{"title":"Brake Upgrades","description":"","products":[{"product_id":"tyrolsport-brake-caliper-stiffening-kit","title":"TyrolSport Brake Caliper Stiffening Kit","description":"\u003cp\u003eTyrolSports revolutionary new Rigid Caliper Sliders limit caliper flex inherent in the stock rubber-bushed design. This flex leads to uneven pad wear and rotor deposits under hard usage. This is an inexpensive but effective way to upgrade the feel and performance of the stock brake system. Track tested and mother approved! 100% stainless steel snap rings are now standard on all kits.\u003c\/p\u003e\r\n\u003cp\u003eOne kit will cover both front calipers only. The rear brake calipers are a different design and do not need modification.\u003c\/p\u003e\r\n\u003cp\u003eWe have revised our popular brake caliper kit to now feature elongated bushings with a dust cap. This will allow more protection from the elements, especially for those of us living in the “salt belt”. All of the same great features are retained with the new design, including the price. And don’t think we skimped out on any materials. These dust caps feature a durometer hardness of 88A, as well as being able to withstand temperatures of 446 F (230 C) for up to 10 minutes. What does this mean? If you think you can melt them, you’ve lost your brakes three laps ago.\u003c\/p\u003e\r\n\u003cp\u003eFits:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e1995-1999 Mk3 VR6 Models\u003c\/li\u003e\r\n\u003cli\u003e1999.5-2005 Mk4 Golf\/Jetta\/GTI (2.0\/TDI\/VR6\/1.8T)\u003c\/li\u003e\r\n\u003cli\u003e1996 to Current Passat models (will not fit W8 models)\u003c\/li\u003e\r\n\u003cli\u003e2006-2009 Mk5 Rabbit\/Jetta\/GTI (2.0T\/3.2)\u003c\/li\u003e\r\n\u003cli\u003e2010+ Mk6 Golf\/Jetta\/GTI (2.0T\/TDI)\u003c\/li\u003e\r\n\u003cli\u003e1996-2001 Audi B5 A4 (1.8T\/2.8)\u003c\/li\u003e\r\n\u003cli\u003e1996-2004 Audi A6 (2.8)\u003c\/li\u003e\r\n\u003cli\u003e1998-2002 Audi A6 2.7T w\/ 4 brake pads (will not fit 8 pad setup)\u003c\/li\u003e\r\n\u003cli\u003e2000-2006 Audi TT (1.8T)\u003c\/li\u003e\r\n\u003cli\u003e2005.5-2008 B7 Audi A4 (2.0T\/3.2)\u003c\/li\u003e\r\n\u003cli\u003e2006+ Audi A3 (2.0T\/3.2)\u003c\/li\u003e\r\n\u003cli\u003e2010 Audi A3 TDI\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"http:\/\/tyrolsport.com\/product_inst\/Install%20Directions%20Brake%20Bushings.pdf\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePlease note: Other applications than those listed may be possible. Please \u003ca href=\"http:\/\/www.ngpracing.com\/home\/?page_id=54\"\u003econtact us\u003c\/a\u003e if your application is not listed.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"TyrolSport","offers":[{"title":"Default Title","offer_id":44897737834790,"sku":"TSRCSVW","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/tsrcsvw.jpg?v=1682129164"},{"product_id":"tyrolsport-brake-caliper-stiffening-kit-mk4-r32","title":"TyrolSport Brake Caliper Stiffening Kit - Mk4 R32","description":"\u003cp\u003eTyrolSports revolutionary new Rigid Caliper Sliders limit caliper flex inherent in the stock rubber-bushed design. This flex leads to uneven pad wear and rotor deposits under hard usage. This is an inexpensive but effective way to upgrade the feel and performance of the stock brake system. Track tested and mother approved! 100% stainless steel snap rings are now standard on all kits.\u003c\/p\u003e\r\n\u003cp\u003eOne kit will cover both front calipers only. The rear brake calipers are a different design and do not need modification.\u003c\/p\u003e\r\n\u003cp\u003eWe have revised our popular brake caliper kit to now feature elongated bushings with a dust cap. This will allow more protection from the elements, especially for those of us living in the “salt belt”. All of the same great features are retained with the new design, including the price. And don’t think we skimped out on any materials. These dust caps feature a durometer hardness of 88A, as well as being able to withstand temperatures of 446 F (230 C) for up to 10 minutes. What does this mean? If you think you can melt them, you’ve lost your brakes three laps ago.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePlease Note: The MK4 R32 bushing kit is an exclusive fit to the MK4 R32 brake caliper, and is not interchangable with other calipers. The dust cap version is not yet available for the MK4 R32. Please \u003ca href=\"http:\/\/www.ngpracing.com\/home\/?page_id=54\"\u003econtact us\u003c\/a\u003e if you are looking for the new style bushings for the MK4 R32.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"TyrolSport","offers":[{"title":"Default Title","offer_id":44897740128550,"sku":"TSBCSKVWR32","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/tsrcsvw137277202151d2d6b5b6c47.jpg?v=1682129196"},{"product_id":"tyrolsport-rigid-caliper-stiffening-kit-b8-a4-s4-a5-s5","title":"TyrolSport Rigid Caliper Stiffening Kit - B8 A4 \/ S4 \/ A5 \/ S5","description":"\u003cp\u003eThe TyrolSport Rigid Caliper Slider kit (RCS) is the newest addition to our solid brake bushing family. Machined in the USA from 954 Bronze alloy, these bushings are a precision fit to all Audi B8 front brake calipers (A4, S4, A5, S5). Caliper deflection is greatly reduced over the stock rubber bushings, allowing for even pad wear and increased brake pedal response. Our new bushing design glides freely along 303 stainless steel pins and secures with stainless snap-rings. Rubber boots reused from the stock bushings round off the RCS kit and extend maintenance intervals beyond each brake job.\u003c\/p\u003e","brand":"TyrolSport","offers":[{"title":"Default Title","offer_id":44897740194086,"sku":"TSRCSB8","price":164.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/tsrcsb8.jpg?v=1682129198"},{"product_id":"tyrolsport-brake-caliper-stiffening-kit-mk5-r32-mk6-golf-r","title":"Tyrolsport Brake Caliper Stiffening Kit - Mk5 R32, Mk6 Golf R","description":"\u003cp\u003eTyrolSports revolutionary new Rigid Caliper Sliders limit caliper flex inherent in the stock rubber-bushed design. This flex leads to uneven pad wear and rotor deposits under hard usage. This is an inexpensive but effective way to upgrade the feel and performance of the stock brake system. Track tested and mother approved! 100% stainless steel snap rings are now standard on all kits.\u003c\/p\u003e\r\n\u003cp\u003eOne kit will cover both front calipers only. The rear brake calipers are a different design and do not need modification.\u003c\/p\u003e\r\n\u003cp\u003eWe have revised our popular brake caliper kit to now feature elongated bushings with a dust cap. This will allow more protection from the elements, especially for those of us living in the “salt belt”. All of the same great features are retained with the new design, including the price. And don’t think we skimped out on any materials. These dust caps feature a durometer hardness of 88A, as well as being able to withstand temperatures of 446 F (230 C) for up to 10 minutes. What does this mean? If you think you can melt them, you’ve lost your brakes three laps ago.\u003c\/p\u003e","brand":"TyrolSport","offers":[{"title":"Default Title","offer_id":44897742946598,"sku":"TSBCSKVWR","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/8669_tsrcsvw137277202151d2d6b5b6c47.jpg?v=1682129286"},{"product_id":"vagbremtechnic-porsche-boxster-312mm-caliper-adapter-kit","title":"VAGBremtechnic Porsche Boxster 312mm Caliper Adapter Kit","description":"\u003cp\u003eThis front brake adaption kit allows the fitment of Porsche Boxster Calipers to most VW and Audi factory 312mm brake discs (see below for required parts \u0026amp; part numbers). This kit is perfect for those looking to upgrade their calipers while sticking with the factory 312mm rotor size due to possible size or weight constraints.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThis adapter kit does not include brake lines. If you are in need of brake lines for your swap, please \u003ca rel=\"noopener\" title=\"Contact Us\" href=\"\/contact-us\" target=\"_blank\"\u003econtact us\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in this kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e2x Caliper carriers\u003c\/li\u003e\n\u003cli\u003e4x Caliper to carrier bolts\u003c\/li\u003e\n\u003cli\u003e4x Spring washers for caliper to carrier bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTo complete this front brake kit you will need:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e2x Porsche Boxster calipers (Part No’s: 986.351.421 \/ 986.351.422)\u003c\/li\u003e\n\u003cli\u003e2x 312mm front brake discs (Part No: 1K0615301AA)\u003c\/li\u003e\n\u003cli\u003e2x M10x1.0 banjo bolts*\u003c\/li\u003e\n\u003cli\u003e1x Set of brake pads to suit your driving style\u003c\/li\u003e\n\u003cli\u003eBrake fluid to flush system when installing\u003c\/li\u003e\n\u003cli\u003eBrake Lines or new banjo bolts*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cem\u003e*If your factory equipped brakes use a banjo fitting, you may re-use your brake lines, but you must use new M10x1.0 banjo bolts with the lines. This is because the thread pitch is different between VW and Porsche brake calipers.\u003c\/em\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e2006-2009 VW Mk5 Rabbit, Jetta, GTI, GLI, Eos\u003c\/li\u003e\n\u003cli\u003e2010-2014 VW Mk6 Golf, GTI, Eos\u003c\/li\u003e\n\u003cli\u003e2012-2017 VW Mk6 Jetta, GLI\u003c\/li\u003e\n\u003cli\u003e2015-2021 VW Mk7 Golf, GTI\u003c\/li\u003e\n\u003cli\u003e2006-2014 Audi 8P A3\u003c\/li\u003e\n\u003cli\u003e2015-2020 Audi 8V A3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eModels with aluminum knuckles\/uprights\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your vehicle has aluminum steering knuckles (also known as spindles or uprights), unfortunately this kit will not work with your application. This is because measurements of this kit were designed around models that use steel knuckle assemblies, which aren't as thick as the aluminum versions. Typically, the more \"premium\" models such as the Passat, CC, Tiguan and S3\/TT models come equipped with the aluminum knuckles from the factory. If you need any assistance in identifying which steering knuckle you have on your vehicle, please feel free to contact us.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eThis brake kit is not designed for use on public streets or roads. Off-road use only.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Vagbremtechnic","offers":[{"title":"No Thanks","offer_id":47384425890086,"sku":"AK0002","price":249.99,"currency_code":"USD","in_stock":false},{"title":"Textar Coated","offer_id":47384425922854,"sku":"AK0002","price":399.98,"currency_code":"USD","in_stock":true},{"title":"Zimmerman Z-Coat","offer_id":47384425955622,"sku":"AK0002","price":409.98,"currency_code":"USD","in_stock":true},{"title":"Zimmerman Z-Coat X-drilled","offer_id":47384425988390,"sku":"AK0002","price":469.98,"currency_code":"USD","in_stock":true},{"title":"Stoptech Slotted","offer_id":47384426021158,"sku":"AK0002","price":627.43,"currency_code":"USD","in_stock":true},{"title":"Stoptech Cryo Treated Slotted","offer_id":47384426053926,"sku":"AK0002","price":674.47,"currency_code":"USD","in_stock":true},{"title":"Stoptech X-Drilled and Slotted","offer_id":47384426086694,"sku":"AK0002","price":653.05,"currency_code":"USD","in_stock":true},{"title":"Stoptech X-Drilled","offer_id":47384426119462,"sku":"AK0002","price":745.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/files\/vbt-ak0002-boxster-caliper-adapter-kit.jpg?v=1703271333"},{"product_id":"ttrs-clubsport-340mm-brake-kit","title":"TTRS Clubsport 340mm Brake Kit","description":"\u003cp\u003e\u003cstrong\u003eThe ultimate OEM+ brake kit\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eWe've combined two of our favorite brake upgrade kits to create the ultimate OEM+ brake upgrade kit. This package takes the VAGBremtechnic TTRS Brake Caliper Adapter Kit - which allows you to use the 4-piston Brembo brake calipers from the 8J Audi TTRS with factory 340mm brake rotors - and has paired it with the ultimate in OEM VW\/Audi brake rotors: 340mm Mk7 GTI Clubsport S rotors. The Clubsport brake rotors utilize the same great looking semi-two-piece hatted design as the 370mm TTRS rotors, albeit in a smaller and lighter package. All you'll need to complete this kit are the TTRS calipers themselves and pads (available as an option above).\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePlease note that this kit does not include brake calipers. If you are looking for a kit that comes complete with brake calipers, please check out the \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca title=\"Vagbremtechnic Brembo 4 Piston Big Brake Kit\" href=\"\/vagbremtechnic-brembo-4-piston-big-brake-kit-fits-vw-mk5-mk6-mk7-b6-b7-audi-8p-8v-8j.html\" target=\"_blank\"\u003eVagbremtechnic Brembo 4 Piston Big Brake Kit instead\u003c\/a\u003e\u003c\/span\u003e.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBigger isn't always better\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe 4 piston Brembo brakes that came on the 8J TTRS are hands down the best OEM brake upgrade available for several vehicles in the VAG lineup. However, they suffer from one big problem: their massive 370mm one-off brake rotors.\u003c\/p\u003e\r\n\u003cp\u003eDue to their massive size, factory TTRS rotors push the calipers very far toward the inner barrel of the wheel. This prohibits you from using most 18\" and smaller aftermarket wheels.\u003c\/p\u003e\r\n\u003cp\u003eInstallation of the VAGBremtechnic TTRS Caliper Adapter Kit is easy: simply remove the factory mounting bracket from your calipers and install the new mounting brackets. Once installed, simply install the TTRS calipers to your vehicle as you normally would and install the supplied Clubsport S brake rotors.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e2 VAGBremtechnic TTRS brake caliper adaptors\u003c\/li\u003e\r\n\u003cli\u003e2 OEM VW Mk7 GTI Clubsport S brake rotors\u003c\/li\u003e\r\n\u003cli\u003e2 TTRS braided stainless brake lines\u003c\/li\u003e\r\n\u003cli\u003eMounting hardware\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBrake calipers are not included with this kit. If you would like to order this kit with brake calipers, please check out the \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca title=\"Vagbremtechnic Brembo 4 Piston Big Brake Kit\" href=\"\/vagbremtechnic-brembo-4-piston-big-brake-kit-fits-vw-mk5-mk6-mk7-b6-b7-audi-8p-8v-8j.html\" target=\"_blank\"\u003eVagbremtechnic Brembo 4 Piston Big Brake Kit instead\u003c\/a\u003e\u003c\/span\u003e.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWeight comparison\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003eFactory 340x30mm disc - 23.6 lbs (per disc)\u003c\/li\u003e\r\n\u003cli\u003eClubsport S 340x30mm disc - 21.6 (per disc)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003eVW Mk5 Rabbit, Jetta, GTI, GLI, Eos\u003c\/li\u003e\r\n\u003cli\u003eVW Mk6 Golf, Jetta, GTI, GLI, Eos\u003c\/li\u003e\r\n\u003cli\u003eVW Mk7 Golf, GTI, Golf R\u003c\/li\u003e\r\n\u003cli\u003eVW Mk7 Golf Sportwagen, Alltrack\u003c\/li\u003e\r\n\u003cli\u003eVW Tiguan\u003c\/li\u003e\r\n\u003cli\u003eVW B6 Passat\u003c\/li\u003e\r\n\u003cli\u003eVW B6 CC\u003c\/li\u003e\r\n\u003cli\u003eAudi 8P A3\u003c\/li\u003e\r\n\u003cli\u003eAudi 8V A3, S3\u003c\/li\u003e\r\n\u003cli\u003eAudi 8J TT, TTS, TTRS\u003c\/li\u003e\r\n\u003cli\u003eAudi 8S TT, TTS\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePlease note: The rotors in this kit are the same for both the left and the right side with no change in vane direction. They are designed this way by VW.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Vagbremtechnic","offers":[{"title":"No thanks","offer_id":44898406793510,"sku":"AK0003\/5Q0615301C","price":975.0,"currency_code":"USD","in_stock":false},{"title":"Hawk HPS","offer_id":44898406826278,"sku":"AK0003\/5Q0615301C","price":1124.99,"currency_code":"USD","in_stock":false},{"title":"EBC Redstuff","offer_id":44898406859046,"sku":"AK0003\/5Q0615301C","price":1107.05,"currency_code":"USD","in_stock":false},{"title":"EBC Yellowstuff","offer_id":44898406891814,"sku":"AK0003\/5Q0615301C","price":1107.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/ttrs-mini-kit.jpg?v=1682141953"},{"product_id":"vagbremtechnic-front-2-piece-362x32mm-disc-upgrade-kit","title":"Vagbremtechnic Front 2-Piece 362x32mm Disc Upgrade Kit","description":"\u003cp\u003eThis Vagbremtechnic disc installation kit comes with everything you need to install their two piece 362x32mm set up which, when matched with their 335mm rear upgrade kit, provides a much better balanced car under braking compared to the stock 370mm front discs and 310mm rear discs.\u003c\/p\u003e\r\n\u003cp\u003eThe caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to Vagbremtechnic's specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either a grooved or drilled. Matched with the Vagbremtechnic lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly. The float is in the disc bell rather than the disc itself. Lastly, the fitment kit includes new bolts that are high tensile M12x1.25 and are coupled with quality spring washers.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIncluded in our kit:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e2x Caliper carriers\u003c\/li\u003e\r\n\u003cli\u003e2x 362x32 2 piece front brake discs\u003c\/li\u003e\r\n\u003cli\u003e1x Braided front brake lines\u003c\/li\u003e\r\n\u003cli\u003e4x Caliper to carrier bolts\u003c\/li\u003e\r\n\u003cli\u003e4x Spring washers for caliper to carrier bolts\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTo complete this front brake kit you will need:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e8J TTRS brake calipers\u003c\/li\u003e\r\n\u003cli\u003e1x Set of brake pads to suit your driving style\u003c\/li\u003e\r\n\u003cli\u003eBrake fluid to flush system when installing\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eWeight Per Disc:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul class=\"bullet\"\u003e\r\n\u003cli\u003e8.6kg (18.96 lbs)\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Vagbremtechnic","offers":[{"title":"Grooved","offer_id":44994783117606,"sku":"DI0003-TTRS","price":1379.99,"currency_code":"USD","in_stock":false},{"title":"Drilled","offer_id":44994783150374,"sku":"DI0003-TTRS","price":1599.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/di0003-8j-ttrs-362mm-brake-disc-upgrade-kit_1.jpg?v=1683642558"},{"product_id":"neuspeed-2-piece-brake-rotor-kit-rear-350mm-vw-mk8-mk7-mk7-5-golf-r-arteon-atlas-audi-8v-s3-rs3-8s-tts-ttrs","title":"NEUSPEED 2-Piece Brake Rotor Kit - Rear 350mm - VW Mk7, Mk7.5 Golf R, Arteon, Atlas, Audi 8V S3, RS3, 8S TTS, TTRS","description":"\u003cp\u003eSimilar to the NEUSPEED 370mm Front Rotor Kit, this 350mm Rear Rotor kit also features 2pc Full-Floating construction but with a CNC 7075-T6 billet aluminum hat. The entire rotor is designed specifically for the VW\/AUDI MQB platform. It has the correct rotor offset, bolt pitch diameter, as well as hub holding screw, unlike others that use Mercedes SUV steel rotor with different offset, much heavier weight, and require spacer or hub ring to get the rotor concentric to the wheel bearing.\u003c\/p\u003e\n\u003cp\u003eThe increased rotor diameter from 310mm to 350mm provides more friction surface and material for better heat dissipation. It also increases brake torque leverage improving rear braking without the need to mess around with brake bias.\u003c\/p\u003e\n\u003cp\u003eAnother feature that separates the NEUSPEED kit from others is its caliper carrier. It is cast using high-quality steel grade material and CNC machined to factory specs with the correct spacing for the larger rotor diameter. This is a complete carrier replacement and not some weak aluminum adapter spacer that requires additional bolts, adding unnecessary hardware to the assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eRotor Size: 350x22mm - (OEM 310x22mm)\u003c\/li\u003e\n\u003cli\u003eRotor Weight: 14.8 lbs. - (OEM: 15.1 lbs.)\u003c\/li\u003e\n\u003cli\u003e7075-T6 Alloy Hat (compared to competitors 6061-T6)\u003c\/li\u003e\n\u003cli\u003eStainless Steel H-Bobbin Hardware\u003c\/li\u003e\n\u003cli\u003eSlotted Pattern, Directional and Curved Veins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eVW Arteon\u003c\/li\u003e\n\u003cli\u003eVW Atlas\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVW Golf R (Mk7\/7.5)\u003c\/li\u003e\n\u003cli\u003eAudi S3 (8V\/8V.5)\u003c\/li\u003e\n\u003cli\u003eAudi RS3 (8V\/8V.5)\u003c\/li\u003e\n\u003cli\u003eAudi TTS (8S\/8S.5)\u003c\/li\u003e\n\u003cli\u003eAudi TTRS (8S\/8S.5)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e2x Caliper Carriers (Black or Red Option)\u003c\/li\u003e\n\u003cli\u003e1x Left Slotted rotor\u003c\/li\u003e\n\u003cli\u003e1x Right Slotted rotor\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Neuspeed","offers":[{"title":"Black - 99.10.49B","offer_id":44994932605222,"sku":"99.10.49","price":1139.05,"currency_code":"USD","in_stock":true},{"title":"Red - 99.10.49R","offer_id":44994932637990,"sku":"99.10.49","price":1139.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/99.10.49b_img2_800x600_81445a5f-4d0a-411a-a8d4-735911237a51.jpg?v=1683646118"},{"product_id":"034motorsport-titanium-brake-pad-shim-kit-for-b9-b9-5-audi-s4-s5-sq5-rs5","title":"034Motorsport Titanium Brake Pad Shim Kit for B9\/B9.5 Audi S4\/S5\/SQ5\/RS5","description":"\u003cp\u003eFor those that use their brakes to the maximum either on the road, and especially those that take their car to the track, 034Motorsport engineers developed an additional heat-blocking upgrade in the form of Titanium Brake Pad Shims for the RS+ Big Brake Package. Positioned between the brake pad and caliper, titanium shims’ low thermal conductivity reduces heat transfer from the Brake Pads and Rotors into the Caliper, preventing brake fluid overheating and brake fade during intense track use. This upgrade enhances safety and brake modulation, while extending the lifespan of components like caliper seals, lowering long-term maintenance costs. Additionally, titanium shims help minimize brake squeal, providing quiet and reliable performance. We highly recommend adding this option during checkout if you are looking to get the most performance out of your braking system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Heat Management Upgrade To Improve Braking Performance For Track And Race Applications.\u003c\/li\u003e\n\u003cli\u003eMade Of High-Quality Grade 5 Titanium (6AL-4V \/ ASTM B348).\u003c\/li\u003e\n\u003cli\u003eFits Between The Brake Pads And Calipers, And Can Act As An Effective Thermal Barrier Due To The Significantly Lower Thermal Conductivity Of Titanium.\u003c\/li\u003e\n\u003cli\u003eImproved Safety By Help Prevent Brake Fade And Failure\u003c\/li\u003e\n\u003cli\u003eThickness: 0.5mm (0.02\")\u003c\/li\u003e\n\u003cli\u003eReduced Noise (Anti-Squeal)\u003c\/li\u003e\n\u003cli\u003eRecommended For Street \/ Track Use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\/Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A6 2019-Present C8 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi A7 2019-Present C8 3.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi A8 2019-Present D5 3.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi allroad 2019-Present C8 3.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi Q5 2018-Present B9\/B9.5 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi Q7 2015-Present 4M\/4M.5 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi Q7 2015-Present 4M\/4M.5 3.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi Q8 2019-Present 4M8 3.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi RS4 2018-Present B9\/B9.5 2.9 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi RS5 2018-Present B9\/B9.5 2.9 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi S4 2018-Present B9 3.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi S5 2018-Present B9\/B9.5 3.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi SQ5 2018-Present B9\/B9.5 3.0 TFSI\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":49669770608934,"sku":"034-3ZZ-0008","price":141.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/files\/034motorsport-titanium-brake-pad-shim-kit-for-b9-b9-5-audi-s4-s5-sq5-rs5-034-3zz-0008-1.webp?v=1728503638"},{"product_id":"034motorsport-titanium-brake-pad-shim-kit-for-rs-big-brake-package-034-3zz-0007","title":"034Motorsport Titanium Brake Pad Shim Kit for RS+ Big Brake Package","description":"\u003cp\u003eFor those that use their brakes to the maximum either on the road, and especially those that take their car to the track, 034Motorsport engineers developed an additional heat-blocking upgrade in the form of Titanium Brake Pad Shims for the RS+ Big Brake Package. Positioned between the brake pad and caliper, titanium shims’ low thermal conductivity reduces heat transfer from the Brake Pads and Rotors into the Caliper, preventing brake fluid overheating and brake fade during intense track use. This upgrade enhances safety and brake modulation, while extending the lifespan of components like caliper seals, lowering long-term maintenance costs. Additionally, titanium shims help minimize brake squeal, providing quiet and reliable performance. We highly recommend adding this option during checkout if you are looking to get the most performance out of your braking system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Heat Management Upgrade To Improve Braking Performance For Track And Race Applications.\u003c\/li\u003e\n\u003cli\u003eMade Of High-Quality Grade 5 Titanium (6AL-4V \/ ASTM B348).\u003c\/li\u003e\n\u003cli\u003eFits Between The Brake Pads And Calipers, And Can Act As An Effective Thermal Barrier Due To The Significantly Lower Thermal Conductivity Of Titanium.\u003c\/li\u003e\n\u003cli\u003eImproved Safety By Help Prevent Brake Fade And Failure\u003c\/li\u003e\n\u003cli\u003eThickness: 0.5mm (0.02\")\u003c\/li\u003e\n\u003cli\u003eReduced Noise (Anti-Squeal)\u003c\/li\u003e\n\u003cli\u003eRecommended For Street \/ Track Use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFITMENT\/APPLICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A4 2017-Present B9\/B9.5 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi A5 2018-Present B9\/B9.5 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi A4 Allroad 2017-Present B9\/B9.5 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi Q5 2018-Present B9\/B9.5 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi Q7 2015-Present 4M\/4M.5 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi Q7 2015-Present 4M\/4M.5 3.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi RS4 2018-Present B9\/B9.5 2.9 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi RS5 2018-Present B9\/B9.5 2.9 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi S4 2018-Present B9\/B9.5 3.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi S5 2018-Present B9\/B9.5 3.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi SQ5 2018-Present B9\/B9.5 3.0 TFSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eFits the above models equipped with the \u003ca title=\"034Motorsport RS+ Big Brake Kit\" href=\"\/products\/034motorsport-rs-big-brake-package-b9-b9-5-audi-a4-s4-rs4-a5-s5-rs5-q5-sq5-034-301-0003\" target=\"_blank\"\u003e034Motorsport RS+ Big Brake Kit\u003c\/a\u003e only!\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":49691536294182,"sku":"034-3ZZ-0007","price":141.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/files\/034motorsport-titanium-brake-pad-shim-kit-for-rs-big-brake-package-034-3zz-0007-1.webp?v=1729102502"},{"product_id":"tyrolsport-brake-caliper-stiffening-kit-open-box","title":"TyrolSport Brake Caliper Stiffening Kit - Open Box","description":"\u003cp\u003eTyrolSports revolutionary new Rigid Caliper Sliders limit caliper flex inherent in the stock rubber-bushed design. This flex leads to uneven pad wear and rotor deposits under hard usage. This is an inexpensive but effective way to upgrade the feel and performance of the stock brake system. Track tested and mother approved! 100% stainless steel snap rings are now standard on all kits.\u003c\/p\u003e\r\n\u003cp\u003eOne kit will cover both front calipers only. The rear brake calipers are a different design and do not need modification.\u003c\/p\u003e\r\n\u003cp\u003eWe have revised our popular brake caliper kit to now feature elongated bushings with a dust cap. This will allow more protection from the elements, especially for those of us living in the “salt belt”. All of the same great features are retained with the new design, including the price. And don’t think we skimped out on any materials. These dust caps feature a durometer hardness of 88A, as well as being able to withstand temperatures of 446 F (230 C) for up to 10 minutes. What does this mean? If you think you can melt them, you’ve lost your brakes three laps ago.\u003c\/p\u003e\r\n\u003cp\u003eFits:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e1995-1999 Mk3 VR6 Models\u003c\/li\u003e\r\n\u003cli\u003e1999.5-2005 Mk4 Golf\/Jetta\/GTI (2.0\/TDI\/VR6\/1.8T)\u003c\/li\u003e\r\n\u003cli\u003e1996 to Current Passat models (will not fit W8 models)\u003c\/li\u003e\r\n\u003cli\u003e2006-2009 Mk5 Rabbit\/Jetta\/GTI (2.0T\/3.2)\u003c\/li\u003e\r\n\u003cli\u003e2010+ Mk6 Golf\/Jetta\/GTI (2.0T\/TDI)\u003c\/li\u003e\r\n\u003cli\u003e1996-2001 Audi B5 A4 (1.8T\/2.8)\u003c\/li\u003e\r\n\u003cli\u003e1996-2004 Audi A6 (2.8)\u003c\/li\u003e\r\n\u003cli\u003e1998-2002 Audi A6 2.7T w\/ 4 brake pads (will not fit 8 pad setup)\u003c\/li\u003e\r\n\u003cli\u003e2000-2006 Audi TT (1.8T)\u003c\/li\u003e\r\n\u003cli\u003e2005.5-2008 B7 Audi A4 (2.0T\/3.2)\u003c\/li\u003e\r\n\u003cli\u003e2006+ Audi A3 (2.0T\/3.2)\u003c\/li\u003e\r\n\u003cli\u003e2010 Audi A3 TDI\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"http:\/\/tyrolsport.com\/product_inst\/Install%20Directions%20Brake%20Bushings.pdf\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePlease note: Other applications than those listed may be possible. Please \u003ca href=\"http:\/\/www.ngpracing.com\/home\/?page_id=54\"\u003econtact us\u003c\/a\u003e if your application is not listed.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"TyrolSport","offers":[{"title":"Default Title","offer_id":49845237743910,"sku":"TSRCSVW","price":89.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/tsrcsvw.jpg?v=1682129164"},{"product_id":"tyrolsport-rigid-caliper-stiffening-kit-b8-a4-s4-a5-s5-open-box","title":"TyrolSport Rigid Caliper Stiffening Kit - B8 A4 \/ S4 \/ A5 \/ S5 - Open Box","description":"\u003cp\u003eThe TyrolSport Rigid Caliper Slider kit (RCS) is the newest addition to our solid brake bushing family. Machined in the USA from 954 Bronze alloy, these bushings are a precision fit to all Audi B8 front brake calipers (A4, S4, A5, S5). Caliper deflection is greatly reduced over the stock rubber bushings, allowing for even pad wear and increased brake pedal response. Our new bushing design glides freely along 303 stainless steel pins and secures with stainless snap-rings. Rubber boots reused from the stock bushings round off the RCS kit and extend maintenance intervals beyond each brake job.\u003c\/p\u003e","brand":"TyrolSport","offers":[{"title":"Default Title","offer_id":49845238530342,"sku":"TSRCSB8","price":131.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/products\/tsrcsb8.jpg?v=1682129198"},{"product_id":"neuspeed-2-piece-brake-rotor-kit-rear-350mm-vw-mk8-gti-golf-r-audi-8y-s3-rs3","title":"NEUSPEED 2-Piece Brake Rotor Kit - Rear 350mm - VW Mk8 GTI, Golf R, Audi 8Y S3, RS3","description":"\u003cp\u003eSimilar to the NEUSPEED 370mm Front Rotor Kit, this 350mm Rear Rotor kit also features 2pc Full-Floating construction but with a CNC 7075-T6 billet aluminum hat. The entire rotor is designed specifically for the VW\/AUDI MQB evo platform. It has the correct rotor offset, bolt pitch diameter, as well as hub holding screw, unlike others that use Mercedes SUV steel rotor with different offset, much heavier weight, and require spacer or hub ring to get the rotor concentric to the wheel bearing.\u003c\/p\u003e\n\u003cp\u003eThe increased rotor diameter from 310mm to 350mm provides more friction surface and material for better heat dissipation. It also increases brake torque leverage improving rear braking without the need to mess around with brake bias.\u003c\/p\u003e\n\u003cp\u003eAnother feature that separates the NEUSPEED kit from others is its caliper carrier. It is cast using high-quality steel grade material and CNC machined to factory specs with the correct spacing for the larger rotor diameter. This is a complete carrier replacement and not some weak aluminum adapter spacer that requires additional bolts, adding unnecessary hardware to the assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eRotor Size: 350x22mm - (OEM 310x22mm)\u003c\/li\u003e\n\u003cli\u003eRotor Weight: 14.8 lbs. - (OEM: 15.1 lbs.)\u003c\/li\u003e\n\u003cli\u003e7075-T6 Alloy Hat (compared to competitors 6061-T6)\u003c\/li\u003e\n\u003cli\u003eStainless Steel H-Bobbin Hardware\u003c\/li\u003e\n\u003cli\u003eSlotted Pattern, Directional and Curved Veins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGolf GTI (Mk8\/Mk8.5)\u003c\/li\u003e\n\u003cli\u003eVW Golf R (Mk8\/Mk8.5)\u003c\/li\u003e\n\u003cli\u003eAudi S3 (8Y\/8Y.5)\u003c\/li\u003e\n\u003cli\u003eAudi RS 3 (8Y\/8Y.5)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003e2x Caliper Carriers (Black or Red Option)\u003c\/li\u003e\n\u003cli\u003e1x Left Slotted rotor\u003c\/li\u003e\n\u003cli\u003e1x Right Slotted rotor\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Neuspeed","offers":[{"title":"Blue - 99.10.51BL","offer_id":49860344381734,"sku":"99.10.51","price":1139.05,"currency_code":"USD","in_stock":true},{"title":"Red - 99.10.51R","offer_id":49860344414502,"sku":"99.10.51","price":1139.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/files\/neuspeed-blue-red-rear-upgrade-kit.webp?v=1733262654"},{"product_id":"034motorsport-2-piece-floating-front-brake-rotor-375mm-upgrade-for-mk8-golf-r-audi-8y-s3","title":"034Motorsport 2-Piece Floating Front Brake Rotor 375mm Upgrade for Mk8 Golf R \u0026 Audi 8Y S3","description":"\u003cp\u003eThe 034Motorsport 375x34mm 2-Piece Floating Front Brake Rotor Upgrade for MK8 Golf R \u0026amp; Audi 8Y S3 is a complete replacement brake rotor and caliper carrier kit, designed to work flawlessly with the factory front calipers. Upgrading your rotors will increase overall braking performance in street, track, and HDPE driving conditions, as they keep your brakes cool and strong all day long!\u003cbr\u003e\u003cbr\u003eWeighing in at approximately 26.0lbs, each rotor reduces rotational weight by 1.3lbs on each corner over the factory 27.3lb rotors and increases rotor diameter from 357mm to 375mm! This increases stopping power and reduces rotational weight! While reducing weight, the rotor retains proper thermal mass in the rings to adequately capture, and dissipate heat.\u003cbr\u003e\u003cbr\u003eThe central hat portion of the 034Motorsport rotor is made of 6061-T6 aircraft specification aluminum. The disc is constructed out of a proprietary metal alloy that can withstand immense braking temperatures while holding form. The 034Motorsport 2-Piece Floating Front Brake Rotor Upgrade Kit utilizes 72 directionally curved vanes properly oriented for each side of the vehicle to forcefully flow cool air through both rotors to dissipate heat equally.\u003cbr\u003e\u003cbr\u003eThe face of the rotor utilizes J-Slot slots to clean the pad surface of contaminants and allows hot pad outgassing.\u003cbr\u003e\u003cbr\u003eThe rotor and hat have a floating mount system that utilizes high strength alloy steel bobbins. The pins take the load from braking actions while maintaining the axial and radial float between the hat and disc, allowing for safe expansion and contraction from heat.\u003c\/p\u003e\n\u003ch3\u003eFEATURES:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight Construction (26lb 375mm 034Motorsport Rotor vs. 27.3lb 357mm OE Rotor)\u003c\/li\u003e\n\u003cli\u003eIncludes Replacement Painted Caliper Carrier to Accommodate Larger 375mm Brake Rotor\u003c\/li\u003e\n\u003cli\u003eFits Under Most 18\" Wheel Designs \u0026amp; OE Wheels\u003c\/li\u003e\n\u003cli\u003eFloating, 2-Piece Design\u003c\/li\u003e\n\u003cli\u003eAerospace Grade Aluminum Hats with Type III Hard Anodizing**\u003c\/li\u003e\n\u003cli\u003eCM-250 Special Alloy Rotor Rings\u003c\/li\u003e\n\u003cli\u003eJ-Slot Slotted Friction Face\u003c\/li\u003e\n\u003cli\u003eOEM Fitment \u0026amp; Functionality\u003c\/li\u003e\n\u003cli\u003e72 Curved Vanes Force Cooling Air through Brake Disc\u003c\/li\u003e\n\u003cli\u003eFloating Bobbins Mounting System\u003c\/li\u003e\n\u003cli\u003eReplaceable Rotor Rings\u003c\/li\u003e\n\u003cli\u003eLower Long-term Maintenance Cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBraking Performance Improvements:\u003c\/h3\u003e\n\u003cp\u003e034Motorsport conducted 14 consecutive 60mph-0mph braking events and measured the temperatures of all four brake rotors. From the factory, the same rotor is used on both sides of the S3 \u0026amp; Golf R, leading to one side having incorrect venting and cooling effects, leading to up to an 80°f temperature differential between left and right rotor.\u003cbr\u003e\u003cbr\u003eAfter installing the 034Motorsport Upgraded 2-Piece Brake Rotors, both left \u0026amp; right rotors increase in heat more evenly throughout all 14 consecutive braking events. By increasing thermal mass and improving the cooling, the 034Motorsport 2-Piece Brake Rotors stay nearly 140°f cooler than the factory rotors in similar testing conditions with the same brake pads.\u003c\/p\u003e\n\u003ch3\u003eWHAT'S INCLUDED:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e375x34mm 034Motorsport 2-Piece Floating Front Rotor Pair\u003c\/li\u003e\n\u003cli\u003eCaliper Carrier Conversion Brackets (Red or Blue)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\/Applications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2022+ VW Mk8 Golf R\u003c\/li\u003e\n\u003cli\u003e2022+ Audi 8Y S3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ci\u003e**Please Note: Type III hard anodizing of aluminum is considered as a functional surface coating process. While we always aim for color consistency, color variations may exist from batch to batch due to the nature and variables in the anodizing process.\u003c\/i\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Red","offer_id":49944517837094,"sku":"034-301-1012-RED\/BLU","price":1379.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":49944517869862,"sku":"034-301-1012-RED\/BLU","price":1379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/files\/2-piece-floating-front-brake-rotor-375mm-upgrade-for-mk8-golf-r-and-audi-8y-s3-034-301-1012-1_1.webp?v=1735573654"},{"product_id":"034motorsport-2-piece-floating-rear-brake-rotor-355mm-upgrade-for-mk8-gti-golf-r-audi-8y-s3-rs3","title":"034Motorsport 2-Piece Floating Rear Brake Rotor 355mm Upgrade for Mk8 GTI\/Golf R \u0026 Audi 8Y S3\/RS3","description":"\u003cp\u003eThe 034Motorsport 355x22mm 2-Piece Floating Rear Brake Rotor Upgrade for MK8 Golf R\/GTI \u0026amp; Audi 8Y S3\/RS3 is a complete replacement brake rotor and caliper carrier kit, designed to work flawlessly with the factory rear calipers. Upgrading your rotors will increase overall braking performance in street, track, and HDPE driving conditions, as they keep your brakes cool and strong all day long!\u003cbr\u003e\u003cbr\u003eWeighing in at approximately 13.5lbs, each rotor reduces rotational weight by 1.5lb on each corner over the factory 15.0lb rotors, and increases rotor diameter from 310mm to 355mm! This increases stopping power and reduces rotational weight! While reducing weight, the rotor retains proper thermal mass in the rings to adequately capture, and dissipate heat.\u003cbr\u003e\u003cbr\u003eThe central hat portion of the 034Motorsport rotor is made of 6061-T6 aircraft specification aluminum. The disc is constructed out of a proprietary metal alloy that can withstand immense braking temperatures while holding form. The rotor utilizes 72 directionally curved vanes to forcefully flow cool air through the rotor to dissipate heat.\u003cbr\u003e\u003cbr\u003eThe face of the rotor utilizes J-Slot slots to clean the pad surface of contaminants and allows hot pad outgassing.\u003cbr\u003e\u003cbr\u003eThe rotor and hat have a floating mount system that utilizes high strength alloy steel bobbins. The pins take the load from braking actions while maintaining the axial and radial float between the hat and disc, allowing for safe expansion and contraction from heat.\u003c\/p\u003e\n\u003ch3\u003eFEATURES:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight Construction (13.5lb 355mm 034Motorsport Rotor vs. 15.0lb 310mm OE Rotor)\u003c\/li\u003e\n\u003cli\u003eFloating, 2-Piece Design\u003c\/li\u003e\n\u003cli\u003eAerospace Grade Aluminum Hats with Type III Hard Anodizing**\u003c\/li\u003e\n\u003cli\u003eCM-250 Special Alloy Rotor Rings\u003c\/li\u003e\n\u003cli\u003eJ-Slot Slotted Friction Face\u003c\/li\u003e\n\u003cli\u003eOEM Fitment \u0026amp; Functionality\u003c\/li\u003e\n\u003cli\u003e72 Curved Vanes Force Cooling Air through Brake Disc\u003c\/li\u003e\n\u003cli\u003eFloating Bobbins Mounting System\u003c\/li\u003e\n\u003cli\u003eReplaceable Rotor Rings\u003c\/li\u003e\n\u003cli\u003eLower Long-term Maintenance Cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWHAT'S INCLUDED:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e355x22mm 034Motorsport 2-Piece Floating Rear Rotor Pair\u003c\/li\u003e\n\u003cli\u003eCaliper Carrier Conversion Brackets (Red or Blue)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFITMENT\/APPLICATIONS:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi S3 2022-Present 8Y 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eAudi RS3 2022-Present 8Y 2.5 TFSI\u003c\/li\u003e\n\u003cli\u003eVW Golf R 2021-Present Mk8 2.0T Gen4\u003c\/li\u003e\n\u003cli\u003eVW GTI 2022-Present Mk8 2.0T Gen4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ci\u003e**Please Note: Type III hard anodizing of aluminum is considered as a functional surface coating process. While we always aim for color consistency, color variations may exist from batch to batch due to the nature and variables in the anodizing process.\u003c\/i\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Red","offer_id":49944546148646,"sku":"034-301-2012-RED\/BLU","price":1229.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":49944546181414,"sku":"034-301-2012-RED\/BLU","price":1229.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/files\/2-piece-floating-rear-brake-rotor-355mm-upgrade-for-mk8-golf-r-and-audi-8y-s3-034-301-2012-1_1_3fa2cfc7-c4cc-4932-b678-f9220d1892e6.webp?v=1735574311"},{"product_id":"034motorsport-dynamic-braking-packages-8v-5-audi-rs3-2-5-tfsi-evo","title":"034Motorsport Dynamic+ Braking Packages, 8V.5 Audi RS3 2.5 TFSI EVO","description":"\u003cp\u003e034Motorsport Dyanmic+ Braking Packages contain staged upgrade packages specifically tailored for the 8V.5 Audi RS3 2.5 TFSI EVO. The 034Motorsport Dynamic+ Braking Packages contain curated products from the expansive 034Motorsport catalog, put together by the experienced 034Motorsport Engineering Team to offer staged braking upgrades to best optimize braking performance of the 8V.5 RS3.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTAGE 1 DYNAMIC+ BRAKING PACKAGE:\u003c\/strong\u003e\u003cbr\u003eLooking to upgrade your braking performance after cooking the rotors on your 8V.5 RS3? Kill two birds with one stone and replace your worn-out rotors while also improving braking performance with the Stage 1 Dynamic+ Braking Package! With 034Motorsport Front and Rear 2-Piece Floating Brake Rotors, experience consistent and prolonged braking performance thanks to their lightweight 2-piece design, which utilizes 72 directionally curved vanes to forcefully flow cool air through the rotor to dissipate heat. With stainless steel braided brake lines, pedal feel is improved as they don’t bulge or expand with brake pressure, further improving braking consistency and feel, especially at the limit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCONTENTS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-Piece Floating Front Brake Rotor Upgrade Kit for Audi 8V.5 RS3\u003c\/li\u003e\n\u003cli\u003e2-Piece Floating Rear Brake Rotor 310mm Upgrade for MQB and MQB EVO VW \u0026amp; Audi\u003c\/li\u003e\n\u003cli\u003eStainless Steel Braided Brake Line Kit, 8S\/8V.5 Audi TT RS \u0026amp; RS3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e034Motorsport 2-Piece Floating Rotors Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight Construction\n\u003cul\u003e\n\u003cli\u003eFront Rotors: (22lb 034Motorsport Rotor vs. 27.3lb OE Audi Rotor)\u003c\/li\u003e\n\u003cli\u003eRear Rotors: (11.30lb 034Motorsport Rotor vs. 15.00lb OE Rotor)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFloating, 2-Piece Design\u003c\/li\u003e\n\u003cli\u003eAerospace Grade Aluminum Hats with Type III Hard Anodizing**\u003c\/li\u003e\n\u003cli\u003eCM-250 Special Alloy Rotor Rings\u003c\/li\u003e\n\u003cli\u003eJ-Slot Slotted Friction Face\u003c\/li\u003e\n\u003cli\u003eOEM Fitment \u0026amp; Functionality\u003c\/li\u003e\n\u003cli\u003e72 Curved Vanes Force Cooling Air through Brake Disc\u003c\/li\u003e\n\u003cli\u003eFloating Bobbins Mounting System\u003c\/li\u003e\n\u003cli\u003eReplaceable Rotor Rings\u003c\/li\u003e\n\u003cli\u003eLeft\/Right Specific Rotors for Better Cooling (Unlike OE)\u003c\/li\u003e\n\u003cli\u003eLower Long-term Maintenance Cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e034Motorsport Stainless Steel Braided Brake Line Kit Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces Front \u0026amp; Rear Brake Hoses\u003c\/li\u003e\n\u003cli\u003eTeflon Lined, Stainless Steel Braided Hose\u003c\/li\u003e\n\u003cli\u003eApplication-Specific Fittings and Lengths\u003c\/li\u003e\n\u003cli\u003eManufactured to Meet or Exceed DOT Test and Construction Standards, But Are Not \"DOT Certified\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSTAGE 2 DYNAMIC+ BRAKING PACKAGE:\u003c\/strong\u003e\u003cbr\u003eFor those looking to further improve their braking performance and regularly attend HPDE events, the Stage 2 Dynamic+ Braking Package is just what you need! The rear OE 310mm brake rotor is increased to an impressive 350mm diameter which results in improved stopping power, heat management, and brake fade resistance, making it the ideal upgrade for those who like pushing their cars to the limit at the on backroads or at the track!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCONTENTS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-Piece Floating Front Brake Rotor Upgrade Kit for Audi 8V.5 RS3\u003c\/li\u003e\n\u003cli\u003e2-Piece Floating Rear Brake Rotor 350mm Upgrade for MQB VW \u0026amp; Audi\u003c\/li\u003e\n\u003cli\u003eStainless Steel Braided Brake Line Kit, 8S\/8V.5 Audi TT RS \u0026amp; RS3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePACKAGE FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight Construction\n\u003cul\u003e\n\u003cli\u003eFront Rotors: (22lb 034Motorsport Rotor vs. 27.3lb OE Audi Rotor)\u003c\/li\u003e\n\u003cli\u003eRear Rotors: (14lb 350mm 034Motorsport Rotor vs. 15lb 310mm OE Rotor)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases Rear OE 310mm Rotor Diameter to 350mm\u003c\/li\u003e\n\u003cli\u003eFloating, 2-Piece Design\u003c\/li\u003e\n\u003cli\u003eAerospace Grade Aluminum Hats with Type III Hard Anodizing**\u003c\/li\u003e\n\u003cli\u003eCM-250 Special Alloy Rotor Rings\u003c\/li\u003e\n\u003cli\u003eJ-Slot Slotted Friction Face\u003c\/li\u003e\n\u003cli\u003eOEM Fitment \u0026amp; Functionality\u003c\/li\u003e\n\u003cli\u003e72 Curved Vanes Force Cooling Air through Brake Disc\u003c\/li\u003e\n\u003cli\u003eFloating Bobbins Mounting System\u003c\/li\u003e\n\u003cli\u003eReplaceable Rotor Rings\u003c\/li\u003e\n\u003cli\u003eLeft\/Right Specific Rotors for Better Cooling (Unlike OE)\u003c\/li\u003e\n\u003cli\u003eLower Long-term Maintenance Cost\u003c\/li\u003e\n\u003cli\u003eReplaces Front \u0026amp; Rear Brake Hoses\u003c\/li\u003e\n\u003cli\u003eTeflon Lined, Stainless Steel Braided Hose\u003c\/li\u003e\n\u003cli\u003eApplication-Specific Fittings and Lengths\u003c\/li\u003e\n\u003cli\u003eManufactured to Meet or Exceed DOT Test and Construction Standards, But Are Not \"DOT Certified\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFITMENT\/APPLICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2017-2020 Audi 8V RS3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e**Please Note: Type III hard anodizing of aluminum is considered as a functional surface coating process. While we always aim for color consistency, color variations may exist from batch to batch due to the nature and variables in the anodizing process.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Stage 1","offer_id":50041435390246,"sku":"034-301-0015\/16","price":2206.0,"currency_code":"USD","in_stock":true},{"title":"Stage 2 Black","offer_id":50041435423014,"sku":"034-301-0015\/16","price":2463.0,"currency_code":"USD","in_stock":false},{"title":"Stage 2 Red","offer_id":50041435455782,"sku":"034-301-0015\/16","price":2463.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/files\/dynamic-plus-braking-package-for-audi-b9-b9-5-s4-s5-sq5-034-301-0015-dso-1_1.webp?v=1737573653"},{"product_id":"audi-b9-b9-5-front-brake-duct-upgrade","title":"Audi B9\/B9.5 Front Brake Duct Upgrade Kit","description":"\u003cp\u003eThis factory brake duct upgrade kit greatly decreases your brake temperatures by directing airflow toward your brake rotors and calipers. This kit uses only genuine Audi parts and is completely plug and play. The parts used in this kit are directly from the much higher performance RS6, RS7 and RSQ8 models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParts Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4M8615447A - Upper Left Brake Duct\u003c\/li\u003e\n\u003cli\u003e4M8615448A - Upper Right Brake Duct\u003c\/li\u003e\n\u003cli\u003e9Y0615447C - Lower Left Brake Duct\u003c\/li\u003e\n\u003cli\u003e9Y0615448C - Lower Right Brake Duct\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eIf you can jack up your car and remove the front wheel, you can easily install this kit. The brake ducts install by mounting the ducts to the control arms using the pre-attached heavy duty \"zip-ties.\" Simply place the ducts in place and tighten the \"zip-ties\" to fasten them into place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\/Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2017-2025 Audi B9\/B9.5 A4\u003c\/li\u003e\n\u003cli\u003e2017-2025 Audi B9\/B9.5 A4 Allroad\u003c\/li\u003e\n\u003cli\u003e2018-2025 Audi B9\/B9.5 A5\u003c\/li\u003e\n\u003cli\u003e2018-2025 Audi B9\/B9.5 S4\u003c\/li\u003e\n\u003cli\u003e2018-2025 Audi B9\/B9.5 S5\u003c\/li\u003e\n\u003cli\u003e2018-2025 Audi B9\/B9.5 RS5\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Assembled by NGP","offers":[{"title":"Default Title","offer_id":50409682534694,"sku":"AUDI-B9-BRK-DUCT-KIT","price":176.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/files\/2022-ngp-oval-logo_4_1024x1024_9f514f41-15db-4b73-abda-9517c1b80436.webp?v=1718120603"},{"product_id":"neuspeed-big-brake-upgrade-kit-porsche-macan-front-caliper-swap-audi-vw-mqb-vehicles","title":"NEUSPEED Big Brake Upgrade Kit Porsche Macan Front Caliper Swap - Audi\/VW MQB Vehicles","description":"\u003cp\u003eThe NEUSPEED Macan Brake Upgrade Kit provides big improvements for those upgrading their factory brake systems to the Porsche Macan Caliper Kit. This upgrade kit offers our Full-Floating, Two-Piece 345mm Brake Rotors, iSWEEP Performance Brake Pads in various compounds to meet your needs, and our famous made-to-order Stainless Steel Sport Brake Lines.\u003c\/p\u003e\n\u003cp\u003eThis brake kit is specifically designed for Audi\/VW (VAG) MQB (such as Mk7\/Mk7.5) vehicles using factory Porsche Macan 95B 4-Piston Front Calipers:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePorsche caliper part numbers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e95B-615-123-F\u003c\/li\u003e\n\u003cli\u003e95B-615-124-F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFULL-FLOATING 2-PIECE ROTORS\u003c\/strong\u003e\u003cbr\u003eBenefits of using a Full-Floating 2-Piece Rotor are reduced weight, lower risk of warping, increased airflow, better heat management\/dissipation, and cost savings over time.\u003c\/p\u003e\n\u003cp\u003eAluminum, by nature, weighs much less than a cast-iron rotor (factory type). With an aluminum center, this weight savings is unsprung and rotating. You can expect shorter stopping distances, quicker acceleration, better handling and cornering, and even improved fuel economy!\u003c\/p\u003e\n\u003cp\u003eAlong with reducing weight, our Full-Floating 2-Piece rotors also help with heat dissipation. Since the center of the rotor (hat) is not one piece with the ring, heat transfer is minimized. So, instead of it being one large steel disc that retains heat built up over time, the outer ring deals with heat maintenance while the inner hat can do its job at holding everything together.\u003c\/p\u003e\n\u003cp\u003eThe cast-iron disc can expand radially, or outwards, relative to the aluminum hat. The cast-iron disc will heat up (can reach more than 1100 degrees Fahrenheit), while the aluminum hat remains cool. Because of this, they're less likely to warp or crack from excessive heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFULL STAINLESS STEEL BRAKE LINES\u003c\/strong\u003e\u003cbr\u003eAt NEUSPEED, we're known for our custom brake lines and brake line fittings. Others make stainless steel \"braided\" brake lines, but they still use steel fittings which can easily corrode over time. NEUSPEED lines are the only ones in the US that utilize full stainless steel fittings, not just the hose.\u003c\/p\u003e\n\u003cp\u003eFor this Macan upgrade kit, we specially design the swivel fitting on the caliper side so the hose has a correct angle for the MK5\/6\/7 to eliminate any binding. Others just sell the extended version male fitting that is commonly used for Audi 8K\/B8 models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRotor Size: 345x30mm\u003c\/li\u003e\n\u003cli\u003eRotor Weight: 18.2 lbs. - (OEM: 26.6 lbs.)\u003c\/li\u003e\n\u003cli\u003e7075-T6 Alloy Hat (compared to competitors 6061-T6)\u003c\/li\u003e\n\u003cli\u003eStainless Steel D-Bobbin Hardware\u003c\/li\u003e\n\u003cli\u003eSlotted Pattern, Directional and Curved Veins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKIT INCLUDES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x Left 345x30mm Full-Floating 2-Piece Slotted Rotor\u003c\/li\u003e\n\u003cli\u003e1x Right 345x30mm Full-Floating 2-Piece Slotted Rotor\u003c\/li\u003e\n\u003cli\u003e1x Set of NEUSPEED Stainless Steel Sport Brake Lines\u003c\/li\u003e\n\u003cli\u003e1x Set of NEUSPEED Grade 5 Titanium Brake Pad Shims\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOther\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKit does NOT include wear sensor or sensor bypass\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\/Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eMk7 \/ Mk7.5 Golf 1.8T (2015-2021)\u003c\/li\u003e\n\u003cli\u003eMk7 \/ Mk7.5 GTI 2.0T (2015-2021)\u003c\/li\u003e\n\u003cli\u003eMk7 \/ Mk7.5 Golf Sportwagen (2015-2019)\u003c\/li\u003e\n\u003cli\u003eMk7 \/ Mk7.5 Golf Alltrack (2017-2019)\u003c\/li\u003e\n\u003cli\u003eMk7 Golf R (2015-2020)\u003c\/li\u003e\n\u003cli\u003eArteon (2019-2023)\u003c\/li\u003e\n\u003cli\u003eTiguan (2018-2024)\u003c\/li\u003e\n\u003cli\u003eAtlas (2018-2024)\u003c\/li\u003e\n\u003cli\u003eVW Mk7 GLI (2019+)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAudi A3 8V 1.8T \/ 2.0T (2015-2020)\u003c\/li\u003e\n\u003cli\u003eAudi S3 8V 2.0T (2015-2020)\u003c\/li\u003e\n\u003cli\u003eAudi TT 8S 2.0T (2015-2020)\u003c\/li\u003e\n\u003cli\u003eAudi TTS 8S 2.0T (2015-2020)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":51677906207014,"sku":"99.10.PM7","price":1044.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2131\/5878\/files\/99.10.PM7-neuspeed-porsche-macan-big-brake-upgrade-kit-vw-mqb.webp?v=1762793194"}],"url":"https:\/\/store.ngpracing.com\/collections\/brake-upgrades\/volkswagen-gti-mk8---2022--2-0t-gen4-tsi-esi9248635.oembed","provider":"New German Performance","version":"1.0","type":"link"}