42 Draft Designs - Mk4 5 / 6-speed - Shifter Cable Bushings - Complete kit 2002+
Unfortunately this product is on backorder with no known ETA.
Please note! During model year 2002 VW ditched the ball/socket style endlinks and shifter linkage in favor of simple pin/clip style connections. The old style endlinks and shifter linkage, pictured below will not accept these shifter bushings. If you have an early Mk4, the only option is to upgrade your linkages and end links to the pin/clip style. It's very important that you look at your linkage before ordering. Many years share the same parts, but the differences between the full sets are enough to cause frustration when you end up with the wrong parts. You may have the ball/socket style endlinks, regardless of vehicle model year. VW did not make the change abruptly. In all of 42's research they found almost all Mk4 generation cars switched to the pin/clip style endlinks during 2002.
Includes both front to back and side to side bushings for a complete upgrade!
These 42DD CNC machined shifter cable bushings tighten up the movement of your shifter cables, literally improving the connection between your hand and the gears. In a performance situation, the factory rubber bushings flex causing a delay in the engagement in the gears. These bushings eliminate this delay and provide a precision shift free of slop or hesitation.
he 42DD shifter cable bushings are CNC machined from 6061 aluminum and fit precisely within the factory endlink. Each bushing is sleeved with an oil-impregnated bronze bearing. This bearing provides constant lubrication and a lifetime of use without wear.
Sold individually or as a set, these shifter cable bushings provide instant results. Installation is a simple task and requires only slight modification to the side/side endlink. If you're looking to feel your shifts, these bushings are the answer!
- *2002.5 to 2005 VW Mk4 Golf, Jetta, GTI 2.0T with 5 or 6 speed manual transmission
- The Mk4 front/back endlink is square and accepts a version of our round bushing. The pin diameter is roughly 10mm. This front/back endlink connects directly to the weighted shift linkage. It is used on all mk4 5 & 6 speed transmissions after 2002.5.
- The Mk4 side/side endlink is square and accepts a version of our round bushing. The pin diameter is roughly 8mm. This side/side endlink connects directly to the metal side/side linkage. It is used on all mk4 5 & 6 speed transmissions after 2002.5.
*Please verify that your vehicle is truly a 2002.5+ before ordering! If you have any questions, feel free to contact us.
|Brand||42 Draft Designs|