brand":"JXB Performance","offers":[{"title":"Street (soft, more quiet)","offer_id":44994773614886,"sku":"JXB-B67-AUDI-CB-02","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Track (hard, louder)","offer_id":44994773647654,"sku":"JXB-B67-AUDI-CB-02","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Give me both!","offer_id":44994773680422,"sku":"JXB-B67-AUDI-CB-02","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/jxb-performance-audi-b6-driveshaft-center-support-carrier-02x-5hp19.png?v=1683642229"},{"product_id":"jxb-performance-driveshaft-center-support-bearing-carrier-upgrade-audi-b6-b7-a4-s4-with-6hp19-transmission","title":"JXB Performance Driveshaft Center Support Bearing Carrier Upgrade - Audi B6\/B7 A4\/S4 with 6HP19 6 speed Automatic Transmission","description":"\u003cp\u003eThe stock center support bearing carrier holds the driveshaft in place with rubber so thin that only about 20 lbs of force will move it from center to the end of its travel.  While that’s great for making sure no NVH makes it to the cabin, the stock bushing is extremely prone to failure, especially in harsher climates and on higher-powered cars.  Even on the best-kept cars, the stock rubber bushing sags, dry rots, and cracks by the time it’s 10-15 years old.  When the bushing lets go, it leads to excessive vibrations and clunking which can damage the transmission and rear diff.  To make matters worse, the stock carrier is molded onto the center support bearing, leading to costly driveshaft replacement.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eThe Bushings\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eTwo options are available for the bushings, both of which are many times stiffer than the stock bushings. We’ve paid close attention to the NVH levels associated with this upgrade. We’ve engineered custom isolator bushings that separate the carrier from the body of the vehicle and mounting bolts to substantially reduce NVH levels.\u003c\/p\u003e\r\n\u003cp\u003eThe street bushings absorb most of the NVH from the drivetrain. Expect some light NVH at some speeds in the form of a soft hum. With a modified exhaust or windows down you’ll probably never hear it. Most NVH is heard between 20-40 mph. At highway speeds it fades away.\u003c\/p\u003e\r\n\u003cp\u003eThe track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise throughout the low range, again fading at higher speeds, but not entirely. Not sure which is for you? Try them both, they’re interchangeable!\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFitment\/Applications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e2003-2005 Audi B6 A4 equipped with the 6HP19 6 speed automatic transmission\u003c\/li\u003e\r\n\u003cli\u003e2005.5-2008 Audi B7 A4 equipped with the 6HP19 6 speed automatic transmission\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv\u003eIf you need assistance identifying which transmission your vehicle is equipped with, \u003ca title=\"Contact Us Page - NGP Racing\" href=\"\/contact-us\" target=\"_blank\"\u003eplease don't hesitate to contact us\u003c\/a\u003e.\u003c\/div\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eInstallation doesn’t require removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required.\u003c\/p\u003e\r\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/pg0sshyQ45U\" width=\"320\" height=\"240\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\r\n\u003cstyle xml=\"space\"\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e","brand":"JXB Performance","offers":[{"title":"Street (soft, more quiet)","offer_id":44994773811494,"sku":"JXB-B67-AUDI-CB-03","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Track (hard, louder)","offer_id":44994773844262,"sku":"JXB-B67-AUDI-CB-03","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Give me both!","offer_id":44994773877030,"sku":"JXB-B67-AUDI-CB-03","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/jxb-performance-audi-b6-driveshaft-center-support-carrier-6hp19.jpg?v=1683642232"},{"product_id":"jxb-performance-driveshaft-center-support-bearing-carrier-upgrade-audi-8n-tt-vw-mk4-r32","title":"JXB Performance Driveshaft Center Support Bearing Carrier Upgrade - Audi 8N TT, VW Mk4 R32","description":"\u003cp\u003eThe stock center support bearing carrier holds the driveshaft in place with rubber so thin that only about 20 lbs of force will move it from center to the end of its travel.  While that’s great for making sure no NVH makes it to the cabin, the stock bushing is extremely prone to failure, especially in harsher climates and on higher-powered cars.  Even on the best-kept cars, the stock rubber bushing sags, dry rots, and cracks by the time it’s 10-15 years old.  When the bushing lets go, it leads to excessive vibrations and clunking which can damage the transmission and rear diff.  To make matters worse, the stock carrier is molded onto the center support bearing, leading to costly driveshaft replacement.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eThe Bushings\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eTwo options are available for the bushings, both of which are many times stiffer than the stock bushings. JXB paid close attention to the NVH levels associated with this upgrade. We’ve engineered custom isolator bushings that separate the carrier from the body of the vehicle and mounting bolts to substantially reduce NVH levels.\u003c\/p\u003e\r\n\u003cp\u003eThe street bushings absorb most of the NVH from the drivetrain. Expect some light NVH at some speeds in the form of a soft hum. With a modified exhaust or windows down you’ll probably never hear it. Most NVH is heard between 20-40 mph. At highway speeds it fades away.\u003c\/p\u003e\r\n\u003cp\u003eThe track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise throughout the low range, again fading at higher speeds, but not entirely. Not sure which is for you? Try them both, they’re interchangeable!\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eInstallation doesn’t require removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required.\u003c\/p\u003e\r\n\u003cstyle xml=\"space\"\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\r\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/lYSkOLKslXs\" width=\"320\" height=\"240\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"JXB Performance","offers":[{"title":"Street (soft, more quiet)","offer_id":44994777841958,"sku":"R3201C1-0","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Track (hard, louder)","offer_id":44994777874726,"sku":"R3201C1-0","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Give me both!","offer_id":44994777907494,"sku":"R3201C1-0","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/jxb-performance-driveshaft-center-support-bearing-r3201c1-0.jpg?v=1683642405"}],"url":"https:\/\/store.ngpracing.com\/collections\/drivetrain-mounts\/volkswagen-gti-mk8---2022--2-0t-gen4-tsi-esi9248635.oembed","provider":"New German Performance","version":"1.0","type":"link"}